참고문헌
- Barenblatt, G. I., 1962, "The Mathematical Theory of Equilibrium Cracks in Brittle Fracture", Adv in Appl Mech, Vol. 7, pp. 55-129. https://doi.org/10.1016/S0065-2156(08)70121-2
- Dugdale, D. S., 1960, "yielding of Steel Sheets Containing Slits", J Mech & Phys of Solids, Vol. 8, No. 2, pp. 100-104. https://doi.org/10.1016/0022-5096(60)90013-2
- Tvergaard, V., Hutchinson J. W., 1992, "The Relation between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids", J Mech & Phys of Solids, Vol. 40, pp. 1377-1397. https://doi.org/10.1016/0022-5096(92)90020-3
- Xu, X. P., and Needleman, A., 1994, "Numerical Simulations of Fast Crack Growth in Brittle Solids", J Mech & Phys of Solids, Vol. 42, pp. 1397-1434. https://doi.org/10.1016/0022-5096(94)90003-5
- Sukumar, N., Moes, M., Moran, B. and Belytschko, T., 2000, "Extended Finite Element Method for Three-dimensional Crack Modeling", Int J Num Meth in Eng, Vol. 48, No. 11, pp. 1549-1570. https://doi.org/10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A
- Moes, N. and Belytschko, T., 2002, "Extended Finite Element Method for Cohesive Crack Growth", Eng Frac Mech, Vol. 69, No. 7, pp.813-833. https://doi.org/10.1016/S0013-7944(01)00128-X
- Ji, H., Chopp, D., Dolbow, J. E., 2002, "A Hybrid Extended Finite Element/Level Set Method for Modeling Phase Transformations", Int J numer Mech Eng, Vol. 54, p. 1209-1233. https://doi.org/10.1002/nme.468
- Belytschko, T., Gracie, R., Ventura, Giulio., 2009, "A Review of Extended/Generalized Finite Element Methods for Material Modeling", Modeling & Simul in Mat Sci & Eng, Vol. 17, No. 4, pp. 1-31.
- Goldstein, R. V. and Salganik, R. L., 1974, "Brittle Fracture of Solids with Arbitrary Cracks", Int J Frac, Vol. 10, pp. 507-527. https://doi.org/10.1007/BF00155254
- Nuismer, R., 1975, "An Energy Release Rate Criterion for Mixed Mode Fracture", Int J Frac, Vol. 11, pp. 245-250. https://doi.org/10.1007/BF00038891
- Sih, G., 1974, "Strain-Energy-Density Factor Applied to Mixed-mode Crack Problems", Int J Frac, Vol. 10, pp. 305-321. https://doi.org/10.1007/BF00035493
- ABAQUS User's Manual, version 6.12, 2012.
- Turon, A., C.G. Daivila, Camanho, P.P, and Costa, J., 2007, "An Engineering Solution for Mesh Size Effects in the Simulation of Delamination Using Cohesive Zone Models," Engineering Fracture Mechanics, Vol. 74, pp. 1665-1682. https://doi.org/10.1016/j.engfracmech.2006.08.025
- Geubelle, P.H. and Baylor, J, 1998, "Impact-induced Delamination of Laminated Composites: a 2D Simulation," Composites Part B: Engineering, Vol. 29, No. 5, pp. 589-602. https://doi.org/10.1016/S1359-8368(98)00013-4
- Volokh, K. Y., 2004, "Comparison between Cohesive Zone Models", Num Meth in Biomed Eng, Vol 20, pp. 845-856. https://doi.org/10.1002/cnm.717
- Song, K., Davila, C.G., and Rose, A., 2008, "Guidelines and Parameter Selection for the Simulation of Progressive Delamination," 2008 Abaqus User's Conference.
- Nielsen, K. L., and John W. Hutchinson, 2012, "Cohesive Traction-Separation Laws for Tearing of Ductile Metal Plates", International Journal of Impact Engineering, Vol. 48, pp. 15-23. https://doi.org/10.1016/j.ijimpeng.2011.02.009
- Tessler, A., Sleight, D., and Wang, J. T., 2005, "Effective Modeling and Nonlinear Shell Analysis of Thin Membranes Exhibiting Structural Wrinkling", Journal of Spacecrafts and Rockets, Vol. 42, No. 2, pp. 287-298. https://doi.org/10.2514/1.3915
- Woo, K., Zignego, D. L., and Jenkins, C. H., 2011, "Tearing of Thin Sheets with Wrinkling", 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA 2011-2089.