DOI QR코드

DOI QR Code

A frequency tracking semi-active algorithm for control of edgewise vibrations in wind turbine blades

  • Arrigan, John (Department of Civil, Structural and Environmental Engineering, Trinity College Dublin) ;
  • Huang, Chaojun (Department of Civil and Env. Eng. and Mech. Eng. and Mat. Sc., Rice University) ;
  • Staino, Andrea (Department of Civil, Structural and Environmental Engineering, Trinity College Dublin) ;
  • Basu, Biswajit (Department of Civil, Structural and Environmental Engineering, Trinity College Dublin) ;
  • Nagarajaiah, Satish (Department of Civil and Env. Eng. and Mech. Eng. and Mat. Sc., Rice University)
  • 투고 : 2012.02.10
  • 심사 : 2013.02.04
  • 발행 : 2014.02.25

초록

With the increased size and flexibility of the tower and blades, structural vibrations are becoming a limiting factor towards the design of even larger and more powerful wind turbines. Research into the use of vibration mitigation devices in the turbine tower has been carried out but the use of dampers in the blades has yet to be investigated in detail. Mitigating vibrations will increase the design life and hence economic viability of the turbine blades and allow for continual operation with decreased downtime. The aim of this paper is to investigate the effectiveness of Semi-Active Tuned Mass Dampers (STMDs) in reducing the edgewise vibrations in the turbine blades. A frequency tracking algorithm based on the Short Time Fourier Transform (STFT) technique is used to tune the damper. A theoretical model has been developed to capture the dynamic behaviour of the blades including the coupling with the tower to accurately model the dynamics of the entire turbine structure. The resulting model consists of time dependent equations of motion and negative damping terms due to the coupling present in the system. The performances of the STMDs based vibration controller have been tested under different loading and operating conditions. Numerical analysis has shown that variation in certain parameters of the system, along with the time varying nature of the system matrices has led to the need for STMDs to allow for real-time tuning to the resonant frequencies of the system.

키워드

참고문헌

  1. Ahlstrom, A. (2006), "Influence of wind turbine flexibility on loads and power production", Wind Energy, 9(3), 237-249. https://doi.org/10.1002/we.167
  2. Arrigan, J., Pakrashi, V., Basu, B. and Nagarajaiah, S. (2011), "Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers", Struct. Control Health Monit., 18(8), 840-851. https://doi.org/10.1002/stc.404
  3. Bechly, M.E. and Clausen, P.D. (1997), "Structural design of a composite wind turbine blade using finite element analysis", Comput. Struct., 63(3), 639-646. https://doi.org/10.1016/S0045-7949(96)00387-2
  4. Chang, C.C. (1999), "Mass dampers and their optimal designs for building vibration control", Eng. Struct., 21(5), 454 - 463. https://doi.org/10.1016/S0141-0296(97)00213-7
  5. Chaviaropoulos, P.K. (2001), "Flap/lead-lag aeroelastic stability of wind turbine blades", Wind Energy, 4(4), 183-200. https://doi.org/10.1002/we.55
  6. Chaviaropoulos, P.K., Nikolaou, I.G., Aggelis, K.A., Soerensen, N.N., Johansen, J., Hansen, M.O.L., Gaunaa, M., Hambraus, T., von Geyr, H.F., Hirsch, C., Shun, K., Voutsinas, S.G., Tzabiras, G., Perivolaris, Y. and Dyrmose, S.Z. (2003), "Viscous and aeroelastic effects on wind turbine blades. The VISCEL project. Part I: 3D Navier-Stokes rotor simulations", Wind Energy, 6(4),365-385. https://doi.org/10.1002/we.100
  7. Chaviaropoulos, P.K., Politis, E.S., Lekou, D.J., SArensen, N.N., Hansen, M.H., Bulder, B.H., Winkelaar, D., Lindenburg, C., Saravanos, D.A., Philippidis, T.P., Galiotis, C., Hansen, M.O.L. and Kossivas, T. (2006), "Enhancing the damping of wind turbine rotor blades, the DAMPBLADE project", Wind Energy, 9(1-2),163-177. https://doi.org/10.1002/we.183
  8. Cohen, L. (1995), Time-frequency analysis, Prentice-Hall, Inc., Upper Saddle River, NJ, USA.
  9. Hansen, M.H. (2003), "Improved modal dynamics of wind turbines to avoid stall-induced vibrations", Wind Energy, 6(2),179-195. https://doi.org/10.1002/we.79
  10. Hansen, M.H. (2007), "Aeroelastic instability problems for wind turbines", Wind Energy, 10(6), 551-577. https://doi.org/10.1002/we.242
  11. Hansen, M.O.L. (2008). Aerodynamics of wind turbines, Earthscan.
  12. Hijmissen, J. and van Horssen, W. (2007), "On aspects of damping for a vertical beam with a tuned mass damper at the top", Nonlinear Dynam., 50, 169-190. https://doi.org/10.1007/s11071-006-9150-9
  13. Jensen, F.M., Falzon, B.G., Ankersen, J. and Stang, H. (2006), "Structural testing and numerical simulation of a 34 m composite wind turbine blade", Compos. Struct., 76(1-2), 52 - 61. https://doi.org/10.1016/j.compstruct.2006.06.008
  14. Jonkman, J.M., Butterfield, S., Musial, W. and Scott, G. (2009), Definition of a 5-MW reference wind turbine for offshore system development, National Renewable Energy Laboratory, Technical report NREL/TP-500-38060, Golden, Colorado.
  15. Kaimal, J.C., Wyngaard, J.C., Izumi, Y. and $CotA{\copyright}$, O.R. (1972), "Spectral characteristics of surface-layer turbulence", Q. J. Roy. Meteor. Soc., 98(417), 563-589. https://doi.org/10.1002/qj.49709841707
  16. Kareem, A. and Kline, S. (1995), "Performance of multiple mass dampers under random loading", J. Struct. Eng. - ASCE, 121(2), 348-361. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(348)
  17. Lackner, M.A. and Rotea, M.A. (2011), "Passive structural control of offshore wind turbines", Wind Energy, 14(3), 373-388. https://doi.org/10.1002/we.426
  18. Li, H.N. and Ni, X.L. (2007), "Optimization of non-uniformly distributed multiple tuned mass damper", J. Sound Vib., 308(1-2), 80 - 97. https://doi.org/10.1016/j.jsv.2007.07.014
  19. Murtagh, P.J., Basu, B. and Broderick, B.M. (2005), "Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading ", Eng. Struct., 27(8), 1209 - 1219. https://doi.org/10.1016/j.engstruct.2005.03.004
  20. Murtagh, P.J., Ghosh, A., Basu, B. and Broderick, B.M. (2008), "Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence", Wind Energy, 11(4), 305-317. https://doi.org/10.1002/we.249
  21. Nagarajaiah, S. (2009), "Adaptive passive, semiactive, smart tuned mass dampers: identification and control using empirical mode decomposition‟, Hilbert transform, and short-term Fourier transform", Struct. Control Health Monit., 16(7-8), 800-841. https://doi.org/10.1002/stc.349
  22. Nagarajaiah, S. and Basu, B. (2009), "Output only modal identification and structural damage detection using time frequency & wavelet techniques", Earthq. Eng. Eng. Vib., 8, 583-605. https://doi.org/10.1007/s11803-009-9120-6
  23. Nagarajaiah, S. and Sonmez, E. (2007), "Structures with semiactive variable stiffness single/multiple tuned mass dampers", J. Struct. Eng. - ASCE, 133(1), 67-77. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(67)
  24. Nagarajaiah, S. and Varadarajan, N. (2005), "Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD", Eng. Struct., 27(3), 431-441. https://doi.org/10.1016/j.engstruct.2004.10.015
  25. Pinkaew, T. and Fujino, Y. (2001), "Effectiveness of semi-active tuned mass dampers under harmonic excitation", Eng. Struct., 23(7), 850 -856. https://doi.org/10.1016/S0141-0296(00)00091-2
  26. Ronold, K.O. and Larsen, G.C. (2000), "Reliability-based design of wind-turbine rotor blades against failure in ultimate loading", Eng. Struct., 22(6), 565-574. https://doi.org/10.1016/S0141-0296(99)00014-0
  27. Ronold, K.O., Wedel-Heinen, J. and Christensen, C.J. (1999), "Reliability-based fatigue design of wind-turbine rotor blades", Eng. Struct., 21(12), 1101-1114. https://doi.org/10.1016/S0141-0296(98)00048-0
  28. Shokrieh, M.M. and Rafiee, R. (2006), "Simulation of fatigue failure in a full composite wind turbine blade", Compos. Struct., 74(3), 332 - 342. https://doi.org/10.1016/j.compstruct.2005.04.027
  29. Simiu, E. and Scanlan, R.H. (1996), Wind effects on structures: fundamentals and applications to design. Wiley-Interscience publication. John Wiley.
  30. Staino, A. and Basu, B. (2011), "Robust constrained model predictive control for flapwise vibrations mitigation in wind turbines", (Eds. Roeck, G. D., Degrande, G., Lombaert, G. and Muller, G.), Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011.
  31. Staino, A., Basu, B. and Nielsen, S.R.K. (2012), "Actuator control of edgewise vibrations in wind turbine blades", J. Sound Vib., 331(6), 1233- 1256. https://doi.org/10.1016/j.jsv.2011.11.003
  32. Thomsen, K., Petersen, J.T., Nim, E., Oye, S. and Petersen, B. (2000), "A method for determination of damping for edgewise blade vibrations", Wind Energy, 3(4), 233-246. 201 https://doi.org/10.1002/we.42

피인용 문헌

  1. Smart tuned mass dampers: recent developments vol.13, pp.2, 2014, https://doi.org/10.12989/sss.2014.13.2.173
  2. Semi-active control of vibrations of spar type floating offshore wind turbines vol.18, pp.4, 2016, https://doi.org/10.12989/sss.2016.18.4.683
  3. Semi-active control of seismic response of a building using MR fluid-based tuned mass damper vol.16, pp.5, 2015, https://doi.org/10.12989/sss.2015.16.5.807
  4. Reliability analysis of active tendon-controlled wind turbines by a computationally efficient wavelet-based probability density evolution method 2017, https://doi.org/10.1002/stc.2078
  5. Emerging trends in vibration control of wind turbines: a focus on a dual control strategy vol.373, pp.2035, 2014, https://doi.org/10.1098/rsta.2014.0069
  6. A monitoring system for wind turbines subjected to combined seismic and turbulent aerodynamic loads vol.4, pp.2, 2014, https://doi.org/10.12989/smm.2017.4.2.175
  7. Energy harvesting techniques for health monitoring and indicators for control of a damaged pipe structure vol.21, pp.3, 2018, https://doi.org/10.12989/sss.2018.21.3.287
  8. Decentralized control of vibrations in wind turbines using multiple active tuned mass dampers with stroke constraint vol.10, pp.12, 2018, https://doi.org/10.1177/1687814018816756
  9. Vibration control of horizontal axis offshore wind turbine blade using SMA stiffener vol.28, pp.9, 2019, https://doi.org/10.1088/1361-665x/ab1174
  10. Assessment of porosity influence on dynamic characteristics of smart heterogeneous magneto-electro-elastic plates vol.72, pp.1, 2019, https://doi.org/10.12989/sem.2019.72.1.113
  11. Pitch Control of Three Bladed Large Wind Energy Converters-A Review vol.14, pp.23, 2021, https://doi.org/10.3390/en14238083