Ocean Systems Engineering

  • 제4권4호
  • /
  • Pages.263-278
  • /
  • 2014
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of plate slope and water jetting on the penetration depth of a jack-up spud-can for surficial sands

  • Han, Dong-Seop (Research Institute of Green Energy Equipment, Dong-A University) ;
  • Kim, Seung-Jun (Coastal and Ocean Engineering Division, Zachry Department of Civil Engineering, Texas A&M University) ;
  • Kim, Moo-Hyun (Coastal and Ocean Engineering Division, Zachry Department of Civil Engineering, Texas A&M University)
  • 투고 : 2014.05.30
  • 심사 : 2014.12.03
  • 발행 : 2014.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The spudcan requires the suitable design considering the soil, platform, and environmental conditions. Its shape needs to be designed to secure sufficient reaction of soil so that it can prevent overturning accidents. Its shape also has to minimize the installation and extraction time. Even in the same soil condition, the reaction of soil may be different depending on the shape of spud can, mainly the slope of top and bottom plates. Therefore, in this study, the relation between the slope of plates and the reaction of soil with and without water jetting is analyzed to better understand their interactions and correlations. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the Gulf of Mexico is considered as the target site. A multi layered (sand overlying two clays) soil profile is applied as the assumed soil condition and the soil-structure interaction (SSI) analysis is performed by using ANSYS to analyze the effect of the slope change of the bottom plate and water jetting on the reaction of soil. This kind of investigation and simulation is needed to develop optimal and smart spudcan with water-jetting control in the future.

키워드

과제정보

연구 과제 주관 기관 : Korea Ministry of Science, ICT and Future Planning

참고문헌

  1. American Petroleum Institute (2007), API BULLETIN 2INT-MET Interim Guidance on Hurricane Conditions in the Gulf of Mexico, Washington, D. C., U.S.A.
  2. ANSYS, Inc. (2012), ANSYS Mechanical APDL Material Reference.
  3. Det Norske Veritas AS (2012), Self-elevating Units.
  4. Duan, M., Zhao, J., Wang, J. and Song, L. (2013), "Jetting effect of jackup on actively punching through overlaid sand layer", Int. J. Offshore Polar., 23(1), 55-62.
  5. Kai, S.U. and Yin, L.I. (2009), "Discussion of extended drucker-prager yield criterion in slope stability analysis", Proceedings of the Power and Energy Engineering Conference, 2009 APPEEC.
  6. Kang, H.Y. and Kim, M.H. (2012), "Hydrodynamic interactions and coupled dynamics between a container ship and multiple mobile harbors", Ocean Syst. Eng., 2(3), 217-228. https://doi.org/10.12989/ose.2012.2.3.217
  7. Kim, M.H. and Chen, W. (1994), "Slender body approximation for slowly-varying wave loads in multi-directional waves", Appl. Ocean Res., 16(3), 141-163. https://doi.org/10.1016/0141-1187(94)90025-6
  8. Kim, M.H. and Ran, Z. (1994), "Responses of an articulated tower in waves and currents", Int. J. Offshore Polar., 4(4), 298-391.
  9. Kellezi, L. and Stromann, H. (2003), "FEM analysis of jack-up spudcan penetration for multi-layered critical soil conditions", Proceeding of BGA International Conference on Foundations.
  10. Han, D.S., Kim, S.J., Kim, M.H. and Park, Y.C. (2014), "Relation between slope of plate and reaction of soil in a spudcan for jack-up platform", Proceedings of the International Offshore and Polar Engineering
  11. Qiu, G. and Grabe, J. (2012), "Numerical investigation of bearing capacity due to spudcan penetration in sand overlying clay", Can. Geotech. J., 49, 1393-1407. https://doi.org/10.1139/t2012-085
  12. Tho, K.K., Leung, C.F., Chow, Y.K. and Swaddiwudhipong, S. (2012), "Eulerian finite-element technique for analysis of jack-up spudcan penetration", Int. J. Geomech. - ASCE, 12(1), 64-73. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000111
  13. Yang, C.K. and Kim, M.H. (2011), "The structural safety assessment of a tie-down system on a tension leg platform during Hurricane events", Ocean Syst. Eng., 1(4), 263-283. https://doi.org/10.12989/ose.2011.1.4.263
  14. Yu, L., Hu, Y., Liu, J., Randolph F.M. and Kong, X. (2012), "Numerical study of spudcan penetration in loose sand overlying clay", J. Comput. Geotech., 46, 1-12. https://doi.org/10.1016/j.compgeo.2012.05.012
  15. Zhao, J., Duan, M., Cao, S., Hu, Z. and Song, L. (2011), "Prediction of spudcan penetration depth in multiple layers with sand overlying clay", J. Appl. Mech. Mater., 52-54, 995-1002. https://doi.org/10.4028/www.scientific.net/AMM.52-54.995

피인용 문헌

  1. Effect of water jetting on soil properties and spud-can penetration/extraction in various soil conditions: numerical simulation vs. physical model test vol.13, pp.3, 2018, https://doi.org/10.1080/17445302.2017.1368123
  2. Shape Optimization of a Hole for Water Jetting in a Spudcan for a Jack-up Rig vol.40, pp.4, 2016, https://doi.org/10.3795/KSME-A.2016.40.4.337
  3. Effect of water jetting parameters on the penetration behavior of jack-up spudcan in surficial sand condition vol.5, pp.1, 2015, https://doi.org/10.12989/ose.2015.5.1.001
  4. Spud-can penetration depending on soil properties: Comparison between numerical simulation and physical model test vol.7, pp.2, 2014, https://doi.org/10.12989/ose.2017.7.2.107