References
- Abe, T., Cheng, Y., and Felice, M., "Advanced CAE Methods for Automotive Drivetrain System Gear Whine Optimization", Proceedings of MPT2009-Sendai, JSME International Conference on Motion and Power Transmission, pp. 1-15., 2009
- Kamaya, F., Eccles, M., and Pears, J., "A Rapid Method for the investigation of System-Wide Parameter Variation Effects on Epicyclic Gear Whine", Transactions of Society of Automotive Engineers of Japan, Vol. 39, No. 6, pp. 6_47-6_52., 2008
- Pears, J., Curtis, S., Poon, A., Smith, A., Poon, D. and Palmer, D., "Investigation of Methods to Predict Parallel and Epicyclic Gear Transmission Error", 2005 SAE World Congress, SAE Technical Paper: 2005-01-1818., 2005
- Pears, J., Smith, A., Platten, M., Willson, B., Cheng, Y., and Felice, M., "Predictin Variation in the NVH Characteristics of an Sutomatic Transmission using a Detailed Parametric Modeling Approach", SAE 2007 Noise and Vibration Conference and Exhibition, SAE Technical Paper: 2007-01-2234., 2007
- Hong, S. O. and Cho, G. J., "A Study on Preload and Arragement of Combined bearing on Feed Drive System", Proc. of KSMTE Autumn conference, pp.440-445., 1999
- American Gear Manufacturers Association (AGMA), "Design Manual for Enclosed Epicyclic Gear Drives", ANSI/AGMA 6123-B06., 2006
- International Organization for Standardization (ISO), "Calculation of load capacity of spur and helical gears", ISO 6336-1., 2007
- Romax Technology Ltd, RomaxDesigner Software Manual, Nottngham, UK., 2003
- Kim, J. G., Lee, G. H., Park, Y. J., and Kim, J. H., "Effects of Bearing Internal Clearance on the Load Distribution and Load Sharing in thr Pitch Reducer for Wind Turbines", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22 No.1 (2013), pp. 29-35., 2013 https://doi.org/10.7735/ksmte.2013.22.1.29
Cited by
- Influence of the Carrier Pinhole Position Errors on the Load Sharing of a Planetary Gear Train vol.19, pp.4, 2018, https://doi.org/10.1007/s12541-018-0065-4
- 유성기어박스의 캐리어 핀홀 위치 오차의 위상에 따른 유성기어의 하중 분할 연구 vol.34, pp.6, 2014, https://doi.org/10.7736/kspe.2017.34.6.377
- 굴삭기 선회시스템의 관성 내구 시험을 위한 플라이휠의 등가관성 모멘트 결정 vol.34, pp.6, 2014, https://doi.org/10.7736/kspe.2017.34.6.383
- 실부하 적용을 통한 농용 트랙터 변속기 해석 vol.19, pp.11, 2014, https://doi.org/10.14775/ksmpe.2020.19.11.042