DOI QR코드

DOI QR Code

Measurement of Laminar Flame Speeds of Dimethyl Ether-Air Mixtures at High Pressure

고압에서 DME-Air 혼합기의 화염속도 측정

  • 이수각 (안동대학교 기계공학과) ;
  • 이기용 (안동대학교 기계공학과)
  • Received : 2013.11.02
  • Accepted : 2013.12.06
  • Published : 2014.03.31

Abstract

Spherically expanding flames are used to measure flame speeds, which are derived the corresponding laminar flame speeds at zero stretch. Dimethyl Ether-Air mixtures at high pressure are studied over an extensive range of equivalence ratios. The classical shadowgraph technique is used to detect the reaction zone. In analytical methodology the optimization process using least mean squares is performed to extract the laminar flame speeds. It is seen that the laminar flame speed of DME-Air mixture with the increase of pressure decreases rapidly showing a similar trend to other hydrocarbon fuels. At pressure of 2 and 10 atm the experimental data from the present study agree well with results reported in the literature. Especially the laminar flame speeds at 2 atm are in good agreement with those calculated in numerical work over the full stoichiometric range. At elevated pressure of 12 atm the measured data are slightly slower at fuel lean condition and show close agreement at fuel rich condition when compared with the numerical results.

Keywords

References

  1. W. S. Baek, W. J. Cho, "The Status of DME Development and Utilization as a Fuel", KIC News, Vol. 13, No. 2, 2010, pp.1-6.
  2. Qin X and Ju Y, "Measurement of burning velocities of dimethyl ether and air premixed flames at elevated pressures", Proceedings of the Combustion Institute, Vol. 30, 2005, pp. 233-240. https://doi.org/10.1016/j.proci.2004.08.251
  3. Zhao Z, Chaos M, Kazakov A and Dryer, FL, "Thermal decomposition reaction and a comprehensive kinetic model of Dimethyl Ether," International Journal of Chemical Kinetics, Vol. 104, no. 35, 2008, pp. 1-18.
  4. W. B. Lowry, Z. Serinyel, M. C. Krejci, H. J. Curran, G. Bourque, E. L. Petersen, "Effect of methane-dimethyl ether fuel blends on flame stability, laminar flame speed and Markstein length", Proceedings of the Combustion Institute, Vol. 33, 2011, pp. 929-937. https://doi.org/10.1016/j.proci.2010.05.042
  5. J.D. Vries, W. B. Lowry, Z. Serinyel, H. J. Curran, E. L. Petersen, "Laminar flame speed measurements of dimethyl ehter in air at pressures up to 10atm", Fuel, Vol. 90, 2011, pp. 331-338. https://doi.org/10.1016/j.fuel.2010.07.040
  6. Z. Chen, C. Tang, J. Fu, X. Jiang, Q. Li, L. Wei and Z. Huang, "Experimental and numerical investigation on diluted DME flames: Thermal and chemical kinetic effects on laminar flame speeds", Fuel, Vol. 102, 2012, pp. 567-573. https://doi.org/10.1016/j.fuel.2012.06.003
  7. S. G. Lee and K. Y. Lee, "The Development of the Short Mechanism for Premixed Dimethyl Ether-Air Flames", The 44th KOSCO Symposium, November 2012.
  8. Halter F, Chauvean C, Djebaili-Chaumeix C and Gokalp I, "Characterization of the effects of pressure and hydrogen concentration on laminar burning velocities of methane-hydrogen-air mixture", Proceedings of the Combustion Institute, Vol. 30, 2005, pp. 201-208. https://doi.org/10.1016/j.proci.2004.08.195
  9. CHEMKIN-PRO, Reaction Design Inc., San Diego, CA 92121, USA http://www.reactiondesign.com.
  10. T. Nagy and T. Yuranyi, "Reduction of very large reaction mechanisms using methods based on simulation error minimization", Combustion and Flame, Vol. 156, 2009, pp. 417-428. https://doi.org/10.1016/j.combustflame.2008.11.001
  11. Clavin P, "Dynamic behavior of premixed flame fronts in laminar and turbulent flows," Progress in Energy and Combustion Science, Vol. 11, pp. 1-59.
  12. Huang ZH, Wang Q, Yu Jr, "Measurement of laminar burning velocity of demethyl ether/air premixed mixtures," Fuel, 2007, Vol. 86, pp. 2360-2366. https://doi.org/10.1016/j.fuel.2007.01.021
  13. Chen Z, Wei D, Huang ZH, Miao H, Wang X and Jiang D, "Measurement of laminar burning velocity of demethyl ether/air premixed mixtures with $N_2$ and $CO_2$ dilution", Energy, 2009, Vol. 23, pp.735-739.