DOI QR코드

DOI QR Code

Bi-Directional Interleaved Current-Fed Resonant Converter with Reduced Sized of Output Filter for FCEV

출력 필터의 크기를 줄인 연료전지 자동차용 양방향 인터리브드 전류원 공진형 컨버터

  • Moon, Dong-Ok (Dept. of Electrical & Information Eng., Seoul Nat'l Univ. of Science and Technology) ;
  • Park, Jun-Sung (Dept. of New Energy Eng., Seoul Nat'l Univ. of Science and Technology) ;
  • Choi, Se-Wan (Dept. of Electrical & Information Eng., Seoul Nat'l Univ. of Science and Technology)
  • Received : 2014.08.25
  • Accepted : 2014.09.15
  • Published : 2014.12.20

Abstract

This study proposes a bi-directional interleaved current-fed resonant converter (CRC) with reduced size of the output filter for a fuel cell electric vehicle. The proposed CRC achieves zero-current switching turn on and off of switches and diodes and makes ripple current of the output capacitor theoretically zero. As a result, the cost and volume of the output capacitor are significantly reduced. The two-stage power conversion technique is also applied for wide input and output voltage range operations. A 2kW prototype of the proposed converter is built and tested to verify the validity of the proposed operation.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. F. Krismer and J. W.Kolar, "Efficiency-optimized high-current dual active bridge converter for automotive applications," IEEE Trans. Ind. Electron., Vol. 59, No. 7, pp. 2745-2760, Jul. 2012. https://doi.org/10.1109/TIE.2011.2112312
  2. Y. Wang, S. W. H. de Haan, and J. A. Ferreira, "Optimal operating ranges of three modulation methods in dual active bridge converters," in Proc. 6th IEEE IPEMC, Wuhan, China, pp. 1397-1401, May 17-20, 2009.
  3. D. Hamza and M. Pahlevaninezhad, "Implementation of a novel digital active EMI technique in a DSP-based DC-DC digital controller used in electric vehicle (EV)," IEEE Trans. Power Electron., Vol. 28, No. 7, pp. 3126-3137, Jul. 2013. https://doi.org/10.1109/TPEL.2012.2223764
  4. R. Yu, B. M. H. Pong, B. W.-K. Ling, and J. Lam, "Two-stage optimization method for efficient power converter design including light load operation," IEEE Trans. Power Electron., Vol. 27, No. 3, pp. 1327-1337, Mar. 2012. https://doi.org/10.1109/TPEL.2011.2114676
  5. J. Park, M. Kim, and S. Choi, "Fixed frequency series loaded resonant converter based battery charger which is insensitive to resonant component tolerances," in Proc. 7th Int. Power Electron. Motion Control Conf., pp. 918-922, Jun. 2-5, 2012.
  6. J. Park and S. Choi, "Design and control of a bidirectional resonant DC-DC converter for automotive engine/battery hybrid power generators," IEEE Trans. Power Electron., Vol. 29, No. 7, pp. 3748-3757, Jul. 2014. https://doi.org/10.1109/TPEL.2013.2281826
  7. J. Park and S. Choi, "Development of 12V, 1000A isolated bidirectional resonant DC-DC converter," The Transactions of the Korean Institute of Power Electronics, Vol. 19, No. 1, Feb. 2014. https://doi.org/10.6113/TKPE.2014.19.1.57
  8. S. Dwari and L. Parsa, "An efficient high-step-up interleaved DC-DC converter with a common active clamp," IEEE Trans. Power Electron., Vol. 26, No. 1, pp. 66-78, Jan. 2011. https://doi.org/10.1109/TPEL.2010.2051816
  9. C. Yoon, J. Kim, and S. Choi, "Multiphase DC-DC converters using a boost-half-bridge cell for high-voltage and high-power applications," IEEE Trans. Power Electron., Vol. 26, No. 2, pp. 381-388, Feb. 2011. https://doi.org/10.1109/TPEL.2010.2060498
  10. K. Yi and G. Moon, "Novel two-phase interleaved LLC series-resonant converter using a phase of the resonant capacitor," IEEE Trans. Ind. Electron., Vol. 56, No. 5, pp. 1815-1819, 2009. https://doi.org/10.1109/TIE.2008.2011310
  11. D. Joo, D. Kim, B. Lee, "Input current ripple reduction algorithm for interleaved DC-DC converter," The Transactions of the Korean Institute of Power Electronics, Vol. 19, No. 3, Jun. 2014. https://doi.org/10.6113/TKPE.2014.19.3.220