DOI QR코드

DOI QR Code

A near and far-field monitoring technique for damage detection in concrete structures

  • Providakis, Costas (Applied Mechanics Lab, School of Architectural Engineering, Technical University of Crete) ;
  • Stefanaki, K. (Applied Mechanics Lab, School of Architectural Engineering, Technical University of Crete) ;
  • Voutetaki, M. (Applied Mechanics Lab, School of Architectural Engineering, Technical University of Crete) ;
  • Tsompanakis, J. (School of Environmental Engineering Technical University of Crete) ;
  • Stavroulaki, M. (Applied Mechanics Lab, School of Architectural Engineering, Technical University of Crete)
  • 투고 : 2014.04.12
  • 심사 : 2014.05.08
  • 발행 : 2014.06.25

초록

Real-time near and far-field monitoring of concrete structural components gives enough information on the time and condition at which damage occurs, thereby facilitating damage detection while in the same time evaluate the cause of the damage. This paper experimentally investigates an integrated monitoring technique for near and far-field damage detection in concrete structures based on simultaneous use of electromechanical admittance technique in combination with guided wave propagation. The proposed sensing system does not measure the electromechanical admittance itself but detect time variations in output voltages of the response signal obtained across the electrodes of piezoelectric transducers bonded on surfaces of concrete structures. The damage identification is based on the spectral estimation MUSIC algorithm. Experimental results show the efficiency and performance of the proposed measuring technique.

키워드

참고문헌

  1. Agilent Technologies (2000), Application Note 346-4.
  2. An, Y.K. and Sohn, H. (2011), "Integrated impedance and guided wave based damage detection under temperature variation", Proceedings of the SPIE 7981, Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, doi: 10.1117/12.880753.
  3. An, Y.K., Kim, M.K. and Sohn, H. (2012), "Airplane hot spot monitoring using integrated impedance and guided wave measurements", Struct. Control Health Monit., 19(7), 592-604. https://doi.org/10.1002/stc.1493
  4. Annamdas V.G.M. and Soh C.K. (2010), "Application of electromechanical impedance technique for engineering structures: review and future issues", J. Intell. Mat. Syst. Str., 21(1), 41-59. https://doi.org/10.1177/1045389X09352816
  5. Brownjohn, J.M.W., de Stefano, A., Xu, Y. L., Wenzel, H. and Aktan, A.E. (2011), "Vibration-based monitoring of civil infrastructure: challenges and successes", J. Civil Struct. Health Monit., 1(3-4), 79-95. https://doi.org/10.1007/s13349-011-0009-5
  6. Cruz, P.J.S., Topczewski, L., Fernandes, F.M., Trela, C. and Lourenco, P.B. (2010), "Application of radar techniques to the verification of design plans and the detection of defects in concrete bridges", Struct. Infrastruct. E., 6(4), 395-407. https://doi.org/10.1080/15732470701778506
  7. Durager, C., Heinzelmann, A. and Riederer, D. (2012), "A wireless sensor system for structural health monitoring with guided ultrasonic waves and piezoelectric transducers", Struct. Infrastruct. E., doi:10.1080/15732479.2012.671833.
  8. Georgiutiu, V., Zagrai, A. and Bao, J.J. (2004), "Damage identification in aging aircraft structures with piezoelectric wafer active sensors", J. Intell. Mat. Syst. Str., 15(9-10), 673-687. https://doi.org/10.1177/1045389X04038051
  9. Jiang, X. and Adeli, H. (2007), "Pseudospectra, MUSIC, and dynamic wavelet neural network for damage detection of highrise buildings", Int. J. Numer. Meth. Eng., 71(5), 606-629. https://doi.org/10.1002/nme.1964
  10. Fan,W. and Qiao, P Z. (2011), "Vibration-based damage identification methods: a review and comparative Study", Struct. Health Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  11. Kumar, R.P., Oshima, T., Mikami, S., Miyamori, Y. and Yamazaki, T. (2012), "Damage identification in a lightly reinforced concrete beam based on changes in the power spectral density", Struct. Infrastruct. E., 8(8), 715-727. https://doi.org/10.1080/15732471003730674
  12. Labview (2012), National Instruments, USA, www.ni.com
  13. Matlab (2010), Signal Processing toolbox, The Mathworks Inc., U.S.A., www.mathworks.com.
  14. Park, S., Ahmad, S., Yun, C.B. and Roh, Y. (2006), "Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques", Exper. Mech., 46(5), 609-618. https://doi.org/10.1007/s11340-006-8734-0
  15. Park, H.J., Sohn, H., Yun, C.B., Chung, J. and Lee, M.M. (2012), "Wireless guided wave and impedance measurement using laser and piezoelectric transducers", Smart Mater. Struct., 21(3), 035029, doi:10.1088/0964-1726/21/3/035029.
  16. PI Ceramic GmbH (2012), www.piceramic.com, Germany.
  17. Providakis, C., Stefanaki, K., Voutetaki, M., Tsompanakis, J. and Stavroulaki, (2012), "Damage detection in concrete structures using a simultaneously activated multi-mode PZT active sensing system : numerical modeling", Struct. Infrastruct. E., doi: 10.108/15732479.2013.831908.
  18. Raghavan, A. and Cesnik, C.E.S. (2007), "Review of guided-wave structural health monitoring", Shock Vib. Dig., 39(2), 91-114. https://doi.org/10.1177/0583102406075428
  19. Wait, J.R., Park, G. and Farrar, C.R. (2005), "Integrated structural health monittoning assessment using piezoelectric active sensors", Shock Vib., 12(6), 389-405. https://doi.org/10.1155/2005/250912
  20. Worden, K. (2001), "Rayleigh and Lamb waves - Basic principles", Strain, 37(4), 167-172. https://doi.org/10.1111/j.1475-1305.2001.tb01254.x
  21. Yun, C.B., Lee, J.J. and Koo, K.Y. (2011), "Smart structure technologies for civil infrastructures in Korea: recent research and applications", Struct. Infrastruct. E., 7(9), 673-688. https://doi.org/10.1080/15732470902720109
  22. Zagrai, A., Doyle, D. and Gigineishvili, V. (2010), "Piezoelectric wafer active sensor structural health monitoring of space structures", J. Intell. Mat. Syst. Str., 21(9), 921-940. https://doi.org/10.1177/1045389X10369850
  23. Zhu, X. and Rizzo, P. (2012), "A unified approach for the structural health monitoring of waveguides", Struct. Health Monit., 11(6), 629-642. https://doi.org/10.1177/1475921712438569