DOI QR코드

DOI QR Code

Generalized Stability Criterion for Multi-module Distributed DC System

  • Liu, Fangcheng (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University) ;
  • Liu, Jinjun (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University) ;
  • Zhang, Haodong (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University) ;
  • Xue, Danhong (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University)
  • 투고 : 2013.07.19
  • 발행 : 2014.01.20

초록

The stability issues of a multi-module distributed DC power system without current-sharing loop are analyzed in this study. The physical understanding of the terminal characteristics of each sub-module is focused on. All the modules are divided into two groups based on the different terminal property types, namely, impedance (Z) and admittance (Y) types. The equivalent circuits of each group are established to analyze the stability issues, and the mathematical equations of the equivalent circuits are derived. A generalized criterion for multi-module distributed systems is proposed based on the stability criterion in a cascade system. The proposed criterion is independent of the power flow direction.

키워드

참고문헌

  1. Y. Panov, J. Rajagopalan, and F. C.Lee, "Analysis and design of N paralleled DC-DC converters with master-slave current-sharing control," Applied Power Electronics Conference and Exposition, 1997. Twelfth Annual, Vol. 1, pp.436-442, Feb. 1997.
  2. X. Xie, S. Yuan, J. Zhang, and Z. Qian, "Analysis and Design of N paralleled DC/DC Modules with Current-Sharing Control," Power Electronics Specialists Conference, 2006. PESC '06. 37th IEEE , pp. 1-4, Jun. 2006.
  3. V. J. Thottuvelil and G. C. Verghese, "Analysis and control design of paralleled DC/DC converters with current sharing," IEEE Trans. Power Electron, Vol. 13, No. 4, pp.635-644, Jul. 1998. https://doi.org/10.1109/63.704129
  4. D. Hou, J. Liu, H. Wang, and W. Huang, "The stability analysis and determination of multi-module distributed power electronic systems," Power Electronics for Distributed Generation Systems (PEDG), 2010 2nd IEEE International Symposium on, pp.577-583, Jun. 2010.
  5. R. D. Middlebrook, "Design techniques for preventing input-filter oscillations in switched-mode regulators," in Proc. Powercon 5, pp. A3-1-A3-16, 1978.
  6. T. Suntio, J. Leppaaho, J. Huusari, and L. Nousiainen, "Issues on solar-generator interfacing with current-fed MPP-tracking converters," IEEE Trans. Power Electron, Vol. 25, No. 9, pp.2409-2419, Sep. 2010. https://doi.org/10.1109/TPEL.2010.2048580
  7. J. Sun, "Impedance-based stability criterion for grid-connected inverters," IEEE Trans. Power Electron, Vol. 26, No. 11, pp.3075-3078, Nov. 2011. https://doi.org/10.1109/TPEL.2011.2136439
  8. F. Liu, J. Liu, B. Zhang, H. Zhang, S. U. Hasan, and S. Zhou, "Unified stability criterion of bidirectional power flow cascade system," Applied Power Electronics Conference and Exposition, 2013. Twenty-Eighth Annual IEEE, pp.2618-2623, Mar. 2013.
  9. H. Wang, J. Liu, and W. Huang, "Stability prediction based on individual impedance measurement for distributed DC power systems," Power Electronics and ECCE Asia (ICPE & ECCE), 2011 IEEE 8th International Conference on, pp.2114-2120, May./Jun. 2011.
  10. T. Suntio, Dynamic Profile of Switched-Mode Converter: Modeling, Analysis and Control, Wiley Publications, 2009.
  11. M. Driels, Linear Control Systems Engineering, Tsinghua University Press, 2000.
  12. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd edition. New York: Kluwer, 2001.
  13. R. D. Middlebrook and S. Cuk. "A general unified approach to modelling switching-converter power stages," In Power Electronics Specialists Conference, Vol. 1, pp. 18-34. Jun. 1976.
  14. A. Capel, J. C. Marpinard, J. Jalade, and M. Valentin, "Current fed and voltage fed switching DC/DC converters - steady state and dynamic models their applications in space technology," Telecommunications Energy Conference, 1983. INTELEC '83. Fifth International, pp.421-430, 1983.
  15. D. Marx, P. Magne, B. Nahid-Mobarakeh, S. Pierfederici, and B. Davat, "Large signal stability analysis tools in dc power systems with constant power loads and variable power loads-A review," IEEE Trans. Power Electron, Vol. 27, No. 4, pp.1773-1787, Apr. 2012. https://doi.org/10.1109/TPEL.2011.2170202
  16. W. Du, J. Zhang, Y. Zhang, and Z. Qian, "Stability criterion for cascaded system with constant power load," IEEE Trans. Power Electron, Vol. 28, No. 4, pp.1843-1851, Apr. 2013. https://doi.org/10.1109/TPEL.2012.2211619
  17. E. Deng, "I. Negative Incremental Impedance of Fluorescent Lamps II. Simple High Power Factor Lamp Ballasts", PhD thesis, California Institute of Technology, Pasadena, California, 1996.
  18. E. Deng and S. Cuk, "Negative incremental impedance and stability of fluorescent lamps," Applied Power Electronics Conference and Exposition, 1997. Twelfth Annual, Vol. 2, pp.1050-1056, 1997.
  19. Y. Panov and M. Jovanovic, "Practical issues of input/output impedance measurements in switching power supplies and application of measured data to stability analysis," Applied Power Electronics Conference and Exposition, 2005. Twentieth Annual IEEE, Vol. 2, pp.1339-1345, Mar. 2005.
  20. M. Liu, H. Yuan, Y. Sun, and C. Yang, "Research on measurement of DC power supply impedance," Electronic Measurement & Instruments, 2009. ICEMI '09. 9th International Conference on, pp.2-703,2-706, Aug. 2009.
  21. R. Ridley, "Measuring frequency response: tips and methods," Switching Power Magazine, Vol. 3, No. 2, pp. 12-27, Spring 2002.
  22. C. K. Alexander and M. N. O. Sadiku, Fundamentals of Electric Circuits, McGraw-Hill Higher Education. 2005.
  23. F. Liu, J. Liu, B. Zhang, H. Zhang, and S. U. Hasan, "General impedance/admittance stability criterion for cascade system," ECCE Asia Downunder (ECCE Asia), 2013 IEEE, pp.422-428, 2013.
  24. K. Xing, J. Guo, W. Huang, D. Peng, F. C. Lee, and D. Borojevic, "An active bus conditioner for a distributed power system," Power Electronics Specialists Conference, 1999. PESC 99. 30th Annual IEEE, Vol. 2, pp.895-900, 1999.
  25. R. Ahmadi, D. Paschedag, and M. Ferdowsi, "Closed-loop input and output impedances of DC-DC switching converters operating in voltage and current mode control," IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, pp.2311-2316, 2010.
  26. M. K. Kazimierceuk, R. C. Cravens, and J. P. Harrington, "Closed-loop input impedance of a voltage-mode-controlled PWM boost DC-DC converter for CCM," Circuits and Systems, 1994., Proceedings of the 37th Midwest Symposium on , Vol. 2, pp.1253-1256, 1994.
  27. D. Kim, D. Son, and B. Choi, "Input impedance analysis of PWM DC-to-DC converters," Applied Power Electronics Conference and Exposition, 2006. Twenty-First Annual IEEE, pp. 1339-1346, 2006.
  28. B. T. Irving and M. M. Jovanovic, "Analysis, design, and performance evaluation of droop current-sharing method," Applied Power Electronics Conference and Exposition, 2000. Fifteenth Annual IEEE, Vol. 1, pp.235-241, 2000.
  29. J. W. Kim, H. S. Choi, and B. H. Cho, "A novel droop method for converter parallel operation," IEEE Trans. Power Electron, Vol. 17, No. 1, pp. 25-32, Jan. 2002. https://doi.org/10.1109/63.988666

피인용 문헌

  1. Sequence-Impedance-Based Harmonic Stability Analysis and Controller Parameter Design of Three-Phase Inverter-Based Multibus AC Power Systems vol.32, pp.10, 2017, https://doi.org/10.1109/TPEL.2016.2637883