Earthquakes and Structures

  • 제6권1호
  • /
  • Pages.111-125
  • /
  • 2014
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Probabilistic analysis of seismically isolated elevated liquid storage tank using multi-phase friction bearing

  • Moeindarbari, Hesamaldin (Department of Civil and Environmental Engineering, AmirKabir University of Technology (Polytechnic)) ;
  • Malekzadeh, Masoud (Department of Civil, Environmental and Construction Engineering, University of Central Florida) ;
  • Taghikhany, Touraj (Department of Civil and Environmental Engineering, AmirKabir University of Technology (Polytechnic))
  • 투고 : 2013.04.30
  • 심사 : 2013.10.23
  • 발행 : 2014.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Multiple level performance of seismically isolated elevated storage tank isolated with multi-phase friction pendulum bearing is investigated under totally 60 records developed for multiple level seismic hazard analysis (SLE, DBE and MCE). Mathematical formulations involving complex time history analysis have been proposed for analysis of typical storage tank by multi-phase friction pendulum bearing. Multi-phase friction pendulum bearing represent a new generation of adaptive friction isolation system to control super-structure demand in different hazard levels. This isolator incorporates four concave surfaces and three independent pendulum mechanisms. Pendulum stages can be set to address specific response criteria for moderate, severe and very severe events. The advantages of a Triple Pendulum Bearing for seismic isolation of elevated storage tanks are explored. To study seismic performance of isolated elevated storage tank with multi-phase friction pendulum, analytical simulations were performed with different friction coefficients, pendulum radii and slider displacement capacities.

키워드

참고문헌

  1. Bleiman, D. and Kim, S. (1993), "Base isolation of high volume elevated water tanks", Proceeding Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control, ATC 17-1, Applied Technology Council, Redwood City, California.
  2. Christovasilis, I.P. and Whittaker, A.S. (2008), "Seismic analysis of conventional and isolated LNG tanks using mechanical analogs", Earthq. Spectra, 24, 599-616. https://doi.org/10.1193/1.2945293
  3. Fenz, D.M. and Constantinou, M.C. (2006), "Behaviour of the double concave friction pendulum bearing", Earthq. Engng. Struct. Dyn., 35(11), 1403-1422. https://doi.org/10.1002/eqe.589
  4. Fenz, D.M. and Constantinou, M.C. (2008a), "Spherical sliding isolation bearings with adaptive behavior: theory", Earthq. Eng. Struct. Dyn., 37 (2), 163-183. https://doi.org/10.1002/eqe.751
  5. Fenz, D.M. and Constantinou, M.C. (2008b), "Spherical sliding isolation bearings with adaptive behavior: experimental verification", Earthq. Eng. Struct. Dyn., 37(2), 185-205. https://doi.org/10.1002/eqe.750
  6. Fenz, D.M. and Constantinou, M.C. (2008c), "Modeling triple friction pendulum bearings for response history analysis", Earthq. Spectra, 24(4), 1011-1028. https://doi.org/10.1193/1.2982531
  7. Haroun, M.A. (1983), "Vibration studies and test of liquid storage tanks", Earthq. Eng. Struct. Dyn., 11,179-206. https://doi.org/10.1002/eqe.4290110204
  8. Jadhav, M.B. and Jangid, R.S. (2006), "Response of base-isolated liquid storage tanks to near fault motions", Struct. Eng. Mech., 23, 615-634. https://doi.org/10.12989/sem.2006.23.6.615
  9. Kelly, J.M. (1999), "The role of damping in seismic isolation", Earthq. Eng. Struct. Dyn., 28(1), 3-20. https://doi.org/10.1002/(SICI)1096-9845(199901)28:1<3::AID-EQE801>3.0.CO;2-D
  10. Knoy, C.E. (1995), "Performance of elevated tanks during recent California seismic events", AWWA Annual Conference & Exhibition.
  11. Makris, N. and Vassiliou, M.F. (2011), "The existence of 'complete similarities' in the response of seismic isolated structures subjected to pulse-like ground motions and their implications in analysis", Earthq. Eng. Struct. Dyn., 40(10), 1103-1121. https://doi.org/10.1002/eqe.1072
  12. Malekzadeh, M. and Taghikhany, T. (2010), "Adaptive behavior of double concave friction pendulum bearing and its advantages over friction pendulum systems", Scientia Iranica, 17(2), 81-88.
  13. Malekzadeh, M. and Taghikhany, T. (2012), "Multi-stage performance of seismically isolated bridge using triple pendulum bearings", Adv. Struct. Eng., 15(7), 1181 -1196. https://doi.org/10.1260/1369-4332.15.7.1181
  14. Malhotra, P.K. (1997), "New method for seismic isolation of liquid-storage tanks", Earthq. Eng. Struct. Dyn., 26, 839-847. https://doi.org/10.1002/(SICI)1096-9845(199708)26:8<839::AID-EQE679>3.0.CO;2-Y
  15. Minowa, C. (1980), "Dynamic analysis for rectangular water tanks", Recent Adv. Lifeline Earthquake Engineering Japan, 135-142.
  16. Morgan, T.A. (2007), "The use of innovative base isolation systems to achieve complex seismic performance objectives", Ph.D. Dissertation, Department of Civil and Environmental Engineering, University of California, Berkeley.
  17. Morgan, T.A. and Mahin, S.A. (2007), "Enhancing the performance capabilities of seismically isolated buildings using multi-stage friction pendulum sliding bearings", Proc. World Forum on Smart Mat. And Smart Struct. Tech., Chongquing and Nanjing, China.
  18. Shampine, L.F. and Reichelt, M.W. (1997), "The MATLAB ODE suite", SIAM J. Sci. Comput., 18, 1-22. https://doi.org/10.1137/S1064827594276424
  19. Shenton, III H.W. and Hampton, F.P. (1999), "Seismic response of isolated elevated water tanks", J. Struct. Eng. - ASCE, 125(9), 965-976. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(965)
  20. Shrimali, M.K. and Jangid, R.S. (2003), "Earthquake response of isolated elevated liquid storage steel tanks", J. Constr. Steel Res., 59(10), 1267-1288. https://doi.org/10.1016/S0143-974X(03)00066-X
  21. Somerville, P.D., Anderson, J., Sun, S.P. and Smith, N. (1998), "Generation of ground motion time histories for performance-based seismic engineering", Proc. 6th National Earthq. Eng. Conf., Seattle, Washington.
  22. Sonia, D.P., Mistryb, B.B. and Panchala, V.R. (2011), "Double variable frequency pendulum isolator for seismic isolation of liquid storage tanks", Nucl. Eng. Des., 241, 700-713. https://doi.org/10.1016/j.nucengdes.2011.01.012
  23. Steinbrugge, K.V. and Rodrigo, F.A. (1963), "The Chilean earthquakes of May 1960: a structural engineering viewpoint", Bull. Seismol. Am., 53, 225-307.
  24. Wang, Y., Teng, M. and Chung, K. (2001), "Seismic isolation of rigid cylindrical tanks using friction pendulum bearings", Earthq. Eng. Struct. Dyn., 30,1083-1099. https://doi.org/10.1002/eqe.56

피인용 문헌

  1. Seismic optimum design of triple friction pendulum bearing subjected to near-fault pulse-like ground motions vol.50, pp.4, 2014, https://doi.org/10.1007/s00158-014-1079-x
  2. Novel procedure for reliability-based cost optimization of seismically isolated structures for the protection of critical equipment: A case study using single curved surface sliders vol.25, pp.1, 2018, https://doi.org/10.1002/stc.2054
  3. A comprehensive collapse fragility assessment of moment resisting steel frames considering various sources of uncertainties vol.43, pp.2, 2016, https://doi.org/10.1139/cjce-2013-0491
  4. Seismic Vulnerability Assessment of Liquid Storage Tanks Isolated by Sliding-Based Systems vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/5304245
  5. Analytical assessment of elevated tank natural period considering soil effects vol.5, pp.3, 2014, https://doi.org/10.12989/csm.2016.5.3.223
  6. New coefficients to find natural period of elevated tanks considering fluid-structure-soil interaction effects vol.12, pp.6, 2014, https://doi.org/10.12989/gae.2017.12.6.949
  7. Seismic response analysis of an unanchored vertical vaulted-type tank vol.13, pp.1, 2017, https://doi.org/10.12989/eas.2017.13.1.067
  8. Seismic reliability assessment of base-isolated structures using artificial neural network: operation failure of sensitive equipment vol.14, pp.5, 2014, https://doi.org/10.12989/eas.2018.14.5.425
  9. Vibration mode decomposition response analysis of large floating roof tank isolation considering swing effect vol.15, pp.4, 2014, https://doi.org/10.12989/eas.2018.15.4.411
  10. Design theory and method of LNG isolation vol.16, pp.1, 2019, https://doi.org/10.12989/eas.2019.16.1.001
  11. Numerical investigation on behaviour of cylindrical steel tanks during mining tremors and moderate earthquakes vol.18, pp.1, 2020, https://doi.org/10.12989/eas.2020.18.1.097
  12. Shock absorption of concrete liquid storage tank with different kinds of isolation measures vol.18, pp.4, 2014, https://doi.org/10.12989/eas.2020.18.4.467
  13. Study on Sloshing Effect of Vertical Storage Tank With Displacement Seismic Excitation vol.143, pp.2, 2021, https://doi.org/10.1115/1.4048138
  14. Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing vol.189, pp.None, 2022, https://doi.org/10.1016/j.jcsr.2021.107107