DOI QR코드

DOI QR Code

Design of Waveguide Low Pass Filter using Rectangular Rings and Ridges

직사각형 링과 리지 구조를 이용한 도파관 저역통과 여파기 설계

  • 오택균 (단국대학교 전자전기공학과) ;
  • 최학근 (단국대학교 전자전기공학과) ;
  • 이형기 ((주) 하이게인 안테나)
  • Received : 2013.12.30
  • Accepted : 2014.02.07
  • Published : 2014.02.28

Abstract

In this paper, a novel waveguide low pass filter for satellite communication is proposed. The proposed low pass filter is designed to obtain wideband characteristics without the interference of higher order modes, sufficient attenuation in the stop-band and small sized lightweight characteristics by evanescent-mode ridge structure. To improve return loss and rejection loss, rectangular ring is inserting around the ridges in the waveguide. Input and output ports of the low pass filter is designed by using the impedance step structure for the impedance matching of the filter. The proposed waveguide low pass filter is fabricated and then measured as return loss over 19.5 dB, insertion loss less than 1.41 dB at the pass-band of 7.25 ~ 8.4 GHz and rejection loss over 67.2 dB at the stop-band of 12.25 ~ 14.5 GHz.

본 논문에서는 위성통신 시스템에 사용 가능한 새로운 구조의 도파관 저역통과 여파기를 제안하였다. 제안된 저역통과 여파기는 고차모드의 간섭이 없는 광대역 특성과 저지대역에서의 충분한 감쇠 그리고 도파관의 소형화와 경량화를 위하여 evanescent-mode 리지 구조를 사용하여 설계 하였고, 도파관 내에 리지를 둘러싸는 직사각형 링을 삽입하여 반사손실과 격리도를 향상시켰다. 또한 매칭을 위해 여파기의 입출력 포트 단은 임피던스 스텝 구조를 사용하여 설계하였다. 제작된 저역통과 여파기는 통과 대역 주파수인 7.25 ~ 8.4 GHz에서 반사손실이 19.5 dB이상, 삽입손실은 1.41 dB이하로 측정 되었으며 억제 대역 주파수인 12.25 ~ 14.5 GHz에서의 격리도는 67.2 dB이상을 만족하였다.

Keywords

References

  1. Hwe-Jong Kim, Hak-Keun Choi, "Design of Low Pass Filters Using Corrugated Waveguide for Satellite Communications", Journal of The Institute of Internet, Broadcasting and Communication, vol. 13, np.2, pp. 41-46, April 2013.
  2. W. Hauth, R. Keller, and U. Rosenberg, "CAD of waveguide low-pass filters for satellite applications", 17th EuMc Proc., pp. 151-156, Rome 1987.
  3. A. M. K. Saad, "Novel Lowpass Harmonic Filters for Satellite Application", in IEEE MTT-S Int. Microwave Symp. Dig., pp.292-294, June 1984.
  4. G. L. Matthaei, L. Young and E. M. T. Jones, "Microwave Filters, Impedance-Matching Networks, and Coupling Structures", McGraw-Hill, pp. 355-409, 937-952, New York 1964.
  5. E. D. Sharp, "A high power wide-band waffle-iron filter", IEEE Trans., vol. MTT-11, pp. 111-116, Mar 1963.
  6. R. Levy, "Tapered Corrugated Waveguide Low-Pass Filters", IEEE Trans. on Microwave Theory and Tech., vol. 21, pp. 526-532, Aug 1973. https://doi.org/10.1109/TMTT.1973.1128052
  7. S. B. Cohn, "Analysis of a Wide-Band Waveguide Filter." Proceeding of The I. R. E.
  8. S. B. Chon, "Properties of ridge waveguide", Proc. IRE, vol 35, pp. 783-788, Aug 1947.
  9. S. Hoefer, "The design of ridged waveguides", IEEE Trans. Microwave Theory Tech., vol. MTT-3, pp. 20-29, Oct 1955.
  10. J. R. Pyle, "The cutoff wavelength of the Te10 mode in ridged rectangular waveguide of any aspect ratio", IEEE Trans. Microwave Theory Tech., vol. MTT-14, no.4, pp. 175-183, 1966.
  11. R. V. Snyder, "New applications of evanescent mode waveguide to filter design", IEEE Trans. Microwave Theory Tech., vol. MTT-25, pp. 1013-1021, Dec 1977.
  12. J. Bomemann and F. Amdt, "Rigorous design of evanescent-mode E-plane finned waveguide bandpass filters", in 1989 IEEE MTT-S Inr. Microwave Symp. Dig., pp. 603-606, June 1989.
  13. A. Kirilenko, L. Rud, V. Tkachenko and D. Kulik, "Design of Bandpass and Lowpass Evanescent-mode Filters on Ridged Waveguides", Proceedings of the 29th European Microwave Conference, Vol. 3, pp. 239-242, 1999.
  14. J. Uhler, J. Bornemann, U.Rosenberg, "Waveguide components for Antenna Feed Systems: Theory and CAD", Artech House, Inc., Norwood, pp. 139-154, 1993.
  15. J. Bomemann, F. Arndt, "Modal S-matrix design of metal finned waveguide components and its application to transformers and filters", IEEE Transactions on Microwave Theory and Techniques, pp. 1528-1537, Jul 1992