한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)

  • 제15권1호
  • /
  • Pages.488-494
  • /
  • 2014
  • /
  • 1975-4701(pISSN)
  • /
  • 2288-4688(eISSN)
한국산학기술학회 (The Korea Academia-Industrial cooperation Society)
권호 표지
DOI QR코드

DOI QR Code

마찰진자형 면진받침의 설계 및 해석절차 보완에 관한 연구

A Study on Complement of the Design and Analysis Procedures of Friction Pendulum System

  • 김현욱 (한국수력원자력 중앙연구원) ;
  • 주광호 (한국수력원자력 중앙연구원) ;
  • 노상훈 (한국수력원자력 중앙연구원) ;
  • 송종걸 (강원대학교 토목공학과)
  • 투고 : 2013.12.18
  • 심사 : 2014.01.09
  • 발행 : 2014.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

마찰진자형 면진받침은 마찰면의 곡률반경과 중력에 의해 생성되는 고유 복원력과 마찰에 의한 감쇠력을 갖는다는 장점이 있지만, 마찰계수의 속도, 상재압 및 온도 등에 대한 의존성으로 거동에 대한 예측이 쉽지 않다. 본 연구에서는 각 기준에서 제시된 마찰진자형 받침의 설계 및 해석절차를 분석하여 추가적인 검토가 필요한 사항들에 대해 평가해 보았으며, 추가로 동일한 동특성을 갖는 납-고무 면진받침 시스템을 이용한 해석결과와 마찰진자형 면진받침 시스템의 해석결과를 비교하여 마찰진자형 면진받침이 갖는 상대적인 거동 특성을 비교 분석해 보았다.

Although friction pendulum system has various advantages it is difficult to estimate the behavior because of velocity, bearing pressure, and temperature dependent characteristics of coefficient of friction. This research focuses on evaluating the conservatism of each method used and the effects of bearing pressure on the behavior of the system by conducting comprehensive examination on design and analytic procedure of friction pendulum system, as is proposed in standard, code and literature. In addition, this study provides comparative analysis on general behavior characteristics of friction pendulum system by comparing the result with that of the analysis on lead rubber bearing which possesses the same dynamic properties.

키워드

참고문헌

  1. Jinkoo Kim, Seismic Isolation and Control of Building Structure, pp. 85-89, Architecture Institute of Korea, v.48 n.8, Aug, 2004
  2. Federal Emergency Management Agency, NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings(FEMA 274) Ch. 9. Seismic Isolation and Energy Dissipation, 9-1-9-60, Oct, 1997
  3. Farzad Naeim, James M. Kelly, Design of Seismic Isolated Structures, pp. 1-117, John Wiley & Sons, 1999. DOI: http://dx.doi.org/10.1002/9780470172742
  4. Ronald L. Mayes, Fazard Naeim, The Seismic Design Handbook 2nd Edition Ch.14 Design of Structures with Seismic Isolation, pp. 725-755, Kluwer Academic Publishers, 2001
  5. Daekon Kim, Woobyum Kim, Yongpyo Suh, Deasik Moon, Jongyup Kim, "Seismic Performance Evaluation for MCR of Nuclear Power Plant Isolated by FPS", Proceedings of EESK Conference, Earthquake Engineering Society of Korea, 453-460, 2003
  6. Kyungjin Lee, Kapsun Kim, Yongpyo Suh, "Dynamic Property Evaluation of Friction Pendulum Isolation Bearing", Proceedings of EESK Conference, Earthquake Engineering Society of Korea, 465-472, 2003
  7. Constantinou, M. C., Whittaker, A. S., Kalpakidis, Y., Fenz, D. M., Warn, G. P., Performance of Seismic Isolation Hardware under Service and Seismic Loading, MCEER-07-0012, Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York, Buffalo, NY., 2007
  8. American Association of State Highway and Transportation Officials, Guide Specification for Seismic Isolation Design, AASHTO, Washington, D.C., 2010
  9. American Society of Civil Engineers, ASCE 7-10; Minimum Design Loads for Buildings and other Structures, ASCE, Reston, 2010
  10. American Society of Civil Engineers, ASCE 4-98; Seismic Analysis of Safety-Related Nuclear Structures and Commentary, ASCE, 1999 DOI: http://dx.doi.org/10.1061/9780784404331
  11. Hyunuk Kim, Kwangho Joo, Sanghoon Noh, Changgyun Jung, "Behavior Analysis of a Seismically Isolated NPP Structure by Varying Seismic Input Generation Method and Strong Ground Motion Duration" Journal of the Earthquake Engineering Society of Korea, 29-36, v.17(4), July, 2013 DOI: http://dx.doi.org/10.5000/EESK.2013.17.4.187
  12. US NRC, Regulatory Guide 1.60 - Design Response Spectra for Seismic Design of Nuclear Power Plants, 1973
  13. Hyunuk Kim, "Evaluation of the Applicability of Existing Design Formula for Seismic Isolation to Nuclear Power Plants", Journal of the Earthquake Engineering Society of Korea, v.16(6), Dec, 2012 DOI: http://dx.doi.org/10.5000/EESK.2012.16.6.029