Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Injection Molding Machine Simulation Model Based on Hydraulic Circuit, and Operating Characteristic Examination

유압회로를 기반으로 한 사출성형기의 해석모델 개발 및 공정 별 특성검토

  • Noh, Daekyung (Department of Mechanical Engineering, Graduate School, Gachon University) ;
  • Jang, Joosup (Department of Mechanical & Automotive Engineering, Gachon University) ;
  • Uh, Seungyong (R&D Center, Woojin Plaimm Company)
  • 노대경 (가천대학교 대학원 기계공학과) ;
  • 장주섭 (가천대학교 기계자동차공학과) ;
  • 어승룡 (우진플라임 기술연구소)
  • Received : 2013.04.26
  • Accepted : 2013.11.05
  • Published : 2014.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Vehicle industry is developing research for producing high quality injection molded product. The main objective of this study is providing information about hydraulic system for researchers who are involved in the other fields, not hydraulic field. Another objective is developing hydraulic circuit simulation model which analyzes the cause of several destabilizing elements related to quality of injection molded products. Injection molded product consists of a lot of hydraulic parts, and there are many nonlinear facts for dynamic behavior. So, we used 'SimulationX' which is specialized in hydraulic system for developing simulation model.

Keywords

References

  1. S. B. Cho, C. H. Park, B. G. Pyo and D. H. Choi, "Determination of Valve Gate Open Timing for Minimizing Injection Pressure of an Automotive Instrument Panel," Transactions of KSAE, Vol.20, No.4, pp.46-51, 2012. https://doi.org/10.7467/KSAE.2012.20.4.046
  2. D. J. Choi and H. S. Park, "Optimization of Multi-component Injection Molding Process Based on Core-back System," Transactions of KSAE, Vol.17, No.2, pp.67-74, 2009.
  3. J. S. Jang, "Development of Analysis Model for Characteristic Study of Fluid Power System in Injection Molding Machine," Journal of KFPS, Vol.8, No.4, pp.1-8, 2011.
  4. J. S. Jang, "Characteristics Analysis of the Fluid Power System for a Double-color Injection Molding Machine Development," Journal of KFPS, Vol.8, No.4, pp.24-31, 2011.
  5. S. C. Shin, Y. J. Park, J. Y. Kim and K. K. Lee, "Development of Simulation Model for Analysis Hydraulic Systems in Injection Molding Machine," Journal of KSS, Vol.11, No.4, pp.25-32, 2002.