DOI QR코드

DOI QR Code

Operational Method of Superconducting Fault Current Limiter with Reduction Function of Asymmetric Fault Current

비대칭 고장전류 저감 기능을 갖는 초전도 한류기 동작 방안

  • 김창환 (영남대학교 전기공학과) ;
  • 서훈철 (연암공업대학) ;
  • 김규호 (국립한경대학교 전기공학과) ;
  • 김철환 (성균관대 정보통신공학부, 전력IT인력양성센터) ;
  • 이상봉 (영남대학교 전기공학과)
  • Received : 2014.07.21
  • Accepted : 2014.09.11
  • Published : 2014.10.31

Abstract

When fault currents contain decaying DC offset, the peak value of the fault current in the first cycle of the fault period is higher than the fault current during the steady-state period. To reduce the asymmetric fault current, this paper proposes an operation scheme using the series connection of two hybrid type Superconducting Fault Current Limiters (SFCLs) : an auxiliary SFCL and a main SFCL. The proposed method calculates the fault angle by comparing the zero-crossing time with fault detection time. According to the fault angle calculated, an auxiliary SFCL operates to reduce an asymmetric fault current during half a cycle after fault occurrence. After this process, the fault current is limited by a main SFCL. To confirm the usefulness of the proposed method, case studies using Electro-Magnetic Transients Program (EMTP)/Alternative Transient Program (ATP) Draw are perfomed.

Keywords

References

  1. S. B. Rhee, C. H. Kim, K. H. Kim, J. C. Kim, O. B. Hyun, "An Analysis of Superconducting Fault Current Limiter Operation According to Asymmetry Fault Current", Trans KIEE, vol. 58, No. 3, pp.450-454, 2009.
  2. M. G. On, M. H. Kim, J. S. Kim, I. K. You, S. H. Lim, J. C. Kim, "A Study on the Application of SFCL on 22.9 kV Bus Tie for Parallel Operation of Power Main Transformers in a Power Distribution System", Trans. KIEE, vol. 60, No. 1, pp.20-25, 2011. https://doi.org/10.5370/KIEE.2011.60.1.020
  3. B. W. Lee and S. B. Rhee, "Test requirements and performance evaluation for both resistive and inductive superconducting fault current limiters for 22.9 kV Electric Distribution Network in Korea", IEEE Trans. Appl. Superconduct., vol. 20, No. 3, pp.1114-1117, Jun. 2010. https://doi.org/10.1109/TASC.2010.2040256
  4. S. H. Lim, "Operational Characteristics of Flux-Lock Type SFCL With Series Connection of Two Coils", IEEE Trans. Appl. Superconduct., vol.17, No.2, pp.1895-1898, June 2007. https://doi.org/10.1109/TASC.2007.899869
  5. B. W. Lee, K. B. Park, J. Sim, I. S. Oh, H. G. Lee, H. R. Kim, O. B. Hyun, "Design and Experiments of Novel Hybrid Type Superconducting Fault Current Limiters", IEEE Trans. Appl. Superconduct., vol.18, No.2, pp.624-627, June 2008. https://doi.org/10.1109/TASC.2008.920785
  6. O. B. Hyun, J. W. Sim, H. R. Kim, K. B. Park, S. W. Yim and I. S. Oh, "Reliability Enhancement of the Fast Switch in a Hybrid Superconducting Fault Current Limiter by Using Power Electronic Switches", IEEE Trans. Appl. Superconduct., vol. 19, No. 3, pp.1843-1846, June. 2009. https://doi.org/10.1109/TASC.2009.2018369
  7. J. S. Kim, S. H. Lim, J. C. Kim, J. S. Choi, "Analysis on Current Limiting Characteristics of a Hybrid SFCL with the First Half Cycle Limiting Operation Due to Resistance of Superconducting Element", Trans. KIEE, vol. 60, No. 10, pp.1817-1822, 2011. https://doi.org/10.5370/KIEE.2011.60.10.1817
  8. G. H. Lee, K. B. Park, J. Sim, Y. G. Kim, I. S. Oh, O. B. Hyun, B. W. Lee, "Hybrid Superconducting Fault Current Limiter of the First Half Cycle Non-Limiting Type", IEEE Trans. Appl. Superconduct., vol.19, No.3, pp.1888-1891, June 2009. https://doi.org/10.1109/TASC.2009.2017873
  9. Glover, J. D., Sarma, M. S., & Overbye, T. J., "Power System Analysis and Design", CI-Engineering, 5th ed., 2011.