대 변형 감지용 스트레인게이지 개발

Development of a Strain Gauge for Sensing Large Strain

  • 이영태 (안동대학교 바이오전자공학과) ;
  • 조승우 (안동대학교 바이오전자공학과)
  • Lee, Young Tae (Department of Bioelectronics Engineering, Andong National University) ;
  • Cho, Seung Woo (Department of Bioelectronics Engineering, Andong National University)
  • 투고 : 2014.11.28
  • 심사 : 2014.12.22
  • 발행 : 2014.12.31

초록

In this paper, a carbon strain gauge for large strain was developed. The carbon strain gauge was fabricated by forming PCB and antenna pattern using Cu/Ni/Au film and carbon resistor pattern using screen printing process on plastic film substrate. It was possible to develop low-cost disposable strain gauge since the carbon paste was cheap and the fabrication process was simple. The wireless communication type carbon strain gauge was fabricated by integrating signal processing circuit, antenna and power all together on the same substrate as a strain gauge. The wireless communication type carbon strain gauge has a merit of being available immediately at the spot without any particular system.

키워드

참고문헌

  1. M. E. Tuttle and H.F. Brinson, "Resistance Fail Strain Gage Technology as Applied to Composite Materials", NASA Contractor Report, 3872, pp. 1-41 (1985).
  2. Nanshu Lu, Chi Lu, Shixuan Yang and John Rogers, "High Sensitive Skin-Mountable Strain Gauge Based Entirely on Elastomers", Advanced Function Materials, DOI: 10.1002/adfm.201200498 (2012).
  3. XinYu Lin, Martin Hwangi, XiuJun Li, Michacl O'Brien and George M. Whitesides, "Paper-based Piezoresistive MEMS Sensors", Lab Chip, 11, pp. 2187-2196 (2011).
  4. Federico Gasco, Paolo Feraboli, Jeff Braun, Patrick Stickler and Luciano DeOto, "Wireless Strain Measurement for Structural Testing and Health Monitoring", Composites: Part A, 42, pp. 1263-11274 (2011). https://doi.org/10.1016/j.compositesa.2011.05.008
  5. Uday Tata, Hung Cao, Vaibhav Langdge, Cuong M. Nguyen and J. C. Chiao, "Wireless Strain Sensor Based on Amorphous Carbon for Human-Motion Detection", BioWireless 2013, Austin, TX, Jan. 20-23 (2013).
  6. Jun Young Lee, Jae Kyung Ban, Seung Woo Cho, Chae Beom Yeo and Young Tae Lee, "Development of a Soil Moisture Monitoring System using Plastic Film Type Moisture Sensor", The Korean Sensor Society Conference 2013, 24, No.1, pp. 125 (2013).