DOI QR코드

DOI QR Code

Al-Li 합금 윙립의 고속가공 변형특성에 관한 연구

A Study on High Speed Machining Distortion Characteristics of Aluminum Lithium Alloys Wing Rib

  • 이인수 (경남과학기술대학교 대학원 자동차공학과) ;
  • 김해지 (경남과학기술대학교 자동차공학과)
  • Lee, In-Su (School of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kim, Hae-Ji (Dept, of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 투고 : 2014.11.19
  • 심사 : 2014.12.10
  • 발행 : 2014.12.31

초록

Aluminum lithium alloys are new materials developed for lightweight aircraft parts. However, as compared with conventional aluminum alloys in high-speed machining, problems such as tool wear, machining distortion, and cutting ability arise. This study presents the machining distortion characteristics of an Al-Li alloy wing tip in relation to the cutting heat in high-speed machining. A machining experiment was conducted with high-speed machining equipment for an evaluation of the machining distortion characteristics, with each machining stage temperature change of the workpiece machining surface, and the inside and outside temperature changes of the equipment measured. By measuring the amount of distortion of the workpiece before and after machining, the cutting heat was analyzed with regard to its effect on machining distortion in the product.

키워드

참고문헌

  1. B. Ahmed, S. J. Wu, "Aluminum Lithium Alloys(Al-Li-Cu-X)-New Generation Material for Aerospace Applications", Applied Mechanics and Materials, Vol. 440, pp. 104-111, 2013. https://doi.org/10.4028/www.scientific.net/AMM.440.104
  2. Ph. Lequed, K. P. Smith, A. Danelou, "Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate", Journal of Materials Engineering and Performance, Vol. 19, No. 6, pp. 841-847, 2010 https://doi.org/10.1007/s11665-009-9554-z
  3. C. Giummarr, B. Thomas, R. J. Rioja, "New Aluminum Lithium alloys for aerospace applications", Proceedings fo the Light Metals Technology Conference, pp. 395-396, 2007.
  4. U. M. Lee, N. K. Kim, J. H. Jang, Yulkok Ltd, "A Study on th High Speed Machining of Major Structure in Aircraft", Journal of the KSMPE, Vol. 11, No. 1, pp. 119-124, 2012.
  5. U. M. Lee, N. K. Kim, H. J. Kim, I. S. Lee, "A Study on Machining distortion of MAJOR Structure in Aircraft" 2009 Fall Conference Proceeding of the KSMPE, pp. 17-19, 2009.
  6. S. J. Lee, W. K, Park, S. T. Lee, W. Y. Lee, M. K. Ha, "Characteristics of Heat Generation in time of High-speed Machining using Infrared Thermal Imaging Camera", Journal of the KSMPE, Vol. 2, No. 3, pp. 26-33, 2003.