Structural Engineering and Mechanics

  • 제49권4호
  • /
  • Pages.523-536
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strengthening methods for existing wall type structures by installing additional shear walls

  • Chung, Lan (Department of Architectural Engineering, Dankook University) ;
  • Park, Tae Won (Department of Architectural Engineering, Dankook University) ;
  • Hwang, Ji Hyun (Structural Engineering Research Division, Korea Institute of Construction Technology)
  • 투고 : 2013.05.21
  • 심사 : 2014.01.16
  • 발행 : 2014.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Before incorporating the earthquake-resistance design in design standard (1988) in South Korea, most of existing residential buildings were built without having lateral resistance capacity in addition to their structural peculiarity, such as exterior stair ways, exterior elevator room. For these reasons, the demands on retrofitting research for existing buildings arise recently and many retrofitting methods are proposed. These tasks are important to reduce the enormous economic loss and environmental issues. As the main purpose, this study was intended to examine the performance improvement in terms of ductility and strength in the wake of retrofitting and to suggest retrofitting details.

키워드

참고문헌

  1. Alam, M.I. and Kim, D. (2012), "Effect of constitutive material models on seismic response of two-story reinforced concrete frame", Int. J. Concrete Struct. Mater., 6, 101-110. https://doi.org/10.1007/s40069-012-0010-3
  2. Al-Nimry, H.S., Armouti, N.S. and Najmi, A.S. (2002), "Inelastic cyclic response of stone-concrete bearing walls", Proceedings of the 6th International Conference on Concrete Technology for Developing Countries, Jordan-Amman.
  3. ATC-40, Seismic Evaluation and Retrofit of Concrete Buildings.
  4. Binici, B., Ozcebe, G. and Ozcelik, R. (2007), "Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames", Compos. Part B: Eng., 38, 575-583. https://doi.org/10.1016/j.compositesb.2006.08.007
  5. Bozdogan, K.B. (2013), "Free vibration analysis of asymmetric shear wall-frame buildings using modified finite element-transfer matrix method", Struct. Eng. Mech., 46(1), 1-17. https://doi.org/10.12989/sem.2013.46.1.001
  6. Carpinteri, A., Corrado, M., Lacidogna, G. and Cammarano, S. (2012), "Lateral load effects on tall shear wall structures of different height", Struct. Eng. Mech., 41(3), 313-337. https://doi.org/10.12989/sem.2012.41.3.313
  7. Hitakis, S., Lau, D. T. and Londono, N. (1999), "Research on seismic retrofit and rehabilitation of reinforced concrete shear walls using FRP materials", Carleton University, Ottawa, Ontario, Canada.
  8. Japan, A.I.o. (1996), Report on Kobe Earthquake Damage.
  9. KBC (2009), Korea Building Code, Ministry of Land, Transport and Maritime affairs.
  10. Lee, H.S., Woo, S.W. and Her, Y.S. (1999), "A study of correlation between experiment and analysis of nonlinear behaviors of A 1:5 scale RC frame with nonseismic details", KCI-1999 Conference, 483-486.
  11. Marini, A. and Meda, A. (2009), "Retrofitting of R/C shear walls by means of high performance jackets", Eng. Struct., 31, 3059-3064. https://doi.org/10.1016/j.engstruct.2009.08.005
  12. MIDAS-IT (2006), http://en.midasit.com/midasit/>2013.
  13. Moehle, J.P. (1999), "State of Research on Seisimic Retrofit of Concrete Building Structures in the US", US-Japan Performance -Based Engineering Methodolog for Reinforced Concrete Building Structures-State of Research and Practice, University of California, Berkeley.
  14. Park, T., Kim, J. and Chung, L. (2011), "Seismic performance evaluation of tall and Nonseismic-designed wall-type structures by shaking table tests", Struct. Des. Tall Spec. Build., 20, 314-326. https://doi.org/10.1002/tal.558
  15. Priestley, M.J.N. and Seible, F. (1995), "Design of seismic retrofit measures for concrete and masonry structures", Constr. Build. Mater., 9(5), 365-377. https://doi.org/10.1016/0950-0618(95)00049-6
  16. Rahai, A. and Hatami, F. (2009), "Evaluation of composite shear wall behavior under cyclic loadings", J. Constr. Steel Res., 65, 1528-3064. https://doi.org/10.1016/j.jcsr.2009.03.011

피인용 문헌

  1. Numerical modeling of the aging effects of RC shear walls strengthened by CFRP plates: A comparison of results from different "code type" models vol.19, pp.5, 2014, https://doi.org/10.12989/cac.2017.19.5.579