DOI QR코드

DOI QR Code

Ambient vibration testing of Berta Highway Bridge with post-tension tendons

  • 투고 : 2013.05.21
  • 심사 : 2013.09.17
  • 발행 : 2014.01.25

초록

The aim of this study is to determine the dynamic characteristics of long reinforced concrete highway bridges with post-tension tendons using analytical and experimental methods. It is known that the deck length and height of bridges are affected the dynamic characteristics considerably. For this purpose, Berta Bridge constructed in deep valley, in Artvin, Turkey, is selected as an application. The Bridge has two piers with height of 109.245 m and 85.193 m, and the total length of deck is 340.0 m. Analytical and experimental studies are carried out on Berta Bridge which was built in accordance with the balanced cantilever method. Finite Element Method (FEM) and Operational Modal Analysis (OMA) which considers ambient vibration data were used in analytical and experimental studies, respectively. Finite element model of the bridge is created by using SAP2000 program to obtain analytical dynamic characteristics such as the natural frequencies and mode shapes. The ambient vibration tests are performed using Operational Modal Analysis under wind and human loads. Enhanced Frequency Domain Decomposition (EFDD) and Stochastic Subspace Identification (SSI) methods are used to obtain experimental dynamic characteristics like natural frequencies, mode shapes and damping ratios. At the end of the study, analytical and experimental dynamic characteristic are compared with each other and the finite element model of the bridge was updated considering the material properties and boundary conditions. It is emphasized that Operational Modal Analysis method based on the ambient vibrations can be used safely to determine the dynamic characteristics, to update the finite element models, and to monitor the structural health of long reinforced concrete highway bridges constructed with the balanced cantilever method.

키워드

참고문헌

  1. Altunisik, A.C., Bayraktar, A., Sevim, B. and Ates, S. (2011), "Ambient vibration based seismic evaluation of isolated Gulburnu Highway Bridge", Soil Dyn. Earthq. Eng., 31(11), 1496-1510. https://doi.org/10.1016/j.soildyn.2011.05.020
  2. Bayraktar, A., Altunisik, A.C. and Ozcan, M. (2012), "Safety assessment of structures for near-field blast-induced ground excitations using operational modal analysis", Soil Dyn. Earthq. Eng., 39, 23-36. https://doi.org/10.1016/j.soildyn.2012.02.005
  3. Bayraktar, A., Altunisik, A.C., Sevim, B. and Turker, T. (2010), "Finite element model updating of Komurhan Highway Bridge based on experimental measurements", Smart Struct. Syst., Int. J., 6(4), 373-388. https://doi.org/10.12989/sss.2010.6.4.373
  4. Bayraktar, A., Altunisik, A.C., Sevim, B., Turker, T., Domanic, A. and Tas, Y. (2009), "Vibration characteristics of Komurhan Highway Bridge constructed with balanced cantilever method", J. Perform. Constr. Facil., 23(2), 90-99. https://doi.org/10.1061/(ASCE)0887-3828(2009)23:2(90)
  5. Benedettini, F. and Gentile, C. (2011), "Operational modal testing and FE model tuning of a cable-stayed bridge", Eng. Struct., 33(6), 2063-2073. https://doi.org/10.1016/j.engstruct.2011.02.046
  6. Bendat, J.S. and Piersol, A.G. (2004), Random Data: Analysis and Measurement Procedures, John Wiley and Sons, USA.
  7. Bozdag, E., Sunbuloglu, E. and Ersoy, H. (2006), "Vibration analysis of new galata bridge: Experimental and numerical results", Comput. Struct., 84(5-6), 283-292. https://doi.org/10.1016/j.compstruc.2005.09.018
  8. Brownjohn, J.M.W., Magalhae, F., Caetano, E. and Cunha, A. (2010), "Ambient vibration re-testing and operational modal analysis of the Humber Bridge", Eng. Struct., 32(8), 2003-2018. https://doi.org/10.1016/j.engstruct.2010.02.034
  9. Brownjohn, J.M.W., Moyo, P., Omenzetter, P. and Yong, L. (2003), "Assessment of highway bridge upgrading by dynamic testing and finite-element model updating", J. Bridge Eng., ASCE, 8(3), 162-172. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:3(162)
  10. Chen, Y. (2006), "Methodology for vibration-based highway bridge structural health monitoring", Doctorate Thesis, University of California, Irvine.
  11. Conte, J.P., He, X., Moaveni, B., Masri, S.F., Caffrey, J.P., Wahbeh, M., Tasbihgoo, F., Whang, D.H. and Elgamal, A. (2008), "Dynamic testing of alfred zampa memorial bridge", J. Struct. Eng., 134(6), 1006-1015. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(1006)
  12. DOLSAR (2007), Construction and Limited Company, Berta Bridge Projects.
  13. El-Borgi, S., Choura, S., Ventura, C., Baccouch, M. and Cherif, F. (2005), "Modal identification and model updating of a reinforced concrete bridge", Smart Struct. Syst., Int. J., 1(1), 83-101. https://doi.org/10.12989/sss.2005.1.1.083
  14. Ewins, D.J. (1984), Modal Testing: Theory and Practice, Letchworth, Hertfordshire, England: Research Studies Press, New York.
  15. Feng, M.Q., Kim, D.K., Yi, J.H. and Chen, Y. (2004), "Baseline models for bridge performance monitoring", J. Eng. Mech., ASCE, 130(5), 562-569. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(562)
  16. Gentile, C. and Saisi, A. (2011), "Ambient vibration testing and condition assessment of the Paderno iron arch bridge (1889)", Construct. Build. Mater., 25(9), 3709-3720. https://doi.org/10.1016/j.conbuildmat.2011.04.019
  17. Guan, H. (2006), "Vibration-based structural health monitoring of highway bridges", Doctorate Thesis, University of California, San Diego.
  18. Jacobsen, N.J., Andersen, P. and Brincker, R. (2006), "Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in operational modal analysis", Proceedings of ISMA2006: International Conference on Noise & Vibration Engineering, Leuven, Belgium, September.
  19. Karbhari, V.M. (2007), "Long-term structural health monitoring system for a FRP composite highway bridge structure", J. Intel. Mat. Syst. Struct., 18(8), 809-823. https://doi.org/10.1177/1045389X06073471
  20. Kwasniewski, L., Wekezer, J., Roufa, G., Hongyi, L., Ducher, J. and Malachowski, J. (2006), "Experimental evaluation of dynamic effects for a selected highway bridge", J. Perform. Construct. Facil., ASCE, 20(3), 253-260. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:3(253)
  21. Liu, C., DeWolf, J.T. and Kim, J.H. (2009), "Development of a baseline for structural health monitoring for a curved post-tensioned concrete box girder bridge", Eng. Struct., 31(12), 3107-3115. https://doi.org/10.1016/j.engstruct.2009.08.022
  22. Magalhaes, F., Cunha, A. and Caetano, E. (2012), "Vibration based structural health monitoring of an arch bridge: From automated OMA to damage detection", Mech. Syst. Signal Process., 28, 212-228. https://doi.org/10.1016/j.ymssp.2011.06.011
  23. Maeck, J., Peeters, B. and DeRoeck, G. (2001), "Damage identification on the Z24 Bridge using vibration monitoring", Smart Mater. Struct., 10(3), 512-517. https://doi.org/10.1088/0964-1726/10/3/313
  24. OMA (2006), Operational Modal Analysis, Release 4.0, Structural Vibration Solution A/S, Denmark.
  25. Peeters, B. and De Roeck, G. (1999), "Reference based stochastic subspace identification in civil engineering", Proceedings of the 2nd International Conference on Identification in Engineering Systems, Swansea, UK, pp. 639-648.
  26. Peeters, B. (2000), "System identification and damage detection in civil engineering", Ph.D. Thesis, K.U, Leuven, Belgium.
  27. PULSE (2006), Labshop, Version 11.2.2, Bruel & Kjaer Sound and Vibration Measurement A/S.
  28. Rainieri, C., Fabbrocino, G., Cosenza, E. and Manfredi, G. (2007), "Implementation of OMA procedures using labview: Theory and application", The 2nd International Operational Modal Analysis Conference, Copenhagen, Denmark, April-May, pp. 1-13.
  29. Ren, W.X., Zhao, T. and Harik, I.E. (2004), "Experimental and analytical modal analysis of steel arch bridge", J. Struct. Eng., ASCE, 130(7), 1022-1031. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:7(1022)
  30. Siringoringo, D.M. and Fujino, Y. (2008), "System identification applied to long-span cable-supported bridges using seismic records", Earthq. Eng. Struct. Dyn., 37(3), 364-386.
  31. Turan, F.N. (2012), "Determination of dynamic characteristics of balanced cantilever reinforced concrete b using ambient vibration data", Master Thesis, Institute of Science, Karadeniz Technical University, Turkey.
  32. Van Overschee, P. and De Moor, B. (1996), Subspace Identification for Linear Systems: Theory - Implementation - Applications, Kluwer Academic Publishers, Dordrecht, NL.
  33. Wang, H., Li, A.Q., Jiao, C.K. and Li, X.P. (2010), "Characteristics of strong winds at the Runyang Suspension Bridge based on field tests from 2005 to 2008", J. Zhejiang Univ. SCI. A, 11(7), 465-476.
  34. Yu, D.J. and Ren, W.X. (2005), "EMD-based stochastic subspace identification of structures from operational vibration measurements", Eng. Struct., 27(12), 1741-1751. https://doi.org/10.1016/j.engstruct.2005.04.016

피인용 문헌

  1. A simplified frequency formula for post-tensioned balanced cantilever bridges vol.20, pp.7, 2014, https://doi.org/10.1007/s42107-019-00160-y
  2. Application of the Subspace-Based Methods in Health Monitoring of Civil Structures: A Systematic Review and Meta-Analysis vol.10, pp.10, 2014, https://doi.org/10.3390/app10103607
  3. An integrated approach for structural behavior characterization of the Gravina Bridge (Matera, Southern Italy) vol.20, pp.6, 2014, https://doi.org/10.1177/1475921720987544