Earthquakes and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear seismic damage control of steel frame-steel plate shear wall structures using MR dampers

  • Xu, Longhe (School of Civil Engineering, Beijing Jiaotong University) ;
  • Li, Zhongxian (School of Civil Engineering, Tianjin University) ;
  • Lv, Yang (School of Civil Engineering, Tianjin University)
  • Received : 2014.04.20
  • Accepted : 2014.05.07
  • Published : 2014.12.25
⟨ Previous Next ⟩

Abstract

A semi-active control platform comprising the mechanical model of magnetorheological (MR) dampers, the bang-bang control law and damage material models is developed, and the simulation method of steel plate shear wall (SPSW) and optimization method for capacity design of MR dampers are proposed. A 15-story steel frame-SPSW structure is analyzed to evaluate the seismic performance of nonlinear semi-active controlled structures with optimal designed MR dampers, results indicate that the control platform and simulation method are stable and fast, and the damage accumulation effects of uncontrolled structure are largely reduced, and the seismic performance of controlled structures has been improved.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Berman, J.W. (2011), "Seismic behavior of code designed steel plate shear walls", Eng. Struct., 33(1), 230-244. https://doi.org/10.1016/j.engstruct.2010.10.015
  2. Bonora, N. (1997), "A nonlinear CDM model for ductile failure", Eng. Fract. Mech., 58, 11-28. https://doi.org/10.1016/S0013-7944(97)00074-X
  3. Dyke, S.J., Spencer Jr., B.F. (1996), "Seismic response control using multiple MR dampers", Proceedings of the 2nd International Workshop on Structure Control, pp. 163-173, Hong Kong.
  4. Feng, Q. and Shinozuka, M. (1990), "Use of a variable damper for hybrid control of bridge response under earthquake", Proceedings of the US National Workshop on Structure Control Research, USC Publication No. CE-9013, pp. 107-112, Los Angeles, CA, USA.
  5. Foutch, D.A. and Yun, S.Y. (2002), "Modeling of steel moment frames for seismic loads", J. Constr. Steel Res., 58(5-8), 529-564. https://doi.org/10.1016/S0143-974X(01)00078-5
  6. Jansen, L.M. and Dyke, S.J. (2000), "Semiactive control strategies for MR dampers: comparative study", J. Eng. Mech.-ASCE, 2000, 126(8), 795-803. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:8(795)
  7. Johnson, E.A. and Erkus, B. (2007), "Dissipativity and performance analysis of smart dampers via LMI synthesis", Struct. Control Hlth., 14(3), 471-496. https://doi.org/10.1002/stc.169
  8. Kim, Y., Langari, R. and Hurlebaus, S. (2008), "Semiactive nonlinear control of a building with magnetorheological damper system", Mech. Syst. Signal Pr., 23(2), 300-315.
  9. Lee, D.Y. and Wereley, N.M. (2000), "Analysis of electro-and magnetorheological flow mode dampers using Herschel-Bulkley model", Processing of the SPIE, Smart Structures and Materials: Damping and Isolation, pp. 244-255, Newport Beach, CA, USA, March 6.
  10. Li, L., Song, G. and Ou, J.P. (2010), "A genetic algorithm-based two-phase design for optimal placement of semi-active dampers for nonlinear benchmark structure", J. Vib. Control, 16(9), 1379-1392. https://doi.org/10.1177/1077546309103277
  11. Li, Q.S., Liu, D.K., Leung, A.Y.T., Zhang, N., Luo, Q.Z. (2002), "A multilevel genetic algorithm for optimum design of structural control systems", Int. J. Numer. Meth. Eng., 55(7), 817-834. https://doi.org/10.1002/nme.522
  12. Lin, W., Li, Z.X. and Ding, Y. (2008), "Trust-region based instantaneous optimal semi-active control of long-span spatially extended structures with MRF-04K damper", Earthq. Eng. Eng. Vib., 7(4), 447-464. https://doi.org/10.1007/s11803-008-1002-9
  13. Liu, X., Begg, D.W., Mattravers, D.R. (1997), "Optimal topology/actuator placement design of structures using SA", J. Aerospace Eng.-ASCE, 10(3), 119-125. https://doi.org/10.1061/(ASCE)0893-1321(1997)10:3(119)
  14. Lu, Q., Peng, Z., Chu, F., Huang, J. (2003), "Design of fuzzy controller for smart structures using genetic algorithms", Smart Mater. Struct., 12(6), 979-986. https://doi.org/10.1088/0964-1726/12/6/016
  15. Ohtori, Y., Spencer, B.F., Jr. and Dyke, S.J. (2004), "Benchmark control problems for seismically excited nonlinear buildings", J. Eng. Mech.-ASCE, 130(4), 366-385. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(366)
  16. Pirondi, A., Bonora, N., Steglich, D., et al. (2006), "Simulation of failure under cyclic plastic loading by damage models", Int. J. Plasticity, 22 (11), 2146-2170. https://doi.org/10.1016/j.ijplas.2006.03.007
  17. Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  18. Thorburn, L.J., Kulak, G.L., Montgomery, C.J. (1983), "Analysis of steel plate shear walls", Structural Engineering Report No. 107, University of Alberta, Edmonton, Alberta.
  19. Wang, D.H. and Liao, W.H. (2005), "Modeling and control of magnetorheological fluid dampers using neural networks", Smart Mater. Struct., 14(1), 111-126. https://doi.org/10.1088/0964-1726/14/1/011
  20. Wongprasert, N., Symans, M.D. (2004), "Application of a genetic algorithm for optimal damper distribution within the nonlinear seismic benchmark building", J. Eng. Mech.-ASCE, 130(4), 401-406. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(401)
  21. Xu, L.H. and Li, Z.X. (2008), "Semiactive multi-step predictive control of structures using MR dampers", Earthq. Eng. Struct. D., 37(12), 1435-1448. https://doi.org/10.1002/eqe.822
  22. Xu, L.H. and Li, Z.X. (2011), "Model predictive control strategies for protection of structures during earthquakes", Struct. Eng. Mech., 40(2), 233-243. https://doi.org/10.12989/sem.2011.40.2.233
  23. Yoshida, O. and Dyke, S.J. (2004), "Seismic control of a nonlinear benchmark building using smart dampers", J. Eng. Mech.-ASCE, 130(4), 386-392. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(386)

Cited by

  1. Hysteretic behavior studies of self-centering energy dissipation bracing system vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1205
  2. Seismic failure mode identification and multi-objective optimization for steel frame structure vol.21, pp.13, 2018, https://doi.org/10.1177/1369433218764619
  3. Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test vol.65, pp.5, 2018, https://doi.org/10.12989/sem.2018.65.5.547
  4. Experimental study on hysteretic behavior of steel moment frame equipped with elliptical brace vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.891
  5. Research on vibration reduction of high-rise RC frame-shear wall structure controlled by magnetorheological dampers vol.61, pp.4, 2014, https://doi.org/10.1016/j.aej.2021.08.021