Journal of the Korea Institute of Military Science and Technology (한국군사과학기술학회지)

The Korea Institute of Military Science and Technology (한국군사과학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of High-Voltage EME and Design for EMC in Hybrid Electric Vehicle

전기추진 차량의 고전압 전자파 환경(EME) 분석과 전자파 적합성(EMC) 설계

  • Lim, Jong-Kwang (The 5th Research and Development Institute, Agency for Defense Development) ;
  • Lee, Hyunju (The 5th Research and Development Institute, Agency for Defense Development)
  • 임종광 (국방과학연구소 제5기술연구본부) ;
  • 이현주 (국방과학연구소 제5기술연구본부)
  • Received : 2013.11.22
  • Accepted : 2014.09.05
  • Published : 2014.10.05
Download PDF
⟨ Previous Next ⟩

Abstract

There were overwhelming high-frequency electromagnetic noises in 200kW-class hybrid electric vehicle(HEV) although EMC control strategy had been applied to cope with the electromagnetic noises during the development of HEV. This paper investigates the characteristics of the conducted and radiated emission noises, the source and path of noises, and the effects of EMI on the electronics. Finally the design concept of noise control is proposed.

Keywords

References

  1. Committee on Assesment of Combat Hybrid Power Systems, "Combat Hybrid Power System Component Technologies : Technical Challenges and Research Priorities," ISBN : 0-309-54230-8, 2002.
  2. Matti Linjjonen, Ari Hentunen, and Jussi Suomela, "Validation of Quasi-Static Series Hybrid Electric Vehicle Simulation Model," IEEE Vehicle Power and Propulsion Conference(VPPC), 2010.
  3. Ari Hentunen, Jussi Suomela, Matti Linjjonen, and Panu Sainio, "Hardware-in-the-Loop Verification Environment for Heavy-Duty Hybrid Electric Vehicles," IEEE Vehicle Power and Propulsion Conference(VPPC), 2010.
  4. Carsten Greissner, Stephan Frank, Daniel Kong, and Stephan Otto, "Hybrid System for a Military 8${\time}$8 Wheeled Vehicles as an Extension to a 120kW High-Voltage Energy System," Jenoptik, 2014.
  5. Hirofumi Akgi and Takayuki Shimizu, "Attenuation of Conducted EMI Emissions from a Inverter-Driven Motor," IEEE Transactions on Power Electronics, Vol. 23, No. 1, pp. 282-290, January 2008. https://doi.org/10.1109/TPEL.2007.911878
  6. Krishna Mainali, and Ramesh Oruganti, "Conducted EMI Mitigation Techniques for Switch-Mode Power Converters: A Survey," IEEE Transactions on Power Electronics, Vol. 25, No. 9, pp. 2344-2356, 2010. https://doi.org/10.1109/TPEL.2010.2047734
  7. Mattias Hedenskog, Emanuel Hallgren, "Modeling and Validation of the EMI Performance of an Electric Drive System by Device Level Characterization", Chlmers University of Technologies, 2011.
  8. Rami Kahoul, Yacine Azzouz, Blaise Ravelo, and Belahcene Mazari, "New Behavioral Modeling of EMI for DC Motors Applied to EMC Characterization," IEEE Transactions on Industrial Electronics, Vol. 60, No. 12, pp. 5842-5496, December 2013.
  9. Marcelo Lebo Heldwein, Luca Dalessandro, and Johann W. Kolar, "The Three-Phase Common-Mode Inductor : Modeling and Design Issues," IEEE Transactions on Industrial Electronics, Vol. 58, No. 8, pp. 3264-3274, August 2011. https://doi.org/10.1109/TIE.2010.2089949
  10. Thomas Weber, "EMC Filters in High Voltage Traction Drive Systems," IEEE Electromagnetic Compatibility, pp. 1-6, 2008.
  11. Dong Jiang, Fei Wang, and Jing Xue, "PWM Impact on CM Noise and AC CM Choke for Variable-Speed Motor Drives," IEEE Transactions on Industrial Applications, Vol. 49, No. 2, pp. 963-972, March/April 2013. https://doi.org/10.1109/TIA.2013.2243394
  12. Stefan Klein, "EMC Filter for DC/DC Switching Controller Optimized," Application Note, Wurth Electronik, pp. 1-6, 2012.
  13. Nidhal Y. Nasser, "Practical Approach in Designing Conducted EMI Filter to Mitigate Common Mode and Differential Mode Noises in SMPS," Journal of Engineering and Development, Vol. 16, No. 1, pp. 164-183, March 2012.
  14. Annetle Muetze, and Charles R. Sullivan, "Simplified Design of Common-Mode Chokes for Reduction of Motor Ground Currents in Inverter Drives," IEEE Transactions on Industry Applications, Vol. 47, No. 6, pp. 2570-2577, November/December, 2011. https://doi.org/10.1109/TIA.2011.2170101
  15. MIL-STD-464C, Electromagnetic Environmental Effects Requirements for Systems, 2010.
  16. Jongkwang Lim, Kyogun Chang, Sangchul Chung, and Byunglae Rho, "EMC Control Strategy for the Series Hybrid Electric Vehicle," In Proceedings of International Conference on Materials and Reliability 2011, Busan, Korea, pp. ICMR2011_A312, November 20-22, 2011.
  17. MIL-STD-461, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystem and Equipment, 2007.
  18. Elya B. Joffe, EMC Design Considerations for Aerospace Systems, K.T.M. Project Engineering ltd.