References
- Vagkopoulou T, Koutayas SO, Koidis P, Strub JR. Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Dent 2009;4:130-151.
- Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989;23:45-61. https://doi.org/10.1002/jbm.820230105
- Hayashi K, Matsuguchi N, Uenoyama K, Sugioka Y. Re-evaluation of the biocompatibility of bioinert ceramics in vivo. Biomaterials 1992;13:195-200. https://doi.org/10.1016/0142-9612(92)90184-P
- Taira M, Nomura Y, Wakasa K, Yamaki M, Matsui A. Studies on fracture toughness of dental ceramics. J Oral Rehabil 1990;17:551-563. https://doi.org/10.1111/j.1365-2842.1990.tb01426.x
- Blatz, MB. Long-term clinical success of all ceramic posterior restorations. Quintessence Int 2002;33:415-426.
- Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-558. https://doi.org/10.1016/j.prosdent.2005.04.011
- Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 2006;96:104-114. https://doi.org/10.1016/j.prosdent.2006.06.001
- Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. J Prosthet Dent 1998;80:280-301. https://doi.org/10.1016/S0022-3913(98)70128-3
- Piwowarczyk A, Lauer HC, Sorensen JA. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent 2005;30:382-388.
- Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 2002;4:7-22.
- Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003;89:268-274. https://doi.org/10.1067/mpr.2003.50
- Cavalcanti AN, Pilecki P, Foxton RM, Watson TF, Oliveira MT, Gianinni M, Marchi GM. Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed Laser Surg 2009;27:473-479. https://doi.org/10.1089/pho.2008.2293
- Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-362. https://doi.org/10.1016/j.prosdent.2004.02.001
- Tanaka R, Fujishima A, Shibata Y, Manabe A, Miyazaki T. Cooperation of phosphate monomer and silica modification on zirconia. J Dent Res 2008;87:666-670. https://doi.org/10.1177/154405910808700705
- Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007;23:45-50. https://doi.org/10.1016/j.dental.2005.11.040
- Blatz MB. Adhesive cementation of high-strength ceramics. J Esthet Restor Dent 2007;19:238-239. https://doi.org/10.1111/j.1708-8240.2007.00109.x
- Ural C, Kulunk T, Kulunk S, Kurt M. The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand 2010;68:354-359. https://doi.org/10.3109/00016357.2010.514720
- Casucci A, Mazzitelli C, Monticelli F, Toledano M, Osorio R, Osorio E, Papacchini F, Ferrari M. Morphological analysis of three zirconium oxide ceramics: effect of surface treatments. Dent Mater 2010;26:751-760. https://doi.org/10.1016/j.dental.2010.03.020
- Akyil MS, Uzun IH, Bayindir F. Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation. Photomed Laser Surg 2010;28:801-808. https://doi.org/10.1089/pho.2009.2697
-
Paranhos MP, Burnett LH Jr, Magne P. Effect of Nd:YAG laser and
$CO_2$ laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int 2011;42:79-89. - Akin H, Ozkurt Z, Kirmali O, Kazazoglu E, Ozdemir AK. Shear bond strength of resin cement to zirconia ceramic after aluminum oxide sandblasting and various laser treatments. Photomed Laser Surg 2011;29:797-802. https://doi.org/10.1089/pho.2011.3039
- Foxton RM, Cavalcanti AN, Nakajima M, Pilecki P, Sherriff M, Melo L, Watson TF. Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment. J Prosthodont 2011;20:84-92. https://doi.org/10.1111/j.1532-849X.2010.00678.x
- Ural C, KalyoncuoGlu E, Balkaya V. The effect of different power outputs of carbon dioxide laser on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand 2012;70:541-546. https://doi.org/10.3109/00016357.2011.600718
- Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J Biomed Mater Res B Appl Biomater 2006;77:28-33.
- Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 2006;95:430-436. https://doi.org/10.1016/j.prosdent.2006.03.016
- Silva LH, Costa AK, Queiroz JR, Bottino MA, Valandro LF. Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength. Oper Dent 2012;37:634-640. https://doi.org/10.2341/11-374-L
- Akin H, Tugut F, Akin GE, Guney U, Mutaf B. Effect of Er:YAG laser application on the shear bond strength and microleakage between resin cements and Y-TZP ceramics. Lasers Med Sci 2012;27:333-338. https://doi.org/10.1007/s10103-011-0883-4
- Ersu B, Yuzugullu B, Ruya Yazici A, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 2009;37:848-856. https://doi.org/10.1016/j.jdent.2009.06.017
- Lin Y, Song X, Chen Y, Zhu Q, Zhang W. Effect of Er:YAG laser irradiation on bonding property of zirconia ceramics to resin cement. Photomed Laser Surg 2013;31:619-625. https://doi.org/10.1089/pho.2013.3489
- Demir N, Subasi MG, Ozturk AN. Surface roughness and morphologic changes of zirconia following different surface treatments. Photomed Laser Surg 2012;30:339-345. https://doi.org/10.1089/pho.2011.3213
- Erdem A, Akar GC, Erdem A, Kose T. Effects of different surface treatments on bond strength between resin cements and zirconia ceramics. Oper Dent 2014;39:e118-127. https://doi.org/10.2341/12-420-L
- Usumez A, Hamdemirci N, Kotoglu BY, Simsek I, Parlar O, Sari T. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci 2013;28:259-266. https://doi.org/10.1007/s10103-012-1136-x
Cited by
- Adhesion to Zirconium Dioxide Used for Dental Reconstructions: Surface Conditioning Concepts, Challenges, and Future Prospects vol.2, pp.4, 2015, https://doi.org/10.1007/s40496-015-0071-x
- The effect of subpressure on the bond strength of resin to zirconia ceramic vol.12, pp.6, 2017, https://doi.org/10.1371/journal.pone.0179668
- Bond Strength of Resin Cement and Glass Ionomer to Nd:YAG Laser-Treated Zirconia Ceramics pp.1059941X, 2017, https://doi.org/10.1111/jopr.12651
- Effect of femtosecond laser beam angle and formed shape on surface roughness and shear bond strength between zirconia and resin cement pp.1568-5616, 2017, https://doi.org/10.1080/01694243.2017.1414479
- Orthodontic bracket bonding to glazed full-contour zirconia vol.41, pp.2, 2016, https://doi.org/10.5395/rde.2016.41.2.106
- Effects of Laser Treatment on the Bond Strength of Differently Sintered Zirconia Ceramics vol.34, pp.7, 2016, https://doi.org/10.1089/pho.2015.4064
- The effects of lasers on bond strength to ceramic materials: A systematic review and meta-analysis vol.13, pp.1, 2018, https://doi.org/10.1371/journal.pone.0190736
- Effect of different surface treatments on the shear bond strength of resin cement to zirconia ceramic and metal alloy vol.32, pp.20, 2018, https://doi.org/10.1080/01694243.2018.1470363
- Shear Bond Strength of MDP-Containing Self-Adhesive Resin Cement and Y-TZP Ceramics: Effect of Phosphate Monomer-Containing Primers vol.2015, pp.None, 2014, https://doi.org/10.1155/2015/389234
- The Effect of Femtosecond Laser Treatment on the Effectiveness of Resin-Zirconia Adhesive: An In Vitro Study vol.7, pp.4, 2016, https://doi.org/10.15171/jlms.2016.38
- Zirconia based ceramics, some clinical and biological aspects: Review vol.2, pp.2, 2014, https://doi.org/10.1016/j.fdj.2016.10.002
- Effect of Er: YAG Laser, Sandblast and Several Types of Universal Bonding on Shear Bond Strength of Zirconia Ceramic to Composite Resin vol.19, pp.10, 2014, https://doi.org/10.5005/jp-journals-10024-2412
- Influence of Er,Cr:YSGG Laser Irradiation on the Push-Out Bond Strength of Zirconia and Glass Fiber Posts with Radicular Dentin vol.2019, pp.None, 2014, https://doi.org/10.1155/2019/4869853
- Adhesion behavior of conventional and high‐translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology vol.31, pp.4, 2014, https://doi.org/10.1111/jerd.12490
- Effect of thermal and mechanical cycles on shear bond strength of zirconia core to porcelain veneer under different surface treatments vol.13, pp.3, 2014, https://doi.org/10.15171/joddd.2019.035
- Effect of femtosecond laser and silica coating on the bond strength of zirconia ceramic vol.119, pp.5, 2020, https://doi.org/10.1080/17436753.2020.1780552
- Effect of different laser treatments on the shear bond strength of zirconia ceramic to resin cement vol.18, pp.1, 2014, https://doi.org/10.4103/1735-3327.321867
- Effect of Nd:YAG, Er,Cr:YSGG Laser Irradiation, and Adjunctive Photodynamic Therapy on Push-Out Bond Strength of Zirconia Posts to Radicular Dentin vol.2021, pp.None, 2014, https://doi.org/10.1155/2021/5523242
- Effect of laser irradiation on the adhesion of resin-based materials to zirconia: a systematic review and meta-analysis vol.35, pp.10, 2014, https://doi.org/10.1080/01694243.2020.1834287