DOI QR코드

DOI QR Code

Reliability-based condition assessment of a deteriorated concrete bridge

  • Ghodoosi, Farzad (Department of Building, Civil & Environmental Engineering, Concordia University) ;
  • Bagchi, Ashutosh (Department of Building, Civil & Environmental Engineering, Concordia University) ;
  • Zayed, Tarek (Department of Building, Civil & Environmental Engineering, Concordia University) ;
  • Zaki, Adel R. (SNC-Lavalin Inc.)
  • 투고 : 2014.09.24
  • 심사 : 2014.12.09
  • 발행 : 2014.12.25

초록

In the existing bridge management systems, assessment of the structural behavior is based on the results of visual inspections in which corresponding condition states are assigned to individual elements. In this process, limited attention is given to the correlation between bridge elements from structural perspective. Also, the uncertainty of parameters which affect the structural capacity is ignored. A system reliability-based assessment model is potentially an appropriate replacement for the existing procedures. The aim of this research is to evaluate the system reliability of existing conventional Steel-Reinforced bridge decks over time. The developed method utilizes the reliability theory and evaluates the structural safety for such bridges based on their failure mechanisms. System reliability analysis has been applied to simply-supported concrete bridge superstructures designed according to the Canadian Highway Bridge Design Code (CHBDC-S6) and the deterioration pattern is achieved based on the reliability estimates. Finally, the bridge condition index of an old existing bridge in Montreal has been estimated using the developed deterioration pattern. The results obtained from the developed reliability-based deterioration model and from the evaluation done by bridge engineers have been found to be in accordance.

키워드

과제정보

연구 과제 주관 기관 : Natural Sciences and Engineering Council of Canada (NSERC)

참고문헌

  1. AASHTO. (2004), LRFD bridge design specifications, Washington, DC.
  2. Adhikari, R.S., Bagchi, A. and Moselhi, O. (2013), "Automated condition assessment of concrete bridges with digital imaging", Smart Struct. Syst., 13(6), 901-925.
  3. Canadian Standards Association (CSA), (2006), Canadian highway bridge design code (CHBDC), CAN/CSA-S6-06, Toronto.
  4. Cusson, D., Lounis, Z. and Daigle, L. (2011), "Durability monitoring for improved service life predictions of concrete bridge decks in corrosive environments", Comput.- Aided Civil Infrastruct. Eng., 26(7), 524-541. https://doi.org/10.1111/j.1467-8667.2010.00710.x
  5. Czarnecki, A.A. and Nowak, A.S. (2007), "Reliability-based evaluation of steel girder bridges", Procidings of the Institution of Civil Engineers, Bridge Engineering, 160(1), 9-15.
  6. Ghodoosi, F., Bagchi, A. and Zayed, T. (2014a), "System-level deterioration model for reinforced concrete bridge decks", ASCE J. Bridge Eng., 10.1061/(ASCE)BE.1943-5592.0000670 , 04014081.
  7. Ghodoosi, F., Bagchi, A. and Zayed, T. (2014b), "Reliability-based condition assessment of an externally restrained bridge deck system considering uncertainties in key eesign parameters", J. Perform. Constr. Fac., 10.1061/(ASCE)CF.1943-5509.0000699 , 04014189.
  8. Huffman, S., Bagchi, A., Mufti, A., Neal, K., Sargent, D. and Rivera, E. (2006), "GFRP seismic strengthening and structural health monitoring of Portage Creek Bridge concrete columns", Arabian J. Sci. Technol., 31(1), 25-42.
  9. Ikpong, A. and Bagchi, A. (2014), "New method for climate change resilience rating of highway bridges", J. Cold Reg. Eng., 10.1061/(ASCE)CR.1943-5495.0000079.
  10. Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1), 1-45.
  11. Liu, Y. and Weyers, R.E. (1998), "Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures", J. ACI Mater., 95(6), 675-681.
  12. McDaniel, M., Celaya, M. and Nazarian, M. (2010), "Concrete bridge deck quality mapping with seismic methods: case study in Texas", J. Transport. Res. Record, 2202, 53-60. https://doi.org/10.3141/2202-07
  13. Miyamoto, A., Kawamura, K. and Nakamura, H. (2001), "Development of a bridge management system for existing bridges", J. Adv. Eng.Software, 32(10-11), 821-833. https://doi.org/10.1016/S0965-9978(01)00034-5
  14. Nowak, A. S. and Collins, K.R. (2000), Reliability of Structures, McGraw-Hill.
  15. Oracle Crystal Ball 11.1.1 [Computer software]. Denver, Oracle.
  16. SAP2000 15 [Computer software]. Berkeley, CA, Computers and Structures.
  17. Stewart, M.G. and Rosowsky, D.V. (1998), "Structural safety and serviceability of concrete bridges subject to corrosion", J. Infrastruct. Syst., 4(4), 146-155. https://doi.org/10.1061/(ASCE)1076-0342(1998)4:4(146)
  18. Weyers, R.E. (1998), "Service life model for concrete structures in chloride laden environments", J. ACI Mater., 95(4), 445-453.
  19. Vu, K., Stewart, M.G. and Mullard, J. (2005), "Corrosion-induced cracking experimental data and predictive models", ACI Struct. J., 102(5), 719-726
  20. Yi, T.H., Li, H.N. and Sun, H.M. (2013), "Multi-stage structural damage diagnosis method based on "energy-damage" theory", Smart Struct. Syst., 12(3-4), 345-361. https://doi.org/10.12989/sss.2013.12.3_4.345
  21. Zaki, A.R. (2000), Structural condition of the Monk Bridge in Montreal, Private Communication.

피인용 문헌

  1. Prediction of the remaining service life of existing concrete bridges in infrastructural networks based on carbonation and chloride ingress vol.21, pp.3, 2014, https://doi.org/10.12989/sss.2018.21.3.305