DOI QR코드

DOI QR Code

Active mass driver control system for suppressing wind-induced vibration of the Canton Tower

  • Xu, Huai-Bing (School of Civil Engineering, Harbin Institute of Technology) ;
  • Zhang, Chun-Wei (School of Civil Engineering, Harbin Institute of Technology) ;
  • Li, Hui (School of Civil Engineering, Harbin Institute of Technology) ;
  • Tan, Ping (The State Key Laboratory of Seismic Reduction/Control & Structural Safety (Cultivation), Guangzhou University) ;
  • Ou, Jin-Ping (School of Civil Engineering, Harbin Institute of Technology) ;
  • Zhou, Fu-Lin (The State Key Laboratory of Seismic Reduction/Control & Structural Safety (Cultivation), Guangzhou University)
  • 투고 : 2012.08.08
  • 심사 : 2013.11.23
  • 발행 : 2014.02.25

초록

In order to suppress the wind-induced vibrations of the Canton Tower, a pair of active mass driver (AMD) systems has been installed on the top of the main structure. The structural principal directions in which the bending modes of the structure are uncoupled are proposed and verified based on the orthogonal projection approach. For the vibration control design in the principal X direction, the simplified model of the structure is developed based on the finite element model and modified according to the field measurements under wind excitations. The AMD system driven by permanent magnet synchronous linear motors are adopted. The dynamical models of the AMD subsystems are determined according to the open-loop test results by using nonlinear least square fitting method. The continuous variable gain feedback (VGF) control strategy is adopted to make the AMD system adaptive to the variation in the intensity of wind excitations. Finally, the field tests of free vibration control are carried out. The field test results of AMD control show that the damping ratio of the first vibration mode increases up to 11 times of the original value without control.

키워드

참고문헌

  1. Chen, H.P., Tee, K.F. and Ni, Y.Q. (2012), "Mode shape expansion with consideration of analytical modelling errors and modal measurement uncertainty", Smart Struct. Syst., 10(4-5), 485-499. https://doi.org/10.12989/sss.2012.10.4_5.485
  2. Chung, T.T., Cho, S., Yun, C.B. and Sohn, H. (2012), "Finite element model updating of Canton Tower using regularization technique", Smart Struct. Syst., 10(4-5), 459-470. https://doi.org/10.12989/sss.2012.10.4_5.459
  3. Fujita, T., Kamada, T., Masaki, N. and Suizu, Y. (1992), "Active mass damper using multistage rubber bearing and hydraulic actuator", Proceedings of the Earthquake Engineering 10th World Conference, Balkema, Rotterdam.
  4. Fujita, T. (2002), "Progress of applications of active vibration control for buildings in Japan", Prog. Struct. Eng. Mater., 4(4), 353-362. https://doi.org/10.1002/pse.127
  5. Hellinger, R. and Mnich, P. (2009), "Linear motor-powered transportation: history, present status, and future outlook", P. IEEE, 97(11), 1892-1900. https://doi.org/10.1109/JPROC.2009.2030249
  6. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. Jr. and Yao, T.P. (1997), "Structural control: past, present, and future", J. Eng. Mech. - ASCE, 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  7. Ikeda, Y., Sasaki, K., Sakamoto, M. and Kobori, T. (2001), "Active mass driver system as the first application of active structural control", Earthq. Eng. Struct. D., 30(11), 1575-1595. https://doi.org/10.1002/eqe.82
  8. Lu, X.L., Li, P.Z., Guo, X.Q., Shi, W.X. and Liu, J. (Early view: 2012), "Vibration control using ATMD and site measurements on the Shanghai World Financial Center Tower", Struct. Des. Tall Spec. (DOI: 10.1002/tal.1027).
  9. Nagashima, I., Maseki, R., Asarmi, Y., Hirai, J. and Abiru, H. (2001), "Performance of hybrid mass damper system applied to a 36-storey high-rise building", Earthq. Eng. Struct.D., 30(11), 1615-1637. https://doi.org/10.1002/eqe.84
  10. Nakamura, Y., Tanaka, K., Nakayama, M. and Fujita, T. (2001), "Hybrid mass dampers using two types of electric servomotors: AC servomotors and linear-induction servomotors", Earthq. Eng. Struct. D., 30(11), 1719-1743. https://doi.org/10.1002/eqe.89
  11. Ni, Y.Q., Wong, K.Y. and Xia, Y. (2011), "Health checks through landmark bridges to sky-high structures", Adv. Struct. Eng., 14(1), 103-119. https://doi.org/10.1260/1369-4332.14.1.103
  12. Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health Monit., 16(1), 73-98. https://doi.org/10.1002/stc.303
  13. Ou, J.P. (2003), Structural vibration control - active, semi-active and smart control, Science Press, Beijing, (in Chinese).
  14. Spencer, B.F. Jr. and Nagarajaiah, S. (2003), "Sate of the art of structural control", J. Struct. Eng. - ASCE, 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845)
  15. Yamamoto, M., Aizawa, S., Higashino, M. and Toyama, K. (2001), "Pratical applications of active mass dampers with hydraulic actuator", Earthq. Eng. Struct. D., 30(11), 1697-1717. https://doi.org/10.1002/eqe.88

피인용 문헌

  1. Considerations on the implementation and modeling of an active mass driver with electric torsional servomotor vol.58-59, 2015, https://doi.org/10.1016/j.ymssp.2014.12.010
  2. A novel tuned heave plate system for heave motion suppression and energy harvesting on semi-submersible platforms vol.59, pp.6, 2016, https://doi.org/10.1007/s11431-016-6055-9
  3. Smart tuned mass dampers: recent developments vol.13, pp.2, 2014, https://doi.org/10.12989/sss.2014.13.2.173
  4. Multi-model robust adaptive control of tall buildings vol.52, pp.13, 2017, https://doi.org/10.1007/s11012-017-0619-z
  5. Seismic control response of structures using an ATMD with fuzzy logic controller and PSO method vol.51, pp.4, 2014, https://doi.org/10.12989/sem.2014.51.4.547
  6. Numerical Investigation of a Tuned Heave Plate Energy-Harvesting System of a Semi-Submersible Platform vol.9, pp.12, 2016, https://doi.org/10.3390/en9020082
  7. Multi-objective optimal design of fuzzy controller for structural vibration control using Hedge-algebras approach 2018, https://doi.org/10.1007/s10462-017-9549-3
  8. Effect of Nonstructural Masses on Civil Structures by CUF-Based Finite Element Models pp.1550-2295, 2018, https://doi.org/10.1080/15502287.2018.1501118
  9. A Review on Adaptive Methods for Structural Control vol.10, pp.None, 2016, https://doi.org/10.2174/1874149501610010653
  10. Performance-based optimal design of tuned impact damper for seismically excited nonlinear building vol.160, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.01.042
  11. Velocity feedback for controlling vertical vibrations of pedestrian-bridge crossing. Practical guidelines vol.22, pp.1, 2014, https://doi.org/10.12989/sss.2018.22.1.095
  12. Swing Vibration Control of Suspended Structure Using Active Rotary Inertia Driver System: Parametric Analysis and Experimental Verification vol.9, pp.15, 2014, https://doi.org/10.3390/app9153144
  13. Experimental Investigation on Semi-Active Control of Base Isolation System Using Magnetorheological Dampers for Concrete Frame Structure vol.9, pp.18, 2014, https://doi.org/10.3390/app9183866
  14. Robustness of the Active Rotary Inertia Driver System for Structural Swing Vibration Control Subjected to Multi-Type Hazard Excitations vol.9, pp.20, 2014, https://doi.org/10.3390/app9204391
  15. Hysteretic Behavior of Composite Vertical Connection Structures used in Prefabricated Shear Wall Systems vol.20, pp.6, 2014, https://doi.org/10.1142/s0219455420400076
  16. Semi-Active Control for Benchmark Building Using Innovative TMD with MRE Isolators vol.20, pp.6, 2020, https://doi.org/10.1142/s021945542040009x
  17. Numerical and experimental research on actuator forces in toggled active vibration control system (Part I: Numerical) vol.25, pp.2, 2020, https://doi.org/10.12989/sss.2020.25.2.229
  18. Seismic response control of transmission tower-line system using SMA-based TMD vol.74, pp.1, 2014, https://doi.org/10.12989/sem.2020.74.1.129
  19. Vibration analysis of piezoelectric sandwich nanobeam with flexoelectricity based on nonlocal strain gradient theory vol.41, pp.6, 2014, https://doi.org/10.1007/s10483-020-2620-8
  20. Computer simulation for stability analysis of the viscoelastic annular plate with reinforced concrete face sheets vol.27, pp.4, 2014, https://doi.org/10.12989/cac.2021.27.4.369
  21. Free convection simulation of hybrid nanomaterial in permeable cavity with inclusion of magnetic force vol.335, pp.None, 2014, https://doi.org/10.1016/j.molliq.2021.116170
  22. Monitoring of wind effects on a wind-sensitive hybrid structure with single-layer cable-net curtain walls under Typhoon Muifa vol.44, pp.None, 2021, https://doi.org/10.1016/j.jobe.2021.102960
  23. Eddy-Current Tuned Mass Dampers for Mitigation of Wind-Induced Response of the Noor III Solar Tower: Design, Installation, and Validation vol.147, pp.12, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0003180
  24. Research on task-offloading decision mechanism in mobile edge computing-based Internet of Vehicle vol.2021, pp.1, 2014, https://doi.org/10.1186/s13638-021-01984-6
  25. Nonlinear Analyses of Porous Functionally Graded Sandwich Piezoelectric Nano-Energy Harvesters under Compressive Axial Loading vol.11, pp.24, 2014, https://doi.org/10.3390/app112411787
  26. Control performance of active tuned mass damper for mitigating wind-induced vibrations of a 600-m-tall skyscraper vol.45, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.103646