DOI QR코드

DOI QR Code

Distributed optical fiber sensors for integrated monitoring of railway infrastructures

  • Minardo, Aldo (Department of Industrial and Information Engineering, Second University of Naples) ;
  • Coscetta, Agnese (Department of Industrial and Information Engineering, Second University of Naples) ;
  • Porcaro, Giuseppe (Tecnomatica SaS, Corso del Mezzogiorno III trav.) ;
  • Giannetta, Daniele (Ferrovie del Gargano, Direzione di Esercizio) ;
  • Bernini, Romeo (Istituto per il Rilevamento Elettromagnetico dell'Ambiente - Consiglio Nazionale delle Ricerche) ;
  • Zeni, Luigi (Department of Industrial and Information Engineering, Second University of Naples)
  • 투고 : 2014.02.07
  • 심사 : 2014.05.30
  • 발행 : 2014.06.25

초록

We describe the application of a distributed optical fiber sensor based on stimulated Brillouin scattering, as an integrated system for safety monitoring of railway infrastructures. The strain distribution was measured statically and dynamically along 60 meters of rail track, as well as along a 3-m stone arch bridge. We show that, gluing an optical fiber along the rail track, traffic monitoring can be performed in order to identify the train passage over the instrumented sector and determine its running conditions. Furthermore, dynamic and static strain measurements on a rail bridge are reported, aimed to detect potential structural defects. The results indicate that distributed sensing technology represents a valuable tool in railway traffic and safety monitoring.

키워드

과제정보

연구 과제 주관 기관 : European Community's Seventh Framework Program

참고문헌

  1. Bao, X. and Chen, L. (2011), "Recent progress in Brillouin scattering based fiber sensors", Sensors, 11, 4152-4187. https://doi.org/10.3390/s110404152
  2. Bernini, R., Minardo, A. and Zeni, L. (2009), "Dynamic strain measurement in optical fibers by stimulated Brillouin scattering", Opt. Lett., 34(17), 2613-2615. https://doi.org/10.1364/OL.34.002613
  3. Duan, N., Peng, F., Rao, Y.J., Du, J. and Lin, Y. (2014), "Field test for real-time position and speed monitoring of trains using phase-sensitive optical time domain reflectometry ($\Phi$-OTDR)", Proceedings of the 23rd International Conference on Optical Fibre Sensors, (Eds., Jose Miguel Lopez-Higuera, Julian Jones, Manuel Lopez-Amo, Jose Luis Santos), Proc. of SPIE, 9157, 91577A, doi: 10.1117/12.2059188.
  4. Filograno, M.L., Corredera Guillen, P., Rodriguez-Barrios, A., Martin-Lopez, S., Rodriguez-Plaza, M., Andres-Alguacil, A., Gonzalez-Herraez, M. (2012), "Real-time monitoring of railway traffic using fiber bragg grating sensors", IEEE Sens. J., 12, 85-92. https://doi.org/10.1109/JSEN.2011.2135848
  5. Kerrouche, A., Boyle, W.J.O., Sun, T. and Grattan, K.T.V. (2009), "Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications", Sens. Actuat. A - Phys., 151(2), 107-121. https://doi.org/10.1016/j.sna.2009.01.021
  6. Ko, M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  7. Lee, C.M., Rose, J.L. and Cho, Y. (2009), "A guided wave approach to defect detection under shelling in rail", NDT & E Int., 42(3), 174-180. https://doi.org/10.1016/j.ndteint.2008.09.013
  8. Minardo, A., Bernini, R., Amato, L. and Zeni, L. (2012), "Bridge monitoring using Brillouin fiber-optic sensors", IEEE Sens. J., 12(1), 145-150. https://doi.org/10.1109/JSEN.2011.2141985
  9. Minardo, A., Porcaro, G., Giannetta, D., Bernini, R. and Zeni, L. (2013), "Real-time monitoring of railway traffic using slope-assisted Brillouin distributed sensors", Appl. Optics., 52(16), 3770-3776. https://doi.org/10.1364/AO.52.003770
  10. Nielsen, J.C.O. and Johansson, A. (2000), "Out-of-round railway wheels-a literature survey", Proceedings of the Institution of Mechanical Engineers, Part F: J. Rail and Rapid Transit, 214(2), 79-91.
  11. Nikles, M., Thevenaz, L. and Robert, P.A. (1997), "Brillouin gain spectrum characterization in single-mode optical fibers", IEEE J. Lightw. Technol., 15(10), 1842-1851. https://doi.org/10.1109/50.633570
  12. Peled, Y., Motil, A., Yaron, L. and Tur, M. (2011), "Slope-assisted fast distributed sensing in optical fibers with arbitrary Brillouin profile", Opt. Express., 19(21), 19845-19854. https://doi.org/10.1364/OE.19.019845
  13. Peled, Y., Motil, A., Kressel, I. and Tur, M. (2013), "Monitoring the propagation of mechanical waves using an optical fiber distributed and dynamic strain sensor based on BOTDA", Opt. Express., 21(9), 10697-10705. https://doi.org/10.1364/OE.21.010697
  14. Rizzo, P., Cammarata, M., Bartoli, I., Lanza di Scalea, F., Salamone, S., Coccia, S. and Philips R. (2010), "Ultrasonic guided waves-based monitoring of rail head: laboratory and field tests", Adv. Civil Eng., 210, http://dx.doi.org/10.1155/2010/291293.
  15. Valis, T., Hogg, D., Measures, R.M. (1992), "Thermal apparent-strain sensitivity of surface-adhered, fiber-optic strain gauges", Appl. Optics., 31(34), 7178-7179. https://doi.org/10.1364/AO.31.007178
  16. Wilcox P., Pavlakovic B., Evans M., Vine K., Cawley P., Lowe M., Alleyne D. (2003), "Long range inspection of rail using guided waves", Rev. Prog. Quant. Nondestruct. Eval., 22, 236-243.

피인용 문헌

  1. Monitoring of Strain and Temperature in an Open Pit Using Brillouin Distributed Optical Fiber Sensors vol.20, pp.7, 2014, https://doi.org/10.3390/s20071924
  2. Design and application of real-time monitoring system for service status of continuously welded turnout on the high-speed railway bridge vol.13, pp.7, 2021, https://doi.org/10.1080/19439962.2019.1673858
  3. Brillouin Frequency Shift Sensing Technology Used in Railway Strain and Temperature Measurement vol.11, pp.15, 2014, https://doi.org/10.3390/app11157101