구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)

  • 제30권1호
  • /
  • Pages.23-27
  • /
  • 2014
  • /
  • 2384-4353(pISSN)
  • /
  • 2384-4272(eISSN)
대한턱관절교합학회 (Korean Academy of Stomatognathic Function and Occlusion)
권호 표지
DOI QR코드

DOI QR Code

요오드 소독제에 침전된 고무인상재의 체적안정성

Dimensional stability of rubber impression materials immersed in iodophor disinfectant

  • 최미라 (한림대학교 강동성심병원 치과보철과) ;
  • 박찬진 (강릉원주대학교 치과대학 치과보철학교실 및 구강과학연구소)
  • Choi, Mee-Ra (Department of Prosthodontics, Gangdong-Seongsim Hospital, Hallym University) ;
  • Park, Chan-Jin (Department of Prosthodontics and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University)
  • 투고 : 2014.01.25
  • 심사 : 2014.03.03
  • 발행 : 2014.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

목적: 요오드계 소독제의 고무인상체 안정성에 미치는 영향을 조사하고자 하였다. 연구 재료 및 방법: 폴리설파이드, 실리콘, 폴리이써 고무인상재를 이용하여 72개의 인상체를 채득하였다. 이를 요오드계 소독제인 iodophor 수용액에 각각 10분, 30분간 침적시키고 모형을 제작하여 대조군과 광학현미경을 이용하여 체적 안정성을 평가하였다. 결과: 모든 고무인상체는 0.5% 미만의 체적변화를 보였으나 30분 침적은 10분 침적에 비해 통계적으로 유의하게 변화량이 증가하였다(P < 0.05). 결론: 요오드계 소독제에 고무인상재를 침적시 10분정도의 시간경과가 고무인상재의 체적변화에 영향이 적었다.

Purpose: The purpose of this study was to determine the dimensional stability of three rubber impression materials (polysulfide, polyvinylsiloxane, polyether) in an iodophor disinfectant. Materials and Methods: Seventy-two impressions were made with each material and divided into control, 10-minute, and 30-minute immersion groups using an iodophor as the disinfectant. A microscope was used to measure dimensional changes in the stone casts made from each group of impressions, and the percent change was analyzed using a two-way ANOVA (P = 0.05). Results: All dimensional changes after iodophor disinfection were small in 10 minute groups, however, showed significantly increased in 30 minute groups (P < 0.05). Conclusion: Clinically, it can be recommended to use iodophor disinfectant for rubber materials within 10 minute.

키워드

참고문헌

  1. Infection control recommendations for the dental office and the dental laboratory. Council on Dental Materials, Instruments, and Equipment. Council on Dental Practice. Council on Dental Therapeutics. J Am Dent Assoc 1988;116:241-8. https://doi.org/10.14219/jada.archive.1988.0341
  2. Rowe AH, Forrest JO. Dental impressions. The probability of contamination and a method of disinfection. Br Dent J I978;145:184-6. https://doi.org/10.1038/sj.bdj.4804140
  3. Leung RL, Schonfeld SE. Gypsum casts as a potential source of microbial cross-contamination. J Prosthet Dent 1983;49:210-1. https://doi.org/10.1016/0022-3913(83)90503-6
  4. Herrera SP, Merchant VA. Dimensional stability of dental impressions after immersion disinfection. J Am Dent Assoc 1986;113:419-22. https://doi.org/10.14219/jada.archive.1986.0214
  5. Johansen RE, Stackhouse JA Jr. Dimensional changes of elastomers during cold sterilization J Prosthet Dent 1987:57:233-6. https://doi.org/10.1016/0022-3913(87)90152-1
  6. Vergani CE, Seo RS, Pavarina AC, dos Santos Nunes Reis JM. Flexural strength of autopolymerizing denture reline resins with microwave post-polymerization treatment. J Prosthet Dent 2005;93:577-83. https://doi.org/10.1016/j.prosdent.2005.03.014
  7. Durr DP, Novak EV. Dimensional stability of alginate impressions immersed in disinfecting solutions. ASDC J Dent Child 1987;54:45-8.
  8. Bergman B, Bergman M, Olsson S. Alginate impression materials, dimensional stability and surface detail sharpness following treatment with disinfectant solutions. Swed Dent J 1985;9:255-62.
  9. Bergman M, Olsson S. Bergman B. Elastomeric impression materials. Dimensional stability and surface detail sharpness following treatment with disinfection solutions. Swed Dent J 1980:4:161-7.
  10. Minagi S, Sukushima K, Maeda N. Disinfection method for impression materials: freedom from fear of hepatitis B and acquired immunodeficiency syndrome. J Prosthet Dent l986;56:451-4. https://doi.org/10.1016/0022-3913(86)90387-2
  11. Minagi S, Yano N, Yoshida K, Tsuru H. Prevention of acquired immunodeficiency syndrome and hepatitis B. II. Disinfection method for hydrophillic impression materials. J Prosthet Dent 1987;58:462-5. https://doi.org/10.1016/0022-3913(87)90277-0
  12. Harrison Z, Johnson A, Douglas CW. An in vitro study into the effect of a limited range of denture cleaners on surface roughness and removal of Candida albicans from conventional heat-cured acrylic resin denture base material. J Oral Rehabil 2004;31:460-7. https://doi.org/10.1111/j.1365-2842.2004.01250.x
  13. Guidelines for infection control in the dental office and the commercial dental laboratory. Council on Dental Therapeutics. Council on Prosthetic Services and Dental Laboratory Relations. J Am Dent Assoc 1985;110:969-72. https://doi.org/10.14219/jada.archive.1985.0016
  14. Council adopts American Dental Association Specification No. 8 (dental zinc phosphate cement) and 11 (agar impression material). Council on Dental Materials and Devices J Am Dent Assoc 1967;74:1565-73. https://doi.org/10.14219/jada.archive.1967.0412
  15. Newman SM, Crowder JW, Nicholas CA. Gypsum die materials: setting expansion and relative hardness. J Tenn Dent Assoc 1985;65:35-7.
  16. Giblin J, Podesta R, White J. Dimensional stability of impression materials immersed in an iodophor disinfectant. Int J Prosthodont 1990;3:72-7.
  17. Townsend JD, Nicholls JI. The effect of disinfectants on the accuracy of hydrocolloid impression materials. IADR Abstract No. 202. J Dent Res (special issue) 1988;67:13B.