Computers and Concrete

  • 제14권6호
  • /
  • Pages.767-783
  • /
  • 2014
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Impact of composite materials on performance of reinforced concrete panels

  • Mazek, Sherif A. (Civil Engineering Department, Military Technical College) ;
  • Mostafa, Ashraf A. (Egyptian Engineering Department)
  • 투고 : 2014.04.30
  • 심사 : 2014.11.11
  • 발행 : 2014.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The use of composite materials to strengthen reinforced concrete (RC) structures against blast terror has great interests from engineering experts in structural retrofitting. The composite materials used in this study are rigid polyurethane foam (RPF) and aluminum foam (ALF). The aim of this study is to use the RPF and the ALF to strengthen the RC panels under blast load. The RC panel is considered to study the RPF and the ALF as structural retrofitting. Field blast test is conducted. The finite element analysis (FEA) is also used to model the RC panel under shock wave. The RC panel performance is studied based on detonating different TNT explosive charges. There is a good agreement between the results obtained by both the field blast test and the proposed numerical model. The composite materials improve the RC panel performance under the blast wave propagation.

키워드

참고문헌

  1. Aimone, C.T. (1982), "Three-dimensional wave propagation model of full-scale rock fragmentation", Ph.D. Thesis, Northwestern University.
  2. Baker, W.E., Cox, P.A., Kulesz, J.J. and Strehlow, R.A. (1983), "Explosion hazards and evaluation", Elsevier.
  3. Beshara, F.B.A. (1994), "Modeling of blast loading on aboveground structures -I. Internal blast and ground shock", Compos. Struct., 51(5).
  4. Chen, H. (Roger) and Chen S. (1996), "Dynamic responses of shallow-buried flexible plates subjected to impact loading", J. Struct. Eng., January 1996, 55-60.
  5. Dharmasena, K.P., Wadley H.N., Xue, Z., John, W. Hutchinson, J.W. (2008), "Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading", Int. J. Impact Eng., 35(2008) 1063-1074. https://doi.org/10.1016/j.ijimpeng.2007.06.008
  6. Fayad, H.M. (2009), The Optimum Design of the Tunnels Armoured Doors under Blast Effects, Ph. D. Thesis. Military Technical College (MTC). Cairo
  7. Gaissmaiere, A.E.W. (2003), "Aspects of thermobaric weapon", ADF Health, Vol. 4, pp. 3-6.
  8. Gustafsson, R. (1973), Swedish Blasting Technique, Gothenburg, Sweden, SPI.
  9. Ha, J., Yi N., Choi, J. and Kim, J. (2011), "Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading", J. Compos. Struct., 93, 2070-2082. https://doi.org/10.1016/j.compstruct.2011.02.014
  10. Hao, H., Ma, G.W. and Zhou, Y.X. (1998), "Numerical simulation of underground explosions", Fragblast the Int. J. Blasting Fragment., 2, 383-395.
  11. Laine L. and Hedman O. (1999), Finite Element Calculation of Swedish Rescue Centers (RC 90) and Shelters, 3rd Asia-Pacific Conference on Shock & Impact Loads on Structures, 205-212, November24-26, Singapore.
  12. Liu, L. and Katsabanis, P.D. (1997), "Development of a continuum damage model for blasting analysis", Int. J. Rock Mech. Min. Sci., 34, 217-231. https://doi.org/10.1016/S0148-9062(96)00041-1
  13. Lu, Y., Wang, Z., and Chong, K. (2005), A comparative study of buried structure in soil subjected to blast load using 2-D and 3-D numerical simulations, J. Soil Dyn. Earthq. Eng., 25. 275-288. https://doi.org/10.1016/j.soildyn.2005.02.007
  14. Luccioni, B., Ambrosini, D., Nurick, G. and Snyman, I. (2009), "Craters produced by underground explosions", J. Comput. Struct., 87, 1366-1373. https://doi.org/10.1016/j.compstruc.2009.06.002
  15. Mazek, S. and Mostafa, A. (2013), Impact of a shock wave on a structure strengthened by rigid polyurethane foam, J. Struct. Eng. Mech., 48(4)569-585.
  16. Mazek, S.A. (2014), "Performance of sandwich structure strengthened by pyramid cover under blast effect", J. Struct. Eng. Mech., 50(4), 471-486. https://doi.org/10.12989/sem.2014.50.4.471
  17. Ming, W.H. (2008), "Investigation on the blast resistance of a stiffened door structure", J. Marine Sci. Tech., 16(2), 149-157.
  18. Mohamad, L.S. (2006), Study and design of fortified structures due to blast effects. M.Sc thesis. Military Technical College (MTC). Cairo. Ammunition and Explosives. In document: AC/258-D/258, Brussels, Belgium.
  19. Remennikov, A. (2003), "A review of methods for predicting bomb blast effects on buildings", J. battlefield Tech., 6(3), 155- 161.
  20. Schueller, C.T. (1991), Structural Dynamics. Springer-Verlag, Berlin, New York, ISBN 0-387-53593-4.
  21. Smith, P.D. and Hetherington, J.G. (1994), Blast and ballistic loading of structures. Butterworth-Heinemann Ltd. UK.
  22. Technical Manual TM 5-885-1. 1986. Fundamentals of Protective Design for Conventional Weapons. Headquarters Department of the Army, Washington DC.
  23. Technical Manual TM 5-1300. 2008. Structures to Resist the Effects of Accidental Explosions. Unified Facilities Criteria (UFC) .U.S. Army Corps of Engineers; Naval Facilities Engineering Command; Air Force Civil Engineer Support Agency.
  24. Trelat, S., Sochet, I., Autrusson, B., Cheval, K. and Loiseau, O. (2007), "Impact of a shock wave on a structure on explosion at altitude", J. Loss Prevention on the Process Industries, 20, 509-516. https://doi.org/10.1016/j.jlp.2007.05.004
  25. Wu, C., Hao, H. and Zhou, Y.X. (1999), "Dynamic response analysis of rock mass with stochastic properties subjected to explosive loads", Fragblast the Int. J. Blasting Fragment., 3, 137-153.
  26. Zhang, W. and Valliappan, S. (1990), "Analysis of random anisotropic damage mechanics problems of rock mass, Part II: Statistical estimation", Rock Mech. Rock Eng., 23, 241-259. https://doi.org/10.1007/BF01043306

피인용 문헌

  1. Polypropylene fiber reinforced concrete plates under fluid impact. Part I: experiments vol.60, pp.2, 2016, https://doi.org/10.12989/sem.2016.60.2.211
  2. Numerical study of steel sandwich plates with RPF and VR cores materials under free air blast loads vol.27, pp.6, 2014, https://doi.org/10.12989/scs.2018.27.6.717