DOI QR코드

DOI QR Code

Lamb wave-based damage imaging method for damage detection of rectangular composite plates

  • Qiao, Pizhong (Department of Civil and Environmental Engineering, Washington State University) ;
  • Fan, Wei (Department of Civil and Environmental Engineering, Washington State University)
  • 투고 : 2014.04.21
  • 심사 : 2014.10.24
  • 발행 : 2014.12.25

초록

A relatively low frequency Lamb wave-based damage identification method called damage imaging method for rectangular composite plate is presented. A damage index (DI) is generated from the delay matrix of the Lamb wave response signals, and it is used to indicate the location and approximate area of the damage. The viability of this method is demonstrated by analyzing the numerical and experimental Lamb wave response signals from rectangular composite plates. The technique only requires the response signals from the plate after damage, and it is capable of performing near real time damage identification. This study sheds some light on the application of Lamb wave-based damage detection algorithm for plate-type structures by using the relatively low frequency (e.g., in the neighborhood of 100 kHz, more suitable for the best capability of the existing fiber optic sensor interrogator system with the sampling frequency of 500 kHz) Lamb wave response and a reference-free damage detection technique.

키워드

과제정보

연구 과제 주관 기관 : Alaska University Transportation Center (AUTC)

참고문헌

  1. Deutsch, W.A.K., Cheng, A. and Achenbach, J.D. (1997), "Self-focusing of Rayleigh waves and lamb waves with a linear phased array", Res. Nondestruct. Eval., 9(2), 81-95. https://doi.org/10.1080/09349849709409609
  2. Fink, M. (1992), "Time-reversal of ultrasonic fields .1. basic principles", IEEE T. Ultrason. Ferr., 39(5), 555-566. https://doi.org/10.1109/58.156174
  3. Giurgiutiu, V., Bao, J. and Zhao, W. (2003), "Piezoelectric wafer active sensor embedded ultrasonics in beams and plates", Exp. Mech., 43(4), 428-449. https://doi.org/10.1007/BF02411348
  4. Giurgiutiu, V., Zagrai, A. and Bao, J.J. (2002), "Embedded active sensors for in-situ structural health monitoring, of thin-wall structures", J. Pressure Vessel Technol. T. - ASME, 124(3), 293-302. https://doi.org/10.1115/1.1484117
  5. Hay, T.R., Royer, R.L. Gao, H.D., Zhao, X. and Rose, J.L. (2006), "A comparison of embedded sensor Lamb wave ultrasonic tomography approaches for material loss detection", Smart Mater. Struct., 15(4), 946-951. https://doi.org/10.1088/0964-1726/15/4/007
  6. Jansen, D.P. and Hutchins, D.A. (1992), "Immersion tomography using Rayleigh and Lamb waves", Ultrasonics, 30(4), 245-254. https://doi.org/10.1016/0041-624X(92)90084-Y
  7. Kundu, T. (2004), Ultrasonic Nondestructive Evaluation: Engineering and Biological Material Characterization, Boca Raton: CRC Press LLC.
  8. Leonard, K.R., Malyarenko, E.V. and Hinders, M.K. (2002), "Ultrasonic Lamb wave tomography", Inverse Probl., 18(6), 1795-1808. https://doi.org/10.1088/0266-5611/18/6/322
  9. Lemistre, M. and Balageas, D. (2001), "Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing", Smart Mater. Struct., 10(3), 504-511. https://doi.org/10.1088/0964-1726/10/3/312
  10. Lestari, W. and Qiao, PZ. (2005), "Application of wave propagation analysis for damage identification in composite laminated beams", J. Compos. Mater., 39(22), 1967-1984. https://doi.org/10.1177/0021998305052021
  11. Lin, X. and Yuan, F.G. (2001), "Damage detection of a plate using migration technique", J. Intel. Mat. Syst. Str., 12(7), 469-482. https://doi.org/10.1177/10453890122145276
  12. Muralidharan, A., Balasubramaniam, K. and Krishnamurthy, C.V. (2008), "A migration based reconstruction algorithm for the imaging of defects in a plate using a compact array", Smart Struct. Syst., 4(4), 449-464. https://doi.org/10.12989/sss.2008.4.4.449
  13. Park, H.W., Sohn, H., Law, K.H. and Farrar , C.R. (2007), "Time reversal active sensing for health monitoring of a composite plate", J. Sound Vib., 302(1-2), 50-66. https://doi.org/10.1016/j.jsv.2006.10.044
  14. Sekhar, B.V.S., Balasubramaniam, K. and Krishnamurthy, C.V. (2006), "Structural health monitoring of fiber-reinforced composite plates for low-velocity impact damage using ultrasonic lamb wave tomography", Struct. Health Monit., 5(3), 243-253. https://doi.org/10.1177/1475921706067739
  15. Sohn, H., Park, H.W., Law, K.H. and Farrar , C.R. (2007), "Damage detection in composite plates by using an enhanced time reversal method", J. Aerospace Eng., 20(3), 141-151. https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141)
  16. Tan, K.S., Guo, N., Wong, B.S. and Tui, C.G. (1995), "Experimental evaluation of delaminations in composite plates by the use of Lamb waves", Compos. Sci. Technol., 53(1), 77-84. https://doi.org/10.1016/0266-3538(94)00076-X
  17. Wang, C.H., Rose, J.T. and Chang, F.K. (2004), "A synthetic time-reversal imaging method for structural health monitoring", Smart Mater. Struct., 13(2), 415-423. https://doi.org/10.1088/0964-1726/13/2/020
  18. Wang, C.H., Rose, J.T. and Chang, F.K. (2004), "A synthetic time-reversal imaging method for structural health monitoring", Smart Mater. Struct., 13(2), 415-423. https://doi.org/10.1088/0964-1726/13/2/020
  19. Wilcox, P.D. (2003), "Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures", IEEE T. Ultrason. Ferr., 50(6), 699-709. https://doi.org/10.1109/TUFFC.2003.1209557
  20. Wu, F., Thomas, J.L. and Fink, M. (1992), "Time-reversal of ultrasonic fields .2. experimental results", IEEE T. Ultrason. Ferr., 39(5), 567-578. https://doi.org/10.1109/58.156175
  21. Yang, M.J. and Qiao, P.Z. (2005), "Modeling and experimental detection of damage in various materials using the pulse-echo method and piezoelectric sensors/actuators", Smart Mater. Struct., 14(6), 1083-1100. https://doi.org/10.1088/0964-1726/14/6/001
  22. Yu, L. and Giurgiutiu, V. (2008), "In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection", Ultrasonics, 48(2), 117-134. https://doi.org/10.1016/j.ultras.2007.10.008