DOI QR코드

DOI QR Code

Flexural bond strength behaviour in OPC concrete of NBS beam for various corrosion levels

  • Shetty, Akshatha (Department of Civil Engineering, National Institute of Technology) ;
  • Venkataramanaa, Katta (Department of Civil Engineering, National Institute of Technology) ;
  • Babu Narayan, K.S. (Department of Civil Engineering, National Institute of Technology)
  • 투고 : 2013.06.25
  • 심사 : 2013.12.09
  • 발행 : 2014.01.10

초록

Corrosion is one of the primary reasons why structures have limited durability. The present investigation is carried out to study the behavior of RC (Reinforced Concrete) structural members subjected to corrosion. Experimental investigations were carried out on National Bureau of Standard (NBS), RC beam specimens made of Ordinary Portland Cement (OPC) concrete. Load versus deflection behaviour was studied for different levels of corrosion i.e., 2.5%, 5%, 7.5% and 10%. It is observed that for every percentage increase in corrosion level, there is about 1.6% decrease in load carrying capacity. Also as the amount of corrosion increases there is a reduction in bond stress.

키워드

참고문헌

  1. Abdullah, A., Ahmad, S., Al-Gahtani, Abdur, R.A. and Rasheeduzzafar, (1996), "Effect of reinforcement corrosion on bond strength", Construct. Build. Mater., 10(2), 123-129. https://doi.org/10.1016/0950-0618(95)00077-1
  2. Ahamad, S. (2009), "Techniques for inducing accelerated corrosion of steel in concrete", Arabian J. Sci. Eng., 34(2C), 95-104.
  3. ASTM G1 (2000), "Standard practice for preparing, cleaning, and evaluating corrosion Test specimens", American Society for Testing and Materials, 1-9.
  4. Beaudoin, J.J., Gu, G.P. and Ramachandran, V.S. (2001), Techniques for corrosion investigation in reinforced concrete, Noyes Publications, New Jersey.
  5. Bhaskar, S., Bharatkumar, B.H., Ravindra, G. and Neelamegam, M. (2010), "Effect of corrosion on the bond behavior of OPC and PPC concrete", J. Struct. Eng., 37(1), 37-42.
  6. Bondar, D., Cyril, J.L., Neil, B.M. and Hassani, N. (2012), "Oxygen and chloride permeability of alkaliactivated natural pozzoloan concrete", ACI Mater. J., 109(1), 53-61.
  7. IS 456 (2000), Indian standards Code of Practice for Plain and Reinforced Concrete (Forth Revision), Bureau of Indian Standards, New Delhi.
  8. IS 8112 (1989), 43 Grade Ordinary Portland Cement - Specification, Bureau of Indian Standards, New Delhi.
  9. IS 10262 (2009), Recommended guidelines for concrete mix design, Bureau of Indian Standards, New Delhi.
  10. Kurklu, G., Başpinar, M.S. and Ergun, A. (2013), "A comparative study on bond of different grade reinforcing steels in concrete under accelerated corrosion", Steel Compos. Struct., 14(3), 229-242. https://doi.org/10.12989/scs.2013.14.3.229
  11. Paul, R.J. (1978), "Top-bar and embedment length effects in reinforced concrete beams", Master Thesis, Department of Civil Engineering and Applied Mechanics, Mc Gill University Canada.
  12. Pradhan, B. and Bhattacharjee, B. (2009), "Performance evaluation of rebar in chloride contaminated concrete by corrosion rate", Construct. Build. Mater., 23(6), 2346-2356. https://doi.org/10.1016/j.conbuildmat.2008.11.003
  13. Rajamane, N.P., Nataraja, M.C., Lakshmanan, N. and Dattatreya, J.K. (2011), "Accelerated test for corrosion of steel in geopolymer concretes", ICI J., 10(3), 7-15.

피인용 문헌

  1. Stochastic modelling and lifecycle performance assessment of bond strength of corroded reinforcement in concrete vol.54, pp.2, 2015, https://doi.org/10.12989/sem.2015.54.2.319
  2. Influence of ground pumice powder on the bond behavior of reinforcement and mechanical properties of self-compacting mortars vol.20, pp.3, 2014, https://doi.org/10.12989/cac.2017.20.3.283
  3. Bond deterioration of corroded steel in two different concrete mixes vol.63, pp.6, 2017, https://doi.org/10.12989/sem.2017.63.6.725