참고문헌
- Allel, M., Mohamed, A. and Ahmed, B. (2013), "Stability condition for the evaluation of damage in three-point bending of a laminated composite", Steel Compos. Struct., 15(2), 203-220. https://doi.org/10.12989/scs.2013.15.2.203
- ASTM E1300-09a (2009), Standard practice for detennining load resistance of glass in buildings, New York.
- Bati, S.B., Ranocchiai, G., Reale, C. and Rovero, L. (2010), "Time-dependent behavior of laminated glass", J. Mater. Civ. Eng., 22(4), 389-396. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000032
- Behr, R.A., Minor, J.E. and Linden, M.P. (1986), "Load duration and interlayer thickness effects on laminated glass", J. Struct. Eng., 112(6), 1441-1453. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:6(1441)
- Behr, R.A., Minor, J.E. and Norville, H.S. (1993), "Structural behavior architectural LG", J. Struct. Eng., 119(1), 202-222. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:1(202)
- Bennison, S.J., Davies, P.S., Van Duser, A. and Jagota, A. (2001), "Structural performance of laminated safety glass made with 'stiff' interlayers", Proceedings of Glass Performance Days, Tampere, Finland, June.
- Callaghan, J.O. (2012), "Adventures with structural glass", Proceedings of Glass Performance Days, Sao Paulo, Brazil, June.
- Callewaert, D., Belis, J., Delince, D. and Impe, R.V. (2012), "Experimental stiffness characterisation of glass/ionomer laminates for structural applications", Constr. Build. Mater., 37, 685-692. https://doi.org/10.1016/j.conbuildmat.2012.07.035
- Ferry, J.D. (1980), Viscoelastic Properties of Polymers, (3rd Edition), John Wiley & Sons, New York, USA
- JGJ 102-2003 (2003), Technical code for glass curtain wall engineering, Beijing.
- Ledbetter, S.R., Walker, A.R. and Keiller, A.P. (2006), "Structural use of glass", J. Archit. Eng., 12(3), 137-149. https://doi.org/10.1061/(ASCE)1076-0431(2006)12:3(137)
- prEN 13474-1 (1999), Glass in building-design of glass panes-part1: General basis of design, London.
- prEN 16612 (2013). Glass in building-determination of the load resistance of glass panes by calculation and testing, London.
- Rezaiee-Pajand, M., Shahabian, F. and Tavakoli, F.H. (2012), "A new higher-order triangular plate bending element for the analysis of laminated composite and sandwich plates", Struct. Eng. Mech., 43(2), 253-271. https://doi.org/10.12989/sem.2012.43.2.253
- Yin, Y.W., Zhang, Q.L. and Huang, Q.W. (2004), "Experimental study on load bearing capacity of point-supported mid-hollow and laminated glasses", J. Build Struct., 25(1), 93-98.
피인용 문헌
- Influence of Interlayers on the Flexural Performance of Four-Side Supported Laminated Glass at Room Temperature vol.18, pp.1, 2015, https://doi.org/10.1260/1369-4332.18.1.33
- The flexural performance of laminated glass beams under elevated temperature vol.52, pp.3, 2014, https://doi.org/10.12989/sem.2014.52.3.603
- Biaxial creep property of ethylene tetrafluoroethylene (ETFE) foil vol.54, pp.5, 2015, https://doi.org/10.12989/sem.2015.54.5.973
- Experimental investigation of multi-layered laminated glass beams under in-plane bending vol.60, pp.5, 2016, https://doi.org/10.12989/sem.2016.60.5.781
- Comparison of viscoelastic finite element models for laminated glass beams vol.131-132, 2017, https://doi.org/10.1016/j.ijmecsci.2017.05.035
- 3D Adaptive Combined DE/FE Algorithm for Analyzing Impact Fracture of Laminated Glass pp.1793-6969, 2019, https://doi.org/10.1142/S0219876218501013