References
- Bowen RL. Use of epoxy resins in restorative materials. J Dent Res 1956;35:360-369. https://doi.org/10.1177/00220345560350030501
- Eick JD, Welch FH. Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity. Quintessence Int 1986;17:103-111.
- Sakaguchi RL, Peters MC, Nelson SR, Douglas WH, Poort HW. Effects of polymerization contraction in composite restorations. J Dent 1992;20:178-182. https://doi.org/10.1016/0300-5712(92)90133-W
- Eick JD, Kotha SP, Chappelow CC, Kilway KV, Giese GJ, Glaros AG, Pinzino CS. Properties of silorane-based dental resins and composites containing a stress-reducing monomer. Dent Mater 2007;23:1011-1017. https://doi.org/10.1016/j.dental.2006.09.002
- Lien W, Vandewalle KS. Physical properties of a new silorane-based restorative system. Dent Mater 2010;26:337-344. https://doi.org/10.1016/j.dental.2009.12.004
- Papadogiannis D, Kakaboura A, Palaghias G, Eliades G. Setting characteristics and cavity adaptation of low-shrinking resin composites. Dent Mater 2009;25:1509-1516. https://doi.org/10.1016/j.dental.2009.06.022
- Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater 2005;21:68-74. https://doi.org/10.1016/j.dental.2004.10.007
- Ilie N, Hickel R. Silorane-based dental composite: behavior and abilities. Dent Mater J 2006;25:445-454. https://doi.org/10.4012/dmj.25.445
- Bala O, Uctasli MB, Tuz MA. Barcoll hardness of different resin-based composites cured by halogen or light emitting diode (LED). Oper Dent 2005;30:69-74.
- Rueggeberg FA, Caughman WF, Curtis JW Jr, Davis HC. Factors affecting cure at depths within light-activated resin composites. Am J Dent 1993;6:91-95.
- Soh MS, Yap AU, Siow KS. The effectiveness of cure of LED and halogen curing lights at varying cavity depths. Oper Dent 2003;28:707-715.
- Emami N, Sjodahl M, Soderholm KJ. How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites. Dent Mater 2005;21:721-730. https://doi.org/10.1016/j.dental.2005.01.002
- Ferracane JL. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater 1985;1:11-14. https://doi.org/10.1016/S0109-5641(85)80058-0
- Visvanathan A, Ilie N, Hickel R, Kunzelmann KH. The influence of curing times and light curing methods on the polymerization shrinkage stress of a shrinkage-optimized composite with hybrid-type prepolymer fillers. Dent Mater 2007;23:777-784. https://doi.org/10.1016/j.dental.2006.06.019
- Yap AU. Effectiveness of polymerization in composite restoratives claiming bulk placement: impact of cavity depth and exposure time. Oper Dent 2000;25:113-120.
- Chen YC, Ferracane JL, Prahl SA. A pilot study of a simple photon migration model for predicting depth of cure in dental composite. Dent Mater 2005;21:1075-1086. https://doi.org/10.1016/j.dental.2005.05.002
- Schneider LF, Pfeifer CS, Consani S, Prahl SA, Ferracane JL. Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites. Dent Mater 2008;24:1169-1177. https://doi.org/10.1016/j.dental.2008.01.007
- Bala O, Olmez A, Kalayci S. Effect of LED and halogen light curing on polymerization of resin-based composites. J Oral Rehabil 2005;32:134-140. https://doi.org/10.1111/j.1365-2842.2004.01399.x
- Tarle Z, Meniga A, Knezevic A, Sutalo J, Ristic M, Pichler G. Composite conversion and temperature rise using a conventional, plasma arc, and an experimental blue LED curing unit. J Oral Rehabil 2002;29:662-667. https://doi.org/10.1046/j.1365-2842.2002.00866.x
- Palin WM, Fleming GJ, Burke FJ, Marquis PM, Randall RC. Monomer conversion versus flexure strength of a novel dental composite. J Dent 2003;31:341-351. https://doi.org/10.1016/S0300-5712(03)00050-2
- Kusgoz A , Ulker M, Yesilyurt C, Yoldas OH, Ozil M, Tanriver M. Silorane-based composite: depth of cure, surface hardness, degree of conversion, and cervical microleakage in Class II cavities. J Esthet Restor Dent 2011;23:324-335. https://doi.org/10.1111/j.1708-8240.2011.00411.x
- Palin WM , Fleming GJ, Burke FJ, Marquis PM, Randall RC. The reliability in flexural strength testing of a novel dental composite. J Dent 2003;31:549-557. https://doi.org/10.1016/S0300-5712(03)00110-6
- D'Alpino PH, Bechtold J, dos Santos PJ, Alonso RC, Di Hipolito V, Silikas N, Rodrigues FP. Methacrylate- and silorane-based composite restorations: hardness, depth of cure and interfacial gap formation as a function of the energy dose. Dent Mater 2011;27:1162-1169. https://doi.org/10.1016/j.dental.2011.08.397
- Rueggeberg FA, Hashinger DT, Fairhurst CW. Calibration of FTIR conversion analysis of contemporary dental resin composites. Dent Mater 1990;6:241-249. https://doi.org/10.1016/S0109-5641(05)80005-3
- Torres SA, Silva GC, Maria DA, Campos WR, Magalhaes CS, Moreira AN. Degree of conversion and hardness of a silorane-based composite resin: effect of light-curing unit and depth. Oper Dent 2014;39:e137-146. https://doi.org/10.2341/12-479
- Guiraldo RD, Consani S, Consani RL, Berger SB, Mendes WB, Sinhoreti MA, Correr-Sobrinho L. Comparison of silorane and methacrylate-based composite resins on the curing light transmission. Braz Dent J 2010;21:538-542. https://doi.org/10.1590/S0103-64402010000600010
- Andrzejewska E, Linden LA, Rabek JF. The role of oxygen in camphorquinone-initiated photopolymerization. Macromol Chem Phys 1998;199:441-449. https://doi.org/10.1002/(SICI)1521-3935(19980301)199:3<441::AID-MACP441>3.0.CO;2-N
- Schulze S, Vogel H. Aspects of the safe storage of acrylic monomers: kinetics of the oxygen consumption. Chem Eng Technol 1998;21:829-837. https://doi.org/10.1002/(SICI)1521-4125(199810)21:10<829::AID-CEAT829>3.0.CO;2-T
- Corr AB, Sinhoreti MA, Sobrinho LC, Tango RN, Schneider LF, Consani S. Effect of the increase of energy density on Knoop hardness of dental composites light-cured by conventional QTH, LED and xenon plasma arc. Braz Dent J 2005;16:218-224. https://doi.org/10.1590/S0103-64402005000300009
- Tilbrook DA, Clarke RL, Howle NE, Braden M. Photocurable epoxy-polyol matrices for use in dental composites I. Biomaterials 2000;21:1743-1753. https://doi.org/10.1016/S0142-9612(00)00059-4
- Bechtold J, Dos Santos PJ, Anido-Anido A, Di Hipolito V, Alonso RC, D'Alpino PH. Hardness, polymerization depth, and internal adaptation of Class II silorane composite restorations as a function of polymerization protocol. Eur J Dent 2012;6:133-140.
- Bouschlicher MR, Rueggeberg FA, Wilson BM. Correlation of bottom-to-top surface microhardness and conversion ratios for a variety of resin composite compositions. Oper Dent 2004;29:698-704.
- Eick JD, Kostoryz EL, Rozzi SM, Jacobs DW, Oxman JD, Chappelow CC, Glaros AG, Yourtee DM. In vitro biocompatibility of oxirane/polyol dental composites with promising physical properties. Dent Mater 2002;18:413-421. https://doi.org/10.1016/S0109-5641(01)00071-9
- Fujita K, Nishiyama N, Nemoto K. Okado T, Ikemi T. Effect of base monomer's refractive index on curing depth and polymerization conversion of photo-cured resin composites. Dent Mater J 2005;24:403-408. https://doi.org/10.4012/dmj.24.403
- Odian G. Principles of polymerization. 4th ed. New York: John Wiley; 2004.
- Shibayama M, Ozeki S, Norisuye T. Real-time dynamic light scattering on gelation and vitrification. Polymer 2005;46:2381-2388. https://doi.org/10.1016/j.polymer.2005.01.018
Cited by
- Influência de três modos de fotopolimerização sobre a microdureza de três resinas compostas vol.26, pp.spe, 2016, https://doi.org/10.1590/0104-1428.1855
- Resistencia a la compresión del ionómero de vidrio y de la resina compuesta. Estudio in vitro vol.21, pp.2, 2014, https://doi.org/10.1016/j.rodmex.2017.05.006
- Compressive strength of glass ionomer and composite resin. In vitro study vol.21, pp.2, 2014, https://doi.org/10.1016/j.rodmex.2017.05.015
- LIGHT POLYMERIZATION OF PHOTO-CURED COMPOSITE MATERIALS: MODERN APPROACHES AND APPLICATION PECULIARITIES vol.2018, pp.4, 2014, https://doi.org/10.29254/2077-4214-2018-4-2-147-72-77
- Effect of the Time of Salivary Contamination during Light Curing on Degree of Conversion and Microhardness of a Restorative Composite Resin vol.3, pp.3, 2018, https://doi.org/10.3390/biomimetics3030023
- Shrinkage in composites: An enigma vol.11, pp.5, 2014, https://doi.org/10.4103/jioh.jioh_36_19
- Development and status of resin composite as dental restorative materials vol.136, pp.44, 2014, https://doi.org/10.1002/app.48180
- Influence of Different Cordless Light-emitting-diode Units and Battery Levels on Chemical, Mechanical, and Physical Properties of Composite Resin vol.45, pp.4, 2014, https://doi.org/10.2341/19-095-l
- Light-Curing Units, Photoinitiators System, and Monomers on Physico-Mechanical Properties of Experimental Composite Resins vol.25, pp.3, 2014, https://doi.org/10.1590/s1517-707620200003.1093
- Shrinkage Stress and Temperature Variation in Resin Composites Cured via Different Photoactivation Methods: Insights for Standardisation of the Photopolymerisation vol.13, pp.13, 2021, https://doi.org/10.3390/polym13132065