참고문헌
- T. Shiono, K. Setsune, O. Yamazaki, and K. Wasa, "Rectangular-apertured micro-Fresnel lens arrays fabricated by electron-beam lithography," Appl. Opt. 26, 587-591 (1987). https://doi.org/10.1364/AO.26.000587
- F. B. McCormick, F. A. P. Tooley, T. J. Cloonan, J. M. Sasian, H. S. Hinton, K. O. Mersereau, and A. Y. Feldblum, "Optical interconnections using microlens arrays," Opt. Quant. Electron. 24, S465-S477 (1992). https://doi.org/10.1007/BF00619512
- H. J. Tiziani, R. Achi, R. N. Kramer, and L. Wiegers, "Theoretical analysis of confocal microscopy with microlenses," Appl. Opt. 35, 120-125 (1996). https://doi.org/10.1364/AO.35.000120
- E. Gu, H. W. Choi, C. Liu, C. Griffin, J. M. Girkin, I. M. Watson, M. D. Dawson, G. McConnell, and A. M. Gurney, "Reflection/transmission confocal microscopy characterization of single-crystal diamond microlens arrays," Appl. Phys. Lett. 84, 2754-2756 (2004). https://doi.org/10.1063/1.1695101
- R. H. Anderson, "Close-up imaging of documents and displays with lens arrays," Appl. Opt. 18, 477-484 (1979). https://doi.org/10.1364/AO.18.000477
- S. Jung, S.-W. Min, J.-H. Park, and B. Lee, "Study of three-dimensional display system based on computer-generated integral photography," J. Opt. Soc. Korea 5, 117-122 (2001). https://doi.org/10.3807/JOSK.2001.5.3.117
- D.-H. Shin and E.-S. Kim, "Computational integral imaging reconstruction of 3D object using a depth conversion technique," J. Opt. Soc. Korea 12, 131-135 (2008). https://doi.org/10.3807/JOSK.2008.12.3.131
- N. Davies, M. McCormick, and M. Brewin, "Design and analysis of an image transfer system using microlens arrays," Opt. Eng. 33, 3624-3633 (1994). https://doi.org/10.1117/12.181580
- H. Arimoto and B. Javidi, "Integral three-dimensional imaging with digital reconstruction," Opt. Lett. 26, 157-159 (2001). https://doi.org/10.1364/OL.26.000157
- M. Martinez-Corral, B. Javidi, R. Martinez-Cuenca, and G. Saavedra, "Integral imaging with improved depth of field by use of amplitude-modulated microlens arrays," Appl. Opt. 43, 5806-5813 (2004). https://doi.org/10.1364/AO.43.005806
- J.-S. Jang and B. Javidi, "Improved viewing resolution of three-dimensional integral imaging by use of nonstationary micro-optics," Opt. Lett. 27, 324-326 (2002). https://doi.org/10.1364/OL.27.000324
- J.-S. Jang and B. Javidi, "Large depth-of-focus time-multiplexed three-dimensional integral imaging by use of lenslets with nonuniform focal lengths and aperture sizes," Opt. Lett. 28, 1924-1926 (2003). https://doi.org/10.1364/OL.28.001924
- J.-S. Jang and B. Javidi, "Improvement of viewing angle in integral imaging by use of moving lenslet arrays with low fill factor," Appl. Opt. 42, 1996-2002 (2003). https://doi.org/10.1364/AO.42.001996
- Y. Ishii, S. Koike, Y. Arai, and Y. Ando, "Ink-jet fabrication of polymer microlens for optical-I/O chip packaging," Jpn. J. Appl. Phys. 39, 1490-1493 (2000). https://doi.org/10.1143/JJAP.39.1490
- T. Fujita, H. Nishihara, and J. Koyama, "Fabrication of micro lenses using electron-beam lithography," Opt. Lett. 6, 613-615 (1981). https://doi.org/10.1364/OL.6.000613
- M. Kufner and S. Kufner, "Fabrication of monolithic integrated fiber-lens connector arrays by deep proton irradiation," Microsystem Technologies 2, 114-118 (1996). https://doi.org/10.1007/s005420050026
- M. Severi and P. Mottier, "Etching selectivity control during resist pattern transfer into silica for the fabrication of microlenses with reduced spherical aberration," Opt. Eng. 38, 146-150 (1999). https://doi.org/10.1117/1.602069
- Z. D. Popovic, R. A. Sprague, and G. A. N. Connell, "Technique for monolithic fabrication of microlens arrays," Appl. Opt. 27, 1281-1284 (1998).
- D. Daly, R. F. Stevens, M. C. Hutley, and N. Davies, "The manufacture of microlenses by melting photoresist," Meas. Sci. Technol. 1, 759-766 (1990). https://doi.org/10.1088/0957-0233/1/8/016
- S. Haselbeck, H. Schreiber, J. Schwider, and N. Streibl, "Microlenses fabricated by melting a photoresist on a base layer," Opt. Eng. 32, 1322-1324 (1993). https://doi.org/10.1117/12.135845
- A. Schilling, R. Merz, C. Ossmann, and H. P. Herzig, "Surface profiles of reflow microlenses under the influence of surface tension and gravity," Opt. Eng. 39, 2171-2176 (2000). https://doi.org/10.1117/1.1304845
- C.-P. Lin, H. Yang, and C.-K. Chao, "Hexagonal microlens array modeling and fabrication using a thermal reflow process," J. Micromech. Microeng. 13, 775-781 (2003). https://doi.org/10.1088/0960-1317/13/5/333
- H. Yang, C.-K. Chao, M.-K. Wei, and C.-P. Lin, "High fill-factor microlens array mold insert fabrication using a thermal reflow process," J. Micromech. Microeng. 14, 1197-1204 (2004). https://doi.org/10.1088/0960-1317/14/8/012
피인용 문헌
- Multi-focused microlens array optimization and light field imaging study based on Monte Carlo method vol.25, pp.7, 2017, https://doi.org/10.1364/OE.25.008274
- Organic-inorganic-hybrid-polymer microlens arrays with tailored optical characteristics and multi-focal properties vol.23, pp.19, 2015, https://doi.org/10.1364/OE.23.025365
- Color-Matching Liquid Crystal Display using a Lenticular Lens Array and RGB Light Sources vol.18, pp.4, 2014, https://doi.org/10.3807/JOSK.2014.18.4.345
- Rapid fabrication of curved microlens array using the 3D printing mold vol.156, 2018, https://doi.org/10.1016/j.ijleo.2017.11.197
- Fabrication, characterization, and applications of microlenses vol.54, pp.24, 2015, https://doi.org/10.1364/AO.54.007366
- Design and fabrication of a multi-focusing artificial compound eyes with negative meniscus substrate vol.27, pp.4, 2017, https://doi.org/10.1088/1361-6439/aa5f88
- Fabrication of high fill-factor aspheric microlens array by dose-modulated lithography and low temperature thermal reflow pp.1432-1858, 2018, https://doi.org/10.1007/s00542-018-4226-2
- Fabrication of Microlens Array and Its Application: A Review vol.31, pp.1, 2018, https://doi.org/10.1186/s10033-018-0204-y