International Journal of Concrete Structures and Materials

  • 제8권3호
  • /
  • Pages.213-228
  • /
  • 2014
  • /
  • 1976-0485(pISSN)
  • /
  • 2234-1315(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

Characterizations and Quantitative Estimation of Alkali-Activated Binder Paste from Microstructures

  • Kar, Arkamitra (Civil and Environmental Engineering, West Virginia University) ;
  • Ray, Indrajit (Civil Engineering, Purdue University Calumet) ;
  • Halabe, Udaya B. (Civil and Environmental Engineering, West Virginia University) ;
  • Unnikrishnan, Avinash (Civil and Environmental Engineering, West Virginia University) ;
  • Dawson-Andoh, Ben (Wood Science and Technology, Division of Forestry and Natural Resources, West Virginia University)
  • 투고 : 2013.09.19
  • 심사 : 2014.01.06
  • 발행 : 2014.09.30
⟨ 이전 논문 다음 논문 ⟩

초록

Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N-A-S-H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N-A-S-H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N-A-S-H and CSH(S) were in close agreement with each other. The $R^2$ values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.

키워드

참고문헌

  1. ASTM 7777C618. (2013). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
  2. ASTM C989. (2013). Standard specification for slag cement for use in concrete and mortars. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
  3. ASTM C33 M-13. (2013). Standard specification for concrete aggregates. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
  4. ASTM C494 Type F. (2013). Specification for chemical admixtures for concrete. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
  5. Barbosa, V. F. F., Mackenzie, K. J. D., & Thaumaturgo, C. (2000). Synthesis and thermal behaviour of potassium sialate geopolymers. Materials Letters, 57, 1477-1482.
  6. Bazaara, M. S., Sherali, H. D., & Shetty, C. M. (2006). Nonlinear programming: Theory and algorithms. Hoboken, NJ: Wiley.
  7. Breck, D. W. (1974). Zeolite molecular sieves, structure, chemistry and use. New York, NY: Wiley.
  8. Chen, W., & Brouwers, H. J. H. (2007). The hydration of slag, part 1: Reaction models for alkali-activated slag. Journal Materials Science, 42, 428-443. https://doi.org/10.1007/s10853-006-0873-2
  9. Davidovits, J. (1982). Mineral polymers and methods of making them. US Patent 4,349,386.
  10. Davidovits, J. (1983). Geopolymer chemistry and properties. Proceedings of geopolymer'88. Compiegne, France, 1-3, June 1988.
  11. Davidovits, J. (1988). Geopolymers of the first generation: SILIFACEProcess. In: J. Davidovits, & J. Orlinski (Eds.), Proceedings of the 1st international conference on geopolymer '88, Vol. 1, Compiegne, France.
  12. Davidovits, J. (1991). Geopolymers: Inorganic polymeric new materials. Journal of Thermal Analysis, 37, 1633-1656. https://doi.org/10.1007/BF01912193
  13. Davidovits, J. (1994). Geopolymers: Inorganic polymeric new materials. Journal of Materials Education, 16, 91-139.
  14. Davidovits, J. (1999). Geopolymeric reactions in the economic future of cements and concretes: world-wide mitigation of carbon dioxide emission. In: J. Davidovits, R. Davidovits, & C. James (Eds.), Proceedings of the 2nd international conference on geopolymer'99. Saint Qunentin, France, June 30-July 2, pp. 111-121.
  15. De Silva, P., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007). Kinetics of geopolymerization: Role of ${Al_2O_3}$ and ${SiO_2}$. Cement and Concrete Research, 37, 512-518. https://doi.org/10.1016/j.cemconres.2007.01.003
  16. Drud, A. (2010). CONOPT user guide. Bagsvaerd, Denmark: ARKI Consulting and Development A/S. http://www.gams.com/dd/docs/solvers/conopt.pdf. Last Accessed 14th August 2013.
  17. Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005). Effect of alkali cations on aluminium incorporation in geopolymeric gels. Industrial and Engineering Chemistry Research, 44, 832-839. https://doi.org/10.1021/ie0494216
  18. Famy, C., Brough, A. R., & Taylor, H. F. W. (2003). The C-S-H gel of Portland cement mortars: Part I. The interpretation of energy-dispersive X-ray microanalyses from scanning electron microscopy, with some observations on C-S-H, AFm and AFt phase compositions. Cement and Concrete Research, 23, 1389-1398.
  19. Feng, X., Garboczi, E. J., Bentz, D. P., Stutzman, P. E., & Mason, T. O. (2004). Estimation of the degree of hydration of blended cement pastes by a scanning electron microscopy point-count procedure. Cement and Concrete Research, 34(10), 1787-1793. https://doi.org/10.1016/j.cemconres.2004.01.014
  20. Fernandez-Jimenez, A., de la Torre, A. G., Palomo, A., Lopez-Olmo, G., Alonso, M. M., & Aranda, M. A. G. (2006). Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction. Fuel, 85, 1960-1969. https://doi.org/10.1016/j.fuel.2006.04.006
  21. Fernandez-Jimenez, A., & Puertas, F. (1997). Alkali-activated slag cements: Kinetic studies. Cement and Concrete Research, 27(3), 359-368. https://doi.org/10.1016/S0008-8846(97)00040-9
  22. Kamhangrittirong, P., Suwanvitaya, P., Suwanvitaya, P., & Chindaprasirt, P. (2007). Green binder technology development using fly ash based geopolymer. JSPS-DOST international symposium on environmental engineering, symposium on harmonizing infrastructure development with the environment, Phillipines.
  23. Kar, A., Halabe, U. B., Ray, I., & Unnikrishnan, A. (2013). Nondestructive characterizations of alkali activated fly ash and/or slag concrete. European Scientific Journal, 9(24), 52-74.
  24. Kar, A., Ray, I., Unnikrishnan, A., & Davalos, J. F. (2012a). Estimation of C-S-H and calcium hydroxide for cement pastes containing slag and silica fume. Construction and Building Materials, 30, 505-515. https://doi.org/10.1016/j.conbuildmat.2011.12.029
  25. Kar, A., Ray, I., Unnikrishnan, A., & Davalos, J. F. (2012b). Microanalysis and optimization-based estimation of C-SH contents of cementitious systems containing fly ash and silica fume. Cement & Concrete Composites, 34, 419-429. https://doi.org/10.1016/j.cemconcomp.2011.09.008
  26. Kupwade-Patil, K., & Allouche, E. (2011). Effect of alkali silica reaction (ASR) in Geopolymer Concrete. World of Coal Ash (WOCA) conference, May 9-12, Devnver, CO, USA.
  27. Lee, W. K. W., & van Deventer, J. S. J. (2002). Effects of anions on the formation of aluminosilicate gel in geopolymers. Industrial and Engineering Chemistry Research, 41(18), 4550-4558. https://doi.org/10.1021/ie0109410
  28. Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2009). Microscopy and microanalysis of inorganic polymer cements. 2: The gel binder. Journal of Materials Science, 44(2), 620-631. https://doi.org/10.1007/s10853-008-3078-z
  29. Muzek, M. N., Zelic, J., & Jozic, D. (2012). Microstructural characteristics of geopolymers based on alkali-activated fly ash. Chemical and Biochemical Engineering Quarterly, 26(2), 89-95.
  30. Provis, J. L., & van Deventer, J. S. J. (2009). Geopolymers: Structure, processing, properties and industrial applications. Oxford: Woodhead; Boca Raton, FL: CRC Press.
  31. Rees, C. A. (2007). Mechanisms and kinetics of gel formation in geopolymers. Ph.D. Thesis submitted to the Department of Chemical and Biomolecular Engineering, University of Melbourne.
  32. Rees, C., Lukey, G. C., & Van Deventer, J. S. J. (2004). The role of solid silicates on the formation of geopolymers derived from coal ash. International symposium of research students on material science and engineering, December 20-22, Chennai, India, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras.
  33. Rosenthal, R. E. (2008). GAMS-A user guide. Washington DC: Gams Development Corporation.
  34. Sakulich, A. R. (2009). Characterization of environmentally-friendly alkali activated slag cements and ancient building materials. Ph.D. Thesis, Drexel University, Philadelphia, PA.
  35. Shi, C., Krivenko, P., & Roy, M. (2006). Alkali-activated cements and concretes. London: Taylor & Francis.
  36. Skvara, F., Kopecky, L., Nemecek, J., & Bittnar, Z. (2006). Microstructure of geopolymer materials based on fly ash. Cermaics-Silikaty, 50, 208-215.
  37. Smilauer, V., Hlavacek, P., Skvara, F., Sulc, R., Kopecky, L., & Nemecek, J. (2011). Micromechanical multiscale model for alkali activation of fly ash and metakaolin. Journal of Materials Science. doi:10.1007/s10853-011-5601-x.
  38. Smith, J. W., & Comrie, D. C. (1988). Geopolymeric building materials in third world countries. In: J. Davidovits & J. Orlinski (Eds.), Proceedings of the 1st international conference of geopolymer'88, Vol. 1, Compiegne, France, 1-3 June, pp. 89-92.
  39. Talling, B., & Brandstetr, J. (1995). Clinker-free concrete based on alkali activated slag. In S. L. Sarkar & S. N. Ghosh (Eds.), Progress in cement and concrete: Mineral admixtures in cement and concrete. New Delhi, India: Akademia Books International.
  40. Taylor, H. F. W. (1997). Cement Chemistry (2nd ed.). Thomas Telford.
  41. Van Jaarsveld, J. G. S. (2000). The physical and chemical characterisation of fly ash based geopolymers. PhD Thesis, Department of Chemical Engineering, University of Melbourne, Australia.

피인용 문헌

  1. Effect of Autoclave Curing on the Microstructure of Blended Cement Mixture Incorporating Ground Dune Sand and Ground Granulated Blast Furnace Slag vol.9, pp.3, 2014, https://doi.org/10.1007/s40069-015-0104-9
  2. Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash vol.9, pp.3, 2014, https://doi.org/10.1007/s40069-015-0111-x
  3. An Alkali Activated Binder for High Chemical Resistant Self-Leveling Mortar vol.6, pp.4, 2014, https://doi.org/10.4236/ojcm.2016.64013
  4. Investigation on the Effectiveness of Aqueous Carbonated Lime in Producing an Alternative Cementitious Material vol.10, pp.1, 2016, https://doi.org/10.1007/s40069-016-0129-8
  5. Prediction models for compressive strength of concrete with Alkali-activated binders vol.17, pp.4, 2014, https://doi.org/10.12989/cac.2016.17.4.523
  6. Characterization of building derived materials for partial replacement of pavement subgrade layer vol.3, pp.1, 2014, https://doi.org/10.1007/s41062-018-0183-y
  7. Stabilization of Expansive Clays by Combined Effects of Geopolymerization and Fiber Reinforcement vol.101, pp.1, 2014, https://doi.org/10.1007/s40030-019-00418-3
  8. Effect of Fiber Reinforcement on Mechanical Behavior of Alkali-Activated Binder-Treated Expansive Soil: Reliability-Based Approach vol.20, pp.12, 2020, https://doi.org/10.1061/(asce)gm.1943-5622.0001871
  9. Flexural Capacity and Behaviour of Geopolymer Concrete Beams Reinforced with Glass Fibre-Reinforced Polymer Bars vol.14, pp.1, 2014, https://doi.org/10.1186/s40069-019-0389-1
  10. Performance of alkali-activated binder-treated jute geotextile as reinforcement for subgrade stabilization vol.15, pp.3, 2021, https://doi.org/10.1080/19386362.2018.1464272
  11. Performance Evaluation of Lime, Cement and Alkali-Activated Binder in Fiber-Reinforced Expansive Subgrade Soil: A Comparative Study vol.51, pp.1, 2014, https://doi.org/10.1520/jte20210054
  12. Experimental investigations on the structural behaviour of reinforced geopolymer beams produced from recycled construction materials vol.41, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.102776
  13. Life cycle assessment and cost analysis of fly ash–rice husk ash blended alkali-activated concrete vol.295, pp.None, 2014, https://doi.org/10.1016/j.jenvman.2021.113140
  14. Experimental Investigations on Strength and Durability of Alkali-Activated Binder-Treated Natural Jute Geotextile vol.7, pp.4, 2014, https://doi.org/10.1007/s40891-021-00341-3