DOI QR코드

DOI QR Code

DEVELOPMENT OF GREEN'S FUNCTION APPROACH CONSIDERING TEMPERATURE-DEPENDENT MATERIAL PROPERTIES AND ITS APPLICATION

  • 투고 : 2013.07.15
  • 심사 : 2013.08.12
  • 발행 : 2014.02.25

초록

About 40% of reactors in the world are being operated beyond design life or are approaching the end of their life cycle. During long-term operation, various degradation mechanisms occur. Fatigue caused by alternating operational stresses in terms of temperature or pressure change is an important damage mechanism in continued operation of nuclear power plants. To monitor the fatigue damage of components, Fatigue Monitoring System (FMS) has been installed. Most FMSs have used Green's Function Approach (GFA) to calculate the thermal stresses rapidly. However, if temperature-dependent material properties are used in a detailed FEM, there is a maximum peak stress discrepancy between a conventional GFA and a detailed FEM because constant material properties are used in a conventional method. Therefore, if a conventional method is used in the fatigue evaluation, thermal stresses for various operating cycles may be calculated incorrectly and it may lead to an unreliable estimation. So, in this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using an artificial neural network and weight factor. To verify the proposed method, thermal stresses by the new method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed.

키워드

참고문헌

  1. IAEA. (2013, June 30). Power Reactor Information System (PRIS). Retrieved June 30, 2013 from http://www.iaea.org/PRIS/home.aspx
  2. P.C. Riccardella, A.F. Deardorff, S.S. Tang and H.L. Gustin, "FATIGUEPRO On-Line Fatigue Monitoring System: Demonstration at the Quad Cities BWR," NP-6170-M, Electric Power Research Institute (1989)
  3. F. Arthur and P.E. Deardorff, "Use of FatiguePro Fatigue Monitoring System for Evaluation of Local Plant Instrument Data," TR-107534, Electric Power Research Institute (1996)
  4. C. Carney and T. Gilman, "Stress-Based Fatigue monitoring Methodology for Fatigue Monitoring of Class 1 Nuclear Components in a Reactor Water Environment," 1022876, Electric Power Research Institute (2011)
  5. A.Y. Kuo, S.S. Tang, and P.C. Riccardella, "An on-line fatigue monitoring system for power plants:part I-direct calculation of transient peak stress through transfer matrices and Green's functions," ASME PVP, Vol. 112, pp. 25-32 (1986)
  6. N.K. Mukhopadhyay, B.K. Dutta, H.S. Kushwaha, S.C. Mahajan and A. Kakodkar, "On line fatigue life monitoring methodology for power plant components," Int. J. Pres. Ves. & Piping 60, pp. 297-306 (1994) https://doi.org/10.1016/0308-0161(94)90129-5
  7. K. Sakai, K. Hojo, A. Kato and R. Umehara, "On-line fatigue-monitoring system for nuclear power plant," Nucl. Eng. Des., Vol. 153, pp. 19-25 (1994) https://doi.org/10.1016/0029-5493(94)90017-5
  8. N.K. Mukhopadhyay, B.K. Dutta and H.S. Kushwaha, "Online fatigue-creep monitoring system for high-temperature components of power plants," Int. J. Fatigue, Vol. 23, pp. 549-560 (2001) https://doi.org/10.1016/S0142-1123(01)00009-3
  9. S.B. Choi, Y.S. Chang, J.B. Choi, Y.J. Kim, M.J. Jhung and Y.H. Choi, "Fatigue life assessment of reactor coolant system components by using transfer functions of integrated FE model," Nucl. Eng. Technol., Vol. 42, No. 5, pp. 590-599 (2010) https://doi.org/10.5516/NET.2010.42.5.590
  10. G.H. Koo, J.J. Kwon and W.J. Kim, "Green's function method with consideration of temperature de-pendent material properties for fatigue monitoring of nuclear power plants," Int. J. Pres. Ves. & Piping, Vol. 86, pp. 187-195 (2009) https://doi.org/10.1016/j.ijpvp.2008.09.006
  11. H. Zhang, Y. Xiong, C. Nie, D. Xie and K. Sun, "A methodology for online fatigue monitoring with con-sideration of temperature-dependent material properties using artificial parameter method," Journal of Pressure Vessel Technology, Vol. 134, pp. 011201.1-011201.6 (2012)
  12. H.O. Ko, M.J. Jhung and J.B. Choi, "Modified Green's function approach using temperature-dependent material properties and stress properties for thermal fatigue analysis," Applied Mechanics and Materials, Vol. 252, pp. 32-35 (2013)
  13. A. Krogh, "What are artificial neural networks?," Nat. Biotechnol., Vol. 26, No. 2, pp. 195-197, (2008) https://doi.org/10.1038/nbt1386
  14. M.H. Beale, M.T. Hagan and H.B. Demuth, "Matlab Neural network toolbox user's guide (R2012a)," Mathworks Inc Natick Mass Usa (2012)
  15. Artificial neural network (2013, June 30). Wikipedia. Retrieved June 30, 2013 from http://en.wikipedia.org/wiki/Artificial_neural_network
  16. ASME boiler & pressure vessel code, Section II, part D, ASME (2010)