DOI QR코드

DOI QR Code

Optimal design of floating substructures for spar-type wind turbine systems

  • Choi, Ejae (School of Mechanical Engineering, Pusan National University) ;
  • Han, Changwan (School of Mechanical Engineering, Pusan National University) ;
  • Kim, Hanjong (School of Mechanical Engineering, Pusan National University) ;
  • Park, Seonghun (School of Mechanical Engineering, Pusan National University)
  • 투고 : 2012.07.31
  • 심사 : 2013.11.06
  • 발행 : 2014.03.25

초록

The platform and floating structure of spar type offshore wind turbine systems should be designed in order for the 6-DOF motions to be minimized, considering diverse loading environments such as the ocean wave, wind, and current conditions. The objective of this study is to optimally design the platform and substructure of a 3MW spar type wind turbine system with the maximum postural stability in 6-DOF motions as well as the minimum material cost. Therefore, design variables of the platform and substructure were first determined and then optimized by a hydrodynamic analysis. For the hydrodynamic analysis, the body weight of the system was considered, and the ocean wave conditions were quantified to the wave forces using the Morison's equation. Moreover, the minimal number of computation analysis models was generated by the Design of Experiments (DOE), and the design variables of the platform and substructure were finally optimized by using a genetic algorithm with a neural network approximation.

키워드

과제정보

연구 과제 주관 기관 : KETEP, NRF

참고문헌

  1. Agarwal, A. and Jain, A. (2003), "Dynamic behavior of offshore spar platforms under regular sea waves", Ocean Eng., 30(4), 487-516. https://doi.org/10.1016/S0029-8018(02)00034-3
  2. Boom, W.D., Pinkster, J. and Tan, S. (1983), "Motion and tether force prediction for a deepwater tension leg platform", Proceedings of the Offshore Technology Conference.
  3. Burns, G.E. (1983), "Calculating viscous drift of a tension leg platform", Proceedings of the 2nd International Offshore Mechanics and Arctic Engineering Symposium, Houston, Texas, February.
  4. Chitrapu, A. and Ertekin, R. (1992), Effect of nonlinear drag forces on the low-and high-frequency response of floating platforms.
  5. Chitrapu, A., Ertekin, R. and Paulling, J. (1993), "Viscous drift forces in regular and irregular waves", Ocean Eng., 20(1), 33-55. https://doi.org/10.1016/0029-8018(93)90045-J
  6. Chitrapu, S. (1992), Nonlinear forces and response of floating platforms in regular and random waves.
  7. Chou, F.S., Ghosh, S. and Huang, E.W. (1983), Conceptual design process of a tension leg platform, Society of Naval Architects and Marine Engineers.
  8. Cummins, W. (1962), The impulse response function and ship motions, DTIC Document.
  9. De Kat, J.O. and Paulling, J.R. (1989), "The simulation of ship motions and capsizing in severe seas", T. Soc. Naval Archit. Marine Engineers, 97, 139-168.
  10. Donley, M. and Spanos, P. (1992), "Stochastic response of a tension leg platform to viscous and potential drift forces", Proceedings of the 11th Int. Offshore Mech. and Arctic Engineering Conf, New York, NY.
  11. Ertekin, R. and Chitrapu, A. (1988), "Wave-and current-induced viscous drift forces on floating platforms", Offshore Engineering (Eds. Cameiro, F.L.L.B., Ferrante, A.J. and Batista, R.C.), 6, 615-629.
  12. Faltinsen, O. (1990), "Wave loads on offshore structures", Annu. Rev. Fluid Mech., 22(1), 35-56. https://doi.org/10.1146/annurev.fl.22.010190.000343
  13. Finnigan, T., Petrauskas, C. and Botelho, D. (1984), "Time-domain model for TLP surge response in extreme sea states", Proceedings of the Offshore Technology Conference.
  14. Gao, Z.I. and Zou, Z.J. (2008), "A three-dimensional desingularized high order panel method based on NURBS", J. Hydrodynamics, Ser. B, 20(2), 137-146. https://doi.org/10.1016/S1001-6058(08)60039-6
  15. Haug, A. and Fjeld, S. (1996), "A floating concrete platform hull made of lightweight aggregate concrete", Eng. Struct., 18(11), 831-836. https://doi.org/10.1016/0141-0296(95)00160-3
  16. Hildebrand, F. (1974), Introduction to numerical analysis, international series in pure and applied mathematics, McGraw-Hill, New York.
  17. Hong, H., Park, J., Bang, J., Ryu, J. and Kim, D. (2006), "Research for 2 MW wind turbine tower shell design optimization", J Korean SOC New & Renew Energ, 19-26.
  18. Hua, J. (2011), "A floating platform of concrete for offshore wind turbine", J. Renew. Sust. Energ. Rev., 3(6), 063103-063103-063113. https://doi.org/10.1063/1.3658434
  19. Huang, X., Hoff, J. and Naess, A. (1982), "Loads and motions measured on a semisubmersible having a large permanent list angle", Norwegian Maritime Res., 10(2), 24-33.
  20. Jiang, T. and Schellin, T. (1990), "Motion prediction of a single-point moored tanker subjected to current, wind and waves", J. Offshore Mech. Arct., 112(2), 83-90. https://doi.org/10.1115/1.2919840
  21. Kim, M. and Yue, D. (1991), Sum and difference -frequency wave loads on a body in unidirectional Gaussian seas.
  22. Kobayashi, M., Shimada, K. and Fujihira, T. (1987), "Study on dynamic responses of a TLP in waves", J. Offshore Mech. Arct., 109(1), 61-66. https://doi.org/10.1115/1.3256991
  23. Kurian, V., Ng, C. and Liew, M. (2012a), "Experimental investigation on dynamic responses of spar platforms subjected to multi-directional waves", Proceedings of the Business Engineering and Industrial Applications Colloquium (BEIAC), 2012 IEEE.
  24. Kurian, V., Ng, C. and Liew, M. (2012b), "Numerical investigation on dynamic responses of classic spar platforms: Long crested waves vs. short crested waves", Proceedings of the Humanities, Science and Engineering (CHUSER), 2012 IEEE Colloquium on.
  25. Kurian, V.J., Tuhaijan, S.N.A. and Liew, M.S. (2012), "Dynamic responses of spar acted upon by random wave and current", Proceedings of the Business Engineering and Industrial Applications Colloquium (BEIAC), 2012 IEEE, 7-8 April.
  26. Lee, J.H., Kim, M., Park, S., Kang, J.K., and Lee, S. (2009), "Optimum bar-feeder support positions of a miniature high speed spindle system by genetic algorithm", Precis Eng., 26, 99-107.
  27. Leung, D.Y. and Yang, Y. (2012), "Wind energy development and its environmental impact: a review", Renew. Sust. Energ. Rev., 16(1), 1031-1039. https://doi.org/10.1016/j.rser.2011.09.024
  28. Ma, Q. and Patel, M. (2001), "On the non-linear forces acting on a floating spar platform in ocean waves", Appl. Ocean Res., 23(1), 29-40. https://doi.org/10.1016/S0141-1187(00)00025-0
  29. Moe. (2010), "Floating turbine captures wind energy in deep-water environment", Weld J., 89(5), 54-58.
  30. Robertson, A.N. and Jonkman, J.M. (2011), Loads analysis of several offshore floating wind turbine concepts, National Renewable Energy Laboratory, US Department of Energy, Office of Energy Efficiency and Renewable Energy.
  31. Snyder, B. and Kaiser, M. J. (2009), "Ecological and economic cost-benefit analysis of offshore wind energy", Renew. Energ., 34(6), 1567-1578. https://doi.org/10.1016/j.renene.2008.11.015
  32. Tavner, P. (2008), "Wind power as a clean-energy contributor", Energy Policy, 36(12), 4397-4400. https://doi.org/10.1016/j.enpol.2008.09.033
  33. Wang, L. and Sweetman, B. (2012), "Simulation of large-amplitude motion of floating wind turbines using conservation of momentum", Ocean Eng., 42, 155-164. https://doi.org/10.1016/j.oceaneng.2011.12.004
  34. Yilmaz, O. and Incecik, A. (1996), "Hydrodynamic design of moored floating platforms", Mar. Struct., 9(5), 545-575. https://doi.org/10.1016/0951-8339(95)00011-9

피인용 문헌

  1. Dynamic reliability analysis of offshore wind turbine support structure under earthquake vol.21, pp.6, 2015, https://doi.org/10.12989/was.2015.21.6.609
  2. Parallel Analysis of Offshore Wind Turbine Structures under Ultimate Loads vol.9, pp.21, 2014, https://doi.org/10.3390/app9214708
  3. Structural Modeling and Failure Assessment of Spar-Type Substructure for 5 MW Floating Offshore Wind Turbine under Extreme Conditions in the East Sea vol.14, pp.20, 2014, https://doi.org/10.3390/en14206571