참고문헌
- J. de Boeij, E. A. Lomonova, A. J. A. Vandenput, "Optimization of contactless planar actuator with manipulator", IEEE Trans. Magn., vol. 44, pp. 1118-1121, 2008. https://doi.org/10.1109/TMAG.2007.915873
- D. H. Kang, "A study on the design of transverse flux linear motor with high power density", IEEE International Symposium on, vol. 2, pp. 707-711, Aug. 2002.
- A. Chiba, K. Sotome, Y. Iiyama, and M. A. Rahman, "A novel middle-point-current-injection-type bearingless PM synchronous motor for vibration suppression", IEEE Trans. Ind. Appl., vol. 47, no. 4, pp. 1700-1706, July/Aug. 2011. https://doi.org/10.1109/TIA.2011.2155611
- D. Bang, H. Polinder, J. A. Ferreira, and S. S. Hong, "Structural mass minimization of large direct-drive wind generators using a buoyant rotor structure", Energy Conversion Congress and Exposition, 2010 IEEE, pp. 3561-3568, Sept. 2010.
- S. H. Hwang, H. Li, J. W. Park, J. M. Kim, and D. J. Bang, "Vector control of multiple-module transverse flux PM generator for large-scale direct-drive wind turbines," Energy Conversion Congress and Exposition, 2011 IEEE, pp. 2365-2372, Sept. 2011.
- W. Y. Kim, J. M. Lee, and S. J. Kim, "Rolling motion control of a levitated mover in a permanent-magnet-type bearingless linear motor", IEEE Trans. Magn., vol. 46, no. 6, pp. 2482-2485, June 2010. https://doi.org/10.1109/TMAG.2010.2043072
- W. G. Kim, S. J. Cho, "Control of transverse flux linear motor to the linear and curve section by using low-cost position sensors", Industrial Electronics, 2007. ISIE 2007 IEEE International Symposium on, pp. 1322-1326, Nov. 2007.
- V. Kluyskens, B. Dehez, and H. B. Ahmed, "Dynamical electromechanical model for magnetic bearings", IEEE Trans. Magn., vol. 43, no. 7, pp. 3287-3292, Jul. 2007. https://doi.org/10.1109/TMAG.2006.888740