Structural Engineering and Mechanics

  • 제50권2호
  • /
  • Pages.151-161
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Simulation, analysis and optimal design of fuel tank of a locomotive

  • Yousefi, A. Karkhaneh (Department of Mechanical Engineering, Isfahan University of Technology) ;
  • Nahvi, H. (Department of Mechanical Engineering, Isfahan University of Technology) ;
  • Panahi, M. Shariat (School of Mechanical Engineering, Faculty of Engineering, University of Tehran)
  • 투고 : 2012.12.22
  • 심사 : 2014.02.21
  • 발행 : 2014.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, fuel tank of the locomotive ER 24 has been studied. Firstly the behavior of fuel and air during the braking time has been investigated by using a two-phase model. Then, the distribution of pressure on the surface of baffles caused by sloshing has been extracted. Also, the fuel tank has been modeled and analyzed using Finite Element Method (FEM) considering loading conditions suggested by the DIN EN 12663 standard and real boundary conditions. In each loading condition, high stressed areas have been identified. By comparing the distribution of pressure caused by sloshing phenomena and suggested loading conditions, optimization of the tank has been taken into consideration. Moreover, internal baffles have been investigated and by modifying their geometric properties, search of the design space has been done to reach the optimal tank. Then, in order to reduce the mass and manufacturing cost of the fuel tank, Non-dominated Sorting Genetic Algorithm (NSGA-II) and Artificial Neural Networks (ANNs) have been employed. It is shown that compared to the primary design, the optimized fuel tank not only provides the safety conditions, but also reduces mass and manufacturing cost by %39 and %73, respectively.

키워드

참고문헌

  1. Akyildiz, H. and Unal, N.E. (2006), "Sloshing in a three-dimensional rectangular tank: numerical simulation and experimental validation", Ocean Eng., 33, 2135-2149. https://doi.org/10.1016/j.oceaneng.2005.11.001
  2. Aliabadi, S., Johnson, A. and Abedi, J. (2003), "Comparison of finite element and pendulum models for simulation of sloshing", Comput. Fluids, 32, 535-545. https://doi.org/10.1016/S0045-7930(02)00006-3
  3. Biswal, K.C., Bhattacharyya, S.K. and Sinha, P.K. (2006), "Non-linear sloshing in partially liquid filled containers with baffles", Int. J. Numer. Meth. Eng., 68, 317-337. https://doi.org/10.1002/nme.1709
  4. Cheng, X., Hu, M. and Wen, J. (2008), "Dynamic characteristics of liquid sloshing in a transversely vibrating spherical tank with a spacer under low gravity", J. Hydrodynam., Ser. B, 20, 762-769. https://doi.org/10.1016/S1001-6058(09)60013-5
  5. Coello, C.A. (1999), "A comprehensive survey of evolutionary based multiobjective optimization techniques", Knowl. Inf. Syst., 3, 269-308.
  6. Craig, K.J. and Kingsley, T.C. (2007), "Design optimization of containers for sloshing and impact", Struct. Multidisc. Optim. 33, 71-87.
  7. DIN EN 12663 (2000), Railway Applications- Structural Requirements of Railway Vehicle Bodies.
  8. Eswaran, M., Saha, U.K. and Maity, D. (2009), "Effect of baffles on a partially filled cubic tank: numerical simulation and experimental validation", Comput. Struct., 87, 198-205. https://doi.org/10.1016/j.compstruc.2008.10.008
  9. Goudarzi, M.A., Sabbagh-Yazdi, S.R. and Marx, W. (2010), "Investigation of sloshing damping in baffled rectangular tanks subjected to the dynamic excitation", Bull. Earthq. Eng., 8, 1055-1072. https://doi.org/10.1007/s10518-009-9168-8
  10. Horn, J., Nafpliotis, N. and Goldberg, D.E. (1994), "A niched pareto genetic algorithm for multiobjective optimization", Proceedings of the First IEEE Conference on Evolutionary Computation, IEEE World Congress on Computational Intelligence, 1, IEEE Service Centre, Piscataway, NJ.
  11. Hornik, K., Stinchcombe, M. and White, H. (1989), "Multilayer feedforward networks are universal approximators", Neural Networks, 2, 359-366. https://doi.org/10.1016/0893-6080(89)90020-8
  12. Jin, Y., Olhofer, M. and Sendhoff, B. (2002), "A framework for evolutionary optimization with approximate fitness functions", IEEE Tran. Evol. Comput., 6(5), 481-494. https://doi.org/10.1109/TEVC.2002.800884
  13. Kim, H.S. and Lee, Y.S. (2008), "Optimization design technique for reduction of sloshing by evolutionary methods", Mech. Sci. Technol., 22, 25-33. https://doi.org/10.1007/s12206-007-1003-z
  14. Knowles, J. and Corne, D. (1999), "The pareto archived evolution strategy: a new baseline algorithm for multiobjective optimization", Proceedings of the Congress on Evolutionary Computation, IEEE Service Center, Piscataway, NJ.
  15. Lee, D.H., Kim, M.H., Kwon, S.H., Kim, J.W. and Lee, Y.B. (2007), "A parametric sensitivity study on LNG tank sloshing loads by numerical simulations", Ocean Eng., 34, 3-9. https://doi.org/10.1016/j.oceaneng.2006.03.014
  16. Liew, K.M., Ray, T., Tan, H. and Tan, M.J. (2002), "Evolutionary optimization and use of neural network for optimum stamping process design for minimum spring-back", Comput. Inf. Sci. Eng., 2, 38-44. https://doi.org/10.1115/1.1482399
  17. Liu, D. and Lin, P. (2009), "Three-dimensional liquid sloshing in a tank with baffles", Ocean Eng., 36, 202-212. https://doi.org/10.1016/j.oceaneng.2008.10.004
  18. Livaoglu, R. and Dogangun, A. (2007), "Effect of foundation embedment on seismic behavior of elevated tanks considering fluid-structure-soil interaction", Soil Dyn. Earthq. Eng., 27, 855-863. https://doi.org/10.1016/j.soildyn.2007.01.008
  19. Lloyd, N., Vaiciurgis, E. and Langrish, T. (2002), "The effect of baffle design on longitudinal liquid movement in road tankers: an experimental investigation", Tran. I. Chem. E., Part B, 80, 181-185.
  20. Mitra, S. and Sinhamahapatra, K.P. (2007), "Slosh dynamics of liquid-filled containers with submerged components using pressure-based finite element method", Sound Vib., 304, 361-381. https://doi.org/10.1016/j.jsv.2007.03.014
  21. Mitra, S. and Sinhamahapatra, K.P. (2008), "2D simulation of fluid-structure interaction using finite element method", Finite Elem. Anal. Des., 45, 52-59. https://doi.org/10.1016/j.finel.2008.07.006
  22. Panigrahy, P.K., Saha, U.K. and Maity, D. (2009), "Experimental studies on sloshing behavior due to horizontal movement of liquids in baffled tanks", Ocean Eng., 36, 213-222. https://doi.org/10.1016/j.oceaneng.2008.11.002
  23. Popov, G., Sankar, S., Sankar, T.S. and Vatistas, V.H. (1992), "Liquid sloshing in rectangular road containers", Comput. Fluid., 21, 551-569. https://doi.org/10.1016/0045-7930(92)90006-H
  24. Ray, T., Gokarn, R.P. and Sha, O.P. (1996), "Neural network applications in naval architecture and marine engineering", Artif. Intell. Eng., 1, 213-226.
  25. Rebouillat, S. and Liksonov, D. (2010), "Fluid-structure interaction in partially filled liquid containers: a comparative review of numerical approaches", Comput. Fluid., 39, 739-746. https://doi.org/10.1016/j.compfluid.2009.12.010
  26. Schotte, J.S. and Ohayon, R. (2009), "Various modelling levels to represent internal liquid behaviour in the vibration analysis of complex structures", Comput. Meth. Appl. Mech. Eng., 198, 1913-1925. https://doi.org/10.1016/j.cma.2008.12.016
  27. Shekari, M.R, Khaji, N. and Ahmadi, M.T. (2009), "A coupled BE-FE study for evaluation of seismically isolated cylindrical liquid storage tanks considering fluid-structure interaction", J. Fluids Struct., 25, 567-585. https://doi.org/10.1016/j.jfluidstructs.2008.07.005
  28. Souto-Iglesias, A., Delorme, L., Perez-Rojas, L. and Abril-Perez, S. (2006), "Liquid moment amplitude assessment in sloshing type problems with smooth particle hydrodynamics", Ocean Eng., 33, 1462-1484. https://doi.org/10.1016/j.oceaneng.2005.10.011
  29. Srinivas, V. and Deb, K. (1994), "Multiobjective optimization using nondominated sorting in genetic algorithms", J. Evolut. Comput., 2(3), 221-248. https://doi.org/10.1162/evco.1994.2.3.221
  30. Veldman, A.E.P., Gerrits, J., Luppes, R., Helder, J.A. and Vreeburg, J.P.B. (2007), "The numerical simulation of liquid sloshing on board spacecraft", J. Comput. Phys., 224, 82-99. https://doi.org/10.1016/j.jcp.2006.12.020
  31. Wei, W., Junfeng, L. and Tianshu, W. (2008), "Modal analysis of liquid sloshing with different contact line boundary conditions using FEM", Sound Vib., 317, 739-759. https://doi.org/10.1016/j.jsv.2008.03.070

피인용 문헌

  1. Effect of higher modes and multi-directional seismic excitations on power plant liquid storage pools vol.8, pp.3, 2015, https://doi.org/10.12989/eas.2015.8.3.779