마이크로전자및패키징학회지 (Journal of the Microelectronics and Packaging Society)

  • 제21권4호
  • /
  • Pages.105-110
  • /
  • 2014
  • /
  • 1226-9360(pISSN)
  • /
  • 2287-7525(eISSN)
한국마이크로전자및패키징학회 (The Korean Microelectronics and Packaging Society)
권호 표지
DOI QR코드

DOI QR Code

유기 패시베이션 박막이 P3HT:PC61BM 활성층을 갖는 고분자 태양전지의 특성에 미치는 영향

Effects of Organic Passivation Films on Properties of Polymer Solar Cells with P3HT:PC61BM Active Layers

  • 이상희 (단국대학교 전자전기공학과) ;
  • 박병민 (단국대학교 전자전기공학과) ;
  • 조양근 (단국대학교 전자전기공학과) ;
  • 장호정 (단국대학교 전자전기공학과) ;
  • 정재진 (단국대학교 응용컴퓨터공학과) ;
  • 피재호 (단국대학교 분자생물학과)
  • Lee, Sang Hee (Department of Electronics and Electrical Engineering, Dankook University) ;
  • Park, Byung Min (Department of Electronics and Electrical Engineering, Dankook University) ;
  • Cho, Yang Keun (Department of Electronics and Electrical Engineering, Dankook University) ;
  • Chang, Ho Jung (Department of Electronics and Electrical Engineering, Dankook University) ;
  • Jung, Jae Jin (Department of Applied Computer Engineering, Dankook University) ;
  • Pyee, Jaeho (Department of Molecular Biology, Dankook University)
  • 투고 : 2014.12.09
  • 심사 : 2014.12.29
  • 발행 : 2014.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

재생에너지 광소자로서 스마트 농장 등의 에너지원으로서 고분자 태양전지의 응용이 기대되며 향후 상업화를 위해 효율과 신뢰성 개선이 요구된다. 본 연구에서는 유기 패시베이션 박막을 가지는 헤테로정션 고분자태 전지를 제작하고, 패시베이션 박막이 고분자 태양전지의 특성에 미치는 영향을 조사하였다. 사용된 패시베이션 유기재료로는 폴리비닐알코올과 이크롬산 암모늄을 혼합하여 용해한 후 스핀코팅방법으로 P3HT:$PC_{61}BM$/LiF/Al 기판위에 코팅하여 소자를 제작하였다. 제작된 소자구조는 glass/ITO/PEDOT:PSS/P3HT:$PC_{61}BM$/LiF/Al/passivation layer 이며, 140시간 공기 중에 노출 후 전기적 특성을 측정, 비교한 결과, 패시베이션 처리된 고분자 태양전지가 패시베이션 박막 처리되지 않은 소자에 비해 보다 우수한 전기적 특성을 보여주었다. 즉, 패시베이션 처리된 소자의 전력변환효율은 제작직후 3.0%에서 140시간 노출 후 1.3%로 감소한 반면 패시베이션 처리되지 않은 소자의 경우는 동일한 노출조건에서 3.5%에서 0.1%로 급격한 특성저하를 나타내었다.

It is required to improve the efficiency and the reliability of the polymer solar cells (PSCs) as the energy saving optical device for the future application of the smart farm facilities. In this study, we fabricated the bulk hetero junction PSCs with organic passivation film layer for the reliability improvement of the devices. The effects of the passivation layer on the electrical properties of the PSCs were studied. The materials of passivation layer are composed of poly vinyl alcohol (PVA) and ammonium dichromate, and the passivation films were fabricated by the spin coating method on the P3HT:$PC_{61}BM$/LiF/Al substrate. The prepared structure of the device is the glass/ITO/PEDOT:PSS/P3HT:$PC_{61}BM$/LiF/Al/passivation layer. The performances of the PSCs with the organic passivation film showed better electrical properties compared with the PSCs without passivation layers. The power conversion efficiency (PCE) values of passivated PSCs decreased from 3.0 to 1.3% after air exposure for 140 hrs. In contrast, the PCE values for the devices without passivation decreased sharply from 3.5 to 0.1% under the same exposure condition.

키워드

참고문헌

  1. B. S. Ong, Y. Wu and P. Liu, "Design of high-performance regioregular polythiophenees for organic thin-film transistors", Proceedings of the IEEE, 93, 8 (2005).
  2. D. Li, E. J. Vorkent, R. Nortrup, H. S. Moon, H. Katz and Z. bao, "Humidity effect on electrical performance of organic thin-film transistors", Appl. phys. Lett., 86, 042105 (2005). https://doi.org/10.1063/1.1852708
  3. Y. Qiu, Y. Hu, G. dong, L. Wang, J. Xie and Y. Ma, "High-mobility thin-film transistors based on aligned carbon nanotubes", Appl. Phys. Lett., 83, 1644 (2003). https://doi.org/10.1063/1.1604193
  4. R. Ye, M, Baba, K. Suzuki, Y. Ohishi and K. Mori, "Effects of $O_2$ and $H_2O$ on electrical characteristics of pentacene thin film transistors", Thin Solid Films, 464, 437 (2004).
  5. D. H. Nam, K. D. Park, J. H. Park and K. Y. Han, "Simultaneous patterning and passivation of P3HT-OTFTs with photosensitive poly vinyl-alcohol(PVA) layer", J. KIEEME, 21(5), 426 (2008). https://doi.org/10.4313/JKEM.2008.21.5.426
  6. J. H. Schon, "On the stability of organic field-effect transistor materials", Applied Physics Letters, 79(25), 4163 (2001). https://doi.org/10.1063/1.1421230
  7. M. G. Kane, J. Campi, M. S. Hammond and F. P. Cuomo, "Analog and digital circuit using organic thin-film transistors on polyester substrates", IEEE Electron Device Letters, 21(11), 534 (2000). https://doi.org/10.1109/55.877202
  8. K. H. Kim, S. C. Gong and H. J. Chang, "Effects of anode buffer layers on the properties of organic solar cells", Thin Solid Films, 521, 69 (2012). https://doi.org/10.1016/j.tsf.2012.03.069
  9. S. K. Jang, S. C. Gong and H. J. Chang, "Effects of various solvent addition on crystal and electrical properties of organic solar cells with P3HT:PCBM active layer", Synth. Met., 162, 426 (2012). https://doi.org/10.1016/j.synthmet.2012.01.008
  10. S. H. Kim, J. Y. Choi and H. J. Chang, "Fabrication and Characterization of Organic Solar Cells with Gold Nanoparticles in PEDOT:PSS Hole Transport Layer", J. Microelectron. Packag. Soc., 20(2), 39 (2013). https://doi.org/10.6117/kmeps.2013.20.2.039

피인용 문헌

  1. Effects of Passivation Thin Films on the Optical Properties of the Green Organic Light Emitting Diodes vol.23, pp.1, 2016, https://doi.org/10.6117/kmeps.2016.23.1.011
  2. Effects of Passivation Thin Films by Spray Coatings on Properties of Flexible CIGS Solar Cells vol.23, pp.3, 2016, https://doi.org/10.6117/kmeps.2016.23.3.057
  3. 연성 플라스틱 기판위에 스프레이 코팅방법으로 제조한 유·무기 보호막의 특성 vol.24, pp.4, 2014, https://doi.org/10.6117/kmeps.2017.24.4.079