참고문헌
- Chopra, O. K. and Shack, W. J., 2006, Effect of LWR Coolant Environments on the Fatigue Life of Reactor Materials, NUREG/CR-6909, Argon National Laboratory.
-
Higuchi, M., Sakaguchi, K., Nomura, Y. and Hirano, A., 2007, "Final Proposal of Environmental Fatigue Life Correction Factor (
$F_{en}$ ) for Structural Materials in LWR Water Environment," Proc. of Pressure Vessel & Piping, ASME, Texas, USA, PVP2007-26100. -
Cho, H., Kim, B. K., Kim, I. S., Jang, C. and Jung, D. Y., 2007, "Fatigue Life and Crack Growth Mechanisms of the Type 316LN Austenitic Stainless Steel in
$310^{\circ}C$ Deoxygenated Water," J. of Nucl. Sci. & Technol., Vol. 44, pp. 1007-1014. https://doi.org/10.1080/18811248.2007.9711340 -
Cho, H., Kim, B. K., Kim, I. S. and Jang, C., 2008, "Low Cycle Fatigue Behaviors of Type 316LN Austenitic Stainless Steel in
$310^{\circ}C$ Deaerated Water - Fatigue Life and Dislocation Structure Development," Mater. Sci. & Eng. A, Vol. 476, pp. 248-256. https://doi.org/10.1016/j.msea.2007.07.023 - Chopra, O. K. and Shack, W. J., 2002, Mechanism and Estimation of Fatigue Crack Initiation in Austenitic Stainless Steels in LWR Environments, NUREG/CR-6787, Argon National Laboratory.
- Jang, C., Cho, P. Y., Kim, M. Oh, S. J. and Yang, J. S., 2010, "Effects of Microstructure and Residual Stress on Fatigue Crack Growth of Stainless Steel Narrow Gap Welds," Mater. & Des., Vol. 31, pp. 1862-1870. https://doi.org/10.1016/j.matdes.2009.10.062
- Stolarz, J. and Foct, J., 2001, "Specific Features of Two Phase Alloys Response to Cyclic Deformation," Mater. Sci. & Eng. A, Vol. 319, pp. 501-505.
- Zhao, Y. X., Gao, Q. and Wang, J. N., 1999, "Microstructural Effects on the Short Crack Behavior of a Stainless Steel Weld Metal during Low-Cycle Fatigue," Fatigue, Fracture of Eng. Mater. & Struct., Vol. 22, pp. 469-480. https://doi.org/10.1046/j.1460-2695.1999.00196.x
-
Rho, B. S., Hong, H. U. and Nam, S. W., 2000, "The Effect of
${\delta}$ -Ferrite on Fatigue Cracks in 304L Steels," Int. J. of Fatigue, Vol. 22, pp. 683-690. https://doi.org/10.1016/S0142-1123(00)00043-8 - Mediratta, S. R., Ramaswamy, V. and Rama Rao, P., 1985, "Influence of Ferrite-Martensite Microstructural Morphology on the Low Cycle Fatigue of a Dual-Phase Steel," Int. J. of Fatigue, Vol. 7, pp. 107-115. https://doi.org/10.1016/0142-1123(85)90041-6
-
Jang, H., Kim, J. H., Jang, C., Lee, J. G. and Kim, T. S., 2013, "Low-cycle Fatigue Behaviors of Two heats of SA508 Gr.1a Low Alloy Steel in
$310^{\circ}C$ air and Deoxygenated Water - Effects of Dynamic Strain Aging and Microstructure," Submitted to Mater. Sci. & Eng. A. -
Cho, H., Kim, B. K., Kim, I. S., Oh, S. J., Jung, D. Y. and Byeon, S. C., 2005, "Environmental Fatigue Testing of Type 316 Stainless Steel in
$310^{\circ}C$ Water," Proc. of Pressure Vessel & Piping, ASME Colorado, USA, PVP2005-71493. -
Higuchi, M., Tsutsumi, K., Hirano, A. and Sakaguchi, K., 2003, "A Proposal of Fatigue Life Correction Factor
$F_{en}$ for Austenitic Stainless Steels in LWR Water Environments," J. of Pressure Vessel & Piping, Vol. 125, pp. 403-410. https://doi.org/10.1115/1.1613945 - Tsutsumi, K., Kanasaki, H., Umakoshi, T., Nakamura, T., Urata, S., Mizuta, H. and Nomoto, S., 2000, "Fatigue Life Reduction in PWR Water Environment for Stainless Steels," Proc. of Pressure Vessel & Piping, New York, USA, Vol. 410-2, pp. 23-34
- Chopra, O. K. and Shack, W. J., 2001, Environmental Effects on Fatigue Crack Initiation in Piping and Pressure Vessel Steels, NUREG/CR-6717, Argon National Laboratory.
-
Jang, H., Cho, H., Jang, C., Kim, T. S. and Moon, C. K., 2008, "Effect of Cyclic Strain Rate and Sulfides on Environmentally Assisted Cracking Behaviors of SA508 Gr.1a Low Alloy Steel in Deoxygenated Water at
$310^{\circ}C$ ," Nucl. Eng. Technol., Vol. 40, pp. 225-232. https://doi.org/10.5516/NET.2008.40.3.225 - Lynch, S. P., 2003, Mechanisms of Hydrogen Assisted Cracking - A Review, The Minerals, Metals & Materials Society (TMS), Warrendale, Pennsylvania, pp. 449-466.
- Murakami, Y. and Matsuoka, S, 2010, "Effect of Hydrogen on Fatigue Crack Growth of Metals," Eng. Fracture Mech., Vol. 77, pp. 1926-1940. https://doi.org/10.1016/j.engfracmech.2010.04.012
-
Gerland, M., Alain, R., Ait Saadi, B. and Mendez, J., 1997, "Low Cycle Fatigue Behavior in Vaccum of a 316L-Type Austenitic Stainless Steel Between 20 and
$600^{\circ}C$ - Part II: Dislocation Structure Evolution and Correlation with Cyclic Behavior," Mater. Sci. & Eng. A, Vol. 229, pp. 68-86. https://doi.org/10.1016/S0921-5093(96)10560-8 - Mannan, S. L., 1993, "Role of Dynamic Strain Ageing in Low Cycle Fatigue," Bull. Mater. Sci., Vol. 16, No. 6, pp. 561-582. https://doi.org/10.1007/BF02757656
- Robertson, I. M., 1999, "The Effect of Hydrogen on Dislocation Dynamics," Eng. Fracture Mech., Vol. 64, pp. 649-673. https://doi.org/10.1016/S0013-7944(99)00094-6
- Hong, S. G., Lee, K. O. and Lee, S. B., 2005, "Dynamic Strain Aging Effect on the Fatigue Resistance of Type 316L Stainless Steel," Int. J. of Fatigue, Vol. 27, pp. 1420-1424. https://doi.org/10.1016/j.ijfatigue.2005.06.037