과제정보
연구 과제 주관 기관 : Guangdong Transportation Ministry
참고문헌
- Alexanderson, J. (1971). The influence of the properties of cement and aggregates on the consistency of concrete. Proceedings RILEM Seminar, 23(2), 12-22.
- Beshr, H., Almusallam, A. A., & Maslehuddin, M. (2003). Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Construction and Building Materials, 17(2), 97-103. https://doi.org/10.1016/S0950-0618(02)00097-1
- Beste, U., & Jacobson, S. (2003). Micro scale hardness distribution of rock types related to rock drill wear. Wear, 254(5), 1147-1154. https://doi.org/10.1016/S0043-1648(03)00327-2
- Counto, U. J. (1964). The effect of elastic modulus of the aggregate on the elastic modulus, creep and creep recovery of concrete. Magazine of Concrete Research, 16(2), 129. https://doi.org/10.1680/macr.1964.16.48.129
- Hirsch, T. J. (1962). Modulus of elasticity of concrete affected by elastic module of cement paste matrix and aggregate. ACI Materials Journal, 59(3), 427-451.
- Mehta, P. K. (1999). Concrete technology for sustainable development. Concrete International, 21(11), 47-53.
- Mehta, P. K., & Monteiro, P. J. M. (1993). Concrete: Microstructure, properties, and materials. NewYork,NY: McGraw-Hill.
- Mindess, S., Young, J. F., & David, D. (2003). Concrete (2nd ed.). New Jersey, NJ: Pearson Education Inc.
- Mizuguchi, H. (1998). A review of environmentally friendly concrete. Concrete International, 36(1), 9-12.
- Nadeau, J. C. (2003). A multiscale model for effective module of concrete incorporating ITZ water-cement ratio gradients, aggregate size distributions, and entrapped voids. Cement and Concrete Research, 33(1), 103-113. https://doi.org/10.1016/S0008-8846(02)00931-6
- Neville, F. M. (1981). Properties of concrete. London, UK: Pitman publishing limited.
- Nilsen, A. U.,&Monteiro, P. J. M. (1993). Concrete:Athree phase material. Cement and Concrete Research, 23(2), 147-151. https://doi.org/10.1016/0008-8846(93)90145-Y
- Ozturan, T., & Cecen, C. (1997). Effect of coarse aggregate type on mechanical properties of concretes with different strengths. Cement and Concrete Research, 27(2), 165-170. https://doi.org/10.1016/S0008-8846(97)00006-9
- Ping, X., & Beaudoin, J. J. (1992). Effects of transition zone microstructure on bond strength of aggregate portland cement paste interfaces.CementandConcreteResearch,22(1),23-26.
- Van Oss, H. G., & Padovani, A. C. (2003). Cement manufacture and the environment, Part II: environmental challenges and opportunities. Journal of Industrial Ecology, 7(1), 93-126.
- Shen, W., Dong, R., Li, J., et al. (2010a). A study on the coarse aggregate interlocking concrete. Construction and building material, 24(11), 2312-2316. https://doi.org/10.1016/j.conbuildmat.2010.04.023
- Shen W, Cai Z, Zhou M. High strength coarse aggregate interlocking concrete: preparation and properties, 8th International symposium on Utilization of High-Strength and High Performance Concrete (fib), 2008, Tokyo, Japan, 188-192.
- Shen, W., Zhang, T., Zhou, M., et al. (2010b). Investigation on the scattering-filling coarse aggregate self-consolidating concrete. Materials and Structures, 43(10), 1343-1350. https://doi.org/10.1617/s11527-010-9585-9
- Stock, A. F., Hannant, D. J., & Williams, R. I. T. (1979). The effect of aggregate concentration upon the strength and modulus of elasticity of concrete. Magazine of Concrete Research, 31(2), 225-234. https://doi.org/10.1680/macr.1979.31.109.225
피인용 문헌
- Experimental Evaluation of the Influence of Early Disturbance on the Performance of Basalt Fiber Concrete vol.2020, pp.None, 2014, https://doi.org/10.1155/2020/8853442
- Experimental study of axial compression of reinforced concrete columns made by environment‐friendly post‐filling coarse aggregate process vol.22, pp.3, 2014, https://doi.org/10.1002/suco.202000271