Computers and Concrete

  • 제14권6호
  • /
  • Pages.695-710
  • /
  • 2014
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A nonlinear model for ultimate analysis and design of reinforced concrete structures

  • Morfidis, Konstantinos (Institute of Engineering Seismology and Earthquake Engineering (EPPO-ITSAK)) ;
  • Kiousis, Panos D. (Colorado School of Mines, Department of Civil and Environmental Engineering) ;
  • Xenidis, Hariton (Department of Civil Engineering, Aristotle University of Thessaloniki, Aristotle University campus)
  • 투고 : 2014.03.15
  • 심사 : 2014.07.25
  • 발행 : 2014.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a theoretical and computational approach to solve inelastic structures subjected to overloads. Current practice in structural design is based on elastic analysis followed by limit strength design. Whereas this approach typically results in safe strength design, it does not always guarantee satisfactory performance at the service level because the internal stiffness distribution of the structure changes from the service to the ultimate strength state. A significant variation of relative stiffnesses between the two states may result in unwanted cracking at the service level with expensive repairs, while, under certain circumstances, early failure may occur due to unexpected internal moment reversals. To address these concerns, a new inelastic model is presented here that is based on the nonlinear material response and the interaction relation between axial forces and bending moments of a beam-column element. The model is simple, reasonably accurate, and computationally efficient. It is easy to implement in standard structural analysis codes, and avoids the complexities of expensive alternative analyses based on 2D and 3D finite-element computations using solid elements.

키워드

참고문헌

  1. Bouchaboub, M., Samai M.L. (2013), "Nonlinear analysis of slender high-strength R/C columns under combined biaxial bending and axial compression", Eng. Struct., 48, 37-42. https://doi.org/10.1016/j.engstruct.2012.08.030
  2. Comite Euro-International du Beton (CEB) (1993), "CEB-FIP model code 1990", CEB Bulletin d' Information 213-214, Thomas Telford Service Ltd., London, England.
  3. Cranston, W.B. (1965), Tests on Reinforced Concrete Frames 1: Pinned Portal Frames, Technical Report TRA/392, Cement and Concrete Association, London, England.
  4. El-Metwally, S.E., El-Shahha, A.M., and Chen, W.F. (1990), "3-D nonlinear analysis of r/c slender columns", Comput. Struct., 37(5), 863-872. https://doi.org/10.1016/0045-7949(90)90114-H
  5. Eurocode 2 (2004), Design of concrete structures - Part 1-1: General rules and rules for buildings, European Committee for Standardization, Brussels, Belgium.
  6. Eurocode 8 (2004), Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization, Brussels, Belgium.
  7. Fantilli, A.P., Mihashi, H. and Vallini, P. (2007), "Crack profile in RC, R/FRCC and R/HPFRCC members in tension", Mater. Struct., 40, 1099-1114. https://doi.org/10.1617/s11527-006-9208-7
  8. Gregori, J.N., Sosa, P.M., Prada, M.A.F. and Filippou, F.C. (2007), "A 3D numerical model for reinforced and prestressed concrete elements subjected to combined axial, bending, shear and torsion loading", Eng. Struct., 29(12), 3404-3419. https://doi.org/10.1016/j.engstruct.2007.09.001
  9. Hognestad, E., Hanson, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", J. Ame. Concrete Inst., Part 1, 27(4), 455-479.
  10. Hu, H.T., Lin, F.M. and Jan, Y.Y. (2004), "Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics", Compos. Struct., 63(3-4), 271-281. https://doi.org/10.1016/S0263-8223(03)00174-0
  11. Karabinis, A.I. and Kiousis, P.D. (2001), "Plasticity model for reinforced concrete elements subjected to overloads", ASCE J. Struct. Eng., 27(11), 1251-1256.
  12. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div., Proceeding of the American Society of Civil Engineers, 97(ST7), 1969-1990.
  13. King, W.S., White, D.W. and Chen, W.F. (1992), "Second-order inelastic analysis methods for steel-frame design", ASCE J. Struct. Eng., 18(2), 408-428.
  14. Koshikawa, T. (2013), "Modelling the postpeak stress-displacement relationship of concrete in uniaxial compression", VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, Van Mier, J.G.M, Ruiz, G. Andrade, C., Yu, R.C., and Zhang, X.X. (Eds), Toledo, Spain.
  15. Liew, J.Y.R. (1992), "Advanced analysis for frame design", Ph.D. Dissertation, West Lafayette: Purdue University.
  16. Nanakorn, P. (2004), "A two-dimensional beam-column finite element with embedded rotational discontinuities", Comput. Struct., 82, 753-762. https://doi.org/10.1016/j.compstruc.2004.02.008
  17. Powell, G.H. and Chen, P.F.S. (1986), "3D Beam-Column element with generalized plastic hinges", J. Eng. Mech., 112(7), 627-641. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:7(627)
  18. Sharma, R.M. (1990), "Ductility analysis of confined columns", J. Struct. Eng., 116(11), 3148-3161. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3148)
  19. Song, H.W., You, D.W., Byun, K.J. and Maekawa, K. (2002), "Finite element failure analysis of reinforced concrete T-girder bridges", Eng. Struct., 24(2), 151-162. https://doi.org/10.1016/S0141-0296(01)00107-9
  20. Spacone, E., Ciampi V. and Filippou, F.C. (1996), "Mixed Formulation of Nonlinear Beam Finite Element", Comput. Struct., 58(1), 71-83. https://doi.org/10.1016/0045-7949(95)00103-N
  21. Stevens, N.J., Uzumeri, S.M., Collins, M.P. and Will, G.T. (1991), "Constitutive model for reinforced concrete finite element analysis", ACI Struct. J., 88(1), 49-59.
  22. White, D.W. (1993), "Plastic hinge methods for advanced analysis of steel frames", Journal of Construct. Steel Res., 24(2), 121-152. https://doi.org/10.1016/0143-974X(93)90059-2
  23. Yuksel, E. and Karadogan, F. (2009), "Simplified calculation approach of load deformation relationships of a beam-column element", G. U. J. Sci., 22(4), 341-350.

피인용 문헌

  1. Using XFEM to model the effect of different axial compression on the hysteretic behaviour of the flexure-dominant RC columns 2018, https://doi.org/10.1002/tal.1465
  2. An algorithm to simulate the nonlinear behavior of RC 1D structural members under monotonic or cyclic combined loading vol.66, pp.3, 2014, https://doi.org/10.12989/sem.2018.66.3.305