Steel and Composite Structures

  • 제17권6호
  • /
  • Pages.777-790
  • /
  • 2014
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental study on infilled frames strengthened by profiled steel sheet bracing

  • Cao, Pingzhou (College of Civil and Transportation Engineering, Hohai University) ;
  • Feng, Ningning (College of Civil and Transportation Engineering, Hohai University) ;
  • Wu, Kai (College of Civil and Transportation Engineering, Hohai University)
  • 투고 : 2014.01.15
  • 심사 : 2014.04.28
  • 발행 : 2014.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study is to investigate the seismic performance of reinforced concrete (RC) frames strengthened by profiled steel sheet bracing which takes the influence of infill walls into consideration. One-bay, two-story, 1/3 scale two specimens shared same feature of dimensions, one specimen consists only beams and columns; the other one is reinforced by profiled steel sheet bracing with infill walls. Hysteretic curves, envelope curves, stiffness degradation curves and energy dissipation capacities are presented based on test data. Test results indicate that the ultimate load of strengthened specimen has been improved by 225%. The stiffness of reinforced by profiled steel sheet bracing has been increased by 108%. This demonstrates that infill walls and profiled steel sheet bracing enhanced the strength and stiffness distinctly. Energy dissipation has an obvious increase after 12 cycles. This shows that the reinforced specimen is able to bear the lateral load effectively and absorb lots of seismic energy.

키워드

참고문헌

  1. Ahmed, E. and Badaruzzaman, W.H.W. (2013), "Vibration performance of profiled steel sheet dry board composite floor panel", KSCE J. Civil Eng., 17(1), 133-138. https://doi.org/10.1007/s12205-013-1114-2
  2. Altin, S., Anil, O., Kara, M.E. and Kaya, M. (2008), "An experimental study on two different strengthening techniques for RC frames", J. Compos. Part B, 39(4), 680-693. https://doi.org/10.1016/j.compositesb.2007.06.001
  3. Badoux, M. and Jirsa, J.O. (1990), "Steel bracing of RC frames for seismic retrofitting", J. Struct. Eng., 116(1), 55-74. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(55)
  4. Bush, T.D., Jones, E.A. and Jirsa, J.O. (1991), "Behavior of RC frame strengthened using structural steel bracing", J. Struct. Eng., 117(4), 1115-1126. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:4(1115)
  5. Chen, S.M. (2002), "Study of load-carrying capacities of 3W-DECK composite slabs", J. Build. Struct., 23(3), 19-26.
  6. Design Code (1997), Specificating of Testing Methods for Earthquake Resistant Building, JGJ 101-96, Beijing, China.
  7. Design Code (2003), Test Methods for Wall Bricks, GB/T 2542-2003, Beijing, China.
  8. Design Code (2010), Code for Design of Concrete Structures, JB 50010-2010, Beijing, China.
  9. Erdem, I., Akyuz, U., Ersoy, U. and Ozcebe, G. (2006), "An experimental study on two different strengthening techniques for RC frames", Eng. Struct., 28(13), 1843-1851. https://doi.org/10.1016/j.engstruct.2006.03.010
  10. Fell, B.V., Kanvinde, A.M., Deierlein, G.G. and Myers, A.T. (2009), "Experimental investigation of inelastic cyclic buckling and fracture of steel braces", J. Struct. Eng., 135(1), 19-32. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:1(19)
  11. Guo, R. and Zhao, S.W. (2012), "Experimental study on seismic performance of combination strengthening RC frame", Earthq. Resist. Eng. Retrofit., 34(5), 34-39.
  12. Li, Y.S., Shan, W., Huang, Z.b., Ge, B.D. and Wu, Y. (2008), "Experimental study on mechanical behavior of profiled steel sheet-bamboo plywood composite slabs", J. Build. Struct., 29(1), 96-102.
  13. Maheri, M.R. and Hadjipour, A. (2003), "Experimental investigation and design of steel brace connection to RC frame", Eng. Struct., 25(13), 1707-1714. https://doi.org/10.1016/S0141-0296(03)00162-7
  14. Nie, J.G. and Yi, W.H. (2005), "Bearing capacity and calculation method of profiled steel sheeting-concrete composite slabs", Build. Struct., 35(1), 49-52.
  15. Tzaros, K.A., Mistakidis, E.S., and Perdikaris, P.C. (2010), "A numerical model based on nonconvexnonsmooth optimization for the simulation of bending tests on composite slabs with profiled steel sheeting", Eng. Struct., 32(3), 843-853. https://doi.org/10.1016/j.engstruct.2009.12.010
  16. Wang, S.G., Lan, Z.J. and Lan, Z.J. (1998), "Behavior of reinforced concrete frame with energy-dissipation bracings under reversed cyclic loads", Earthq. Eng. Eng. Vib., 18(3), 124-130.
  17. Yu, H.F. (2009), "Aseismic performance of welded I-section steel bracings and concentrically braced steel frames", Ph.D. Dissertation, Harbin Institute of Technology, Harbin, China.
  18. Zhao, B.C., Yu, A.L., Jiang, S.C. and Wang, J.L. (2013), "Experimental investigation of Y-eccentrically steel braced RC frames energy-dissipation", Earthq. Eng. Eng. Vib., 33(1), 47-53.
  19. Zhu, B.L. (1989), Structural Seismic Test, Seismological Press, Beijing, China.
  20. Zhu, J.T., Wang, X.L., Xu, Z.D. and Weng, C.H. (2011), "Experimental study on seismic behavior of RC frames strengthened with CFRP sheets", Compos. Struct., 93(6), 1595-1603. https://doi.org/10.1016/j.compstruct.2011.01.007

피인용 문헌

  1. Nonlinear behavior of connections in RCS frames with bracing and steel plate shear wall vol.22, pp.4, 2016, https://doi.org/10.12989/scs.2016.22.4.915
  2. An investigation of anchorage to the edge of steel plates bonded to RC structures vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.025
  3. A state-of-the-art review on double-skinned composite wall systems vol.97, 2015, https://doi.org/10.1016/j.tws.2015.09.007
  4. Seismic behavior of steel frames with replaceable reinforced concrete wall panels vol.22, pp.5, 2014, https://doi.org/10.12989/scs.2016.22.5.1055
  5. Predicting the stiffness of shear diaphragm panels composed of bridge metal deck forms vol.24, pp.2, 2014, https://doi.org/10.12989/scs.2017.24.2.213
  6. Simulations of corrugated steel bracing reinforing infilled RC frame: influence factors vol.525, pp.None, 2014, https://doi.org/10.1088/1755-1315/525/1/012170
  7. Concrete-filled twin-layer steel-sheet CWs system: A systematic review of the literature vol.18, pp.6, 2014, https://doi.org/10.1590/1679-78256622