DOI QR코드

DOI QR Code

Traveling Performance of a Robot Platform for Unmanned Weeding in a Dry Field

벼농사용 무인 제초로봇의 건답환경 주행 성능

  • Kim, Gook-Hwan (Department of Agriculture Engineering, National Academy of Agricultural Science, RDA) ;
  • Kim, Sang-Cheol (Department of Agriculture Engineering, National Academy of Agricultural Science, RDA) ;
  • Hong, Young-Ki (Department of Agriculture Engineering, National Academy of Agricultural Science, RDA)
  • 김국환 (농촌진흥청 국립농업과학원 농업공학부) ;
  • 김상철 (농촌진흥청 국립농업과학원 농업공학부) ;
  • 홍영기 (농촌진흥청 국립농업과학원 농업공학부)
  • Received : 2013.08.06
  • Accepted : 2013.12.11
  • Published : 2014.01.01

Abstract

This paper introduces a robot platform which can do weeding while traveling between rice seedlings stably against irregular land surface of a paddy field. Also, an autonomous navigation technique that can track on stable state without any damage of the seedlings in the working area is proposed. Detection of the rice seedlings and avoidance knocking down by the robot platform is achieved by the sensor fusion of a laser range finder (LRF) and an inertial measurement unit (IMU). These sensors are also used to control navigating direction of the robot to keep going along the column of rice seedling consistently. Deviation of the robot direction from the rice column that is sensed by the LRF is fed back to a proportional and derivative controller to obtain stable adjustment of navigating direction and get proper returning speed of the robot to the rice column.

Keywords

References

  1. Watchareeruetai, U., Takeuchi, Y., Matsumoto, T., Kudo, H., and Ohnishi, N., "Computer Vision Based Methods for Detecting Weeds in Lawns," Proc. of IEEE Conference on Cybernetics and Intelligent Systems, pp. 1-6, 2006.
  2. Chen, B., Tojo, S., and Watanabe, K., "Machine Vision for a Micro Weeding Robot in a Paddy Field," Biosystems Engineering, Vol. 85, No. 4, pp. 393-404, 2003. https://doi.org/10.1016/S1537-5110(03)00078-3
  3. Jung, B., Yeo, I., and Cho, C., "Autonomous Traveling of Unmanned Golf-Car using GPS and Vision System," J. Korean Soc. Precis. Eng., Vol. 26, No. 6, pp. 74-80, 2009.
  4. Jiang, G., Ke, X., Du, S., and Chen, J., "A Straight Line Detection Based on Randomized Method," Proc. of 9th International Conference on SIGNAL PROCESSING PROCEEDINGS, pp. 1149-1152, 2008.
  5. Igawa, H., Tanaka, T., Kaneko, S., Tada, T., and Suzuki, S., "Visual and Tactual Recognition of Trunk of Grape for Weeding Robot in Vineyards," Proc, of IECON 09, pp. 4274-4279, 2009.
  6. Hemming, J. and Rath, T., "Computer-vision-based Weed Identification under Field Conditions using Controlled Lighting," Journal of Agricultural Engineering Research, Vol. 78, No. 3, pp. 233-244, 2001. https://doi.org/10.1006/jaer.2000.0639
  7. Lee, W., Slaughter, D., and Giles, D., "Robotic Weed Control System for Tomatoes," Precision Agriculture, Vol. 1, No. 1, pp. 95-113, 1999. https://doi.org/10.1023/A:1009977903204
  8. Jiang, G., Zhao, C., and Si, Y., "A Machine Vision Based Crop Rows Detection for Agricultural Robots," Proc. of International Conference on Wavelet Analysis and Pattern Recognition, pp. 114-118, 2010.
  9. Furgale, P. and Barfoot, T., "Stereo Mapping and Localization for Long-range Path Following on Rough Terrain," Proc. of IEEE International Conference on Robotics and Automation, pp. 4410-4416, 2010.
  10. Zhao, H., Liu, Y., Zhu, X., Zhao, Y., and Zha, H., "Scene Understanding in a Large Dynamic Environment through a Laser-based Sensing," Proc. of IEEE International Conference on Robotics and Automation, pp. 127-133, 2010.
  11. Ryo, T., Noboru, N., and Akira, M., "Automatic Guidance with a Laser Scanner for a Robot Tractor in an Orchard," Proc. of the International Conference on Automation Technology for Off-road Equipment, pp. 369-373, 2004.
  12. Subramanian, V., Burks, T., and Arroyo, A., "Development of Machine Vision and Laser Radar Based Autonomous Vehicle Guidance Systems for Citrus Grove Navigation," Journal of Computers and Electronics in Agriculture, Vol. 53, No. 2, pp. 130-143, 2006. https://doi.org/10.1016/j.compag.2006.06.001