초록
최근 지상파 방송에서 듀얼스트림 방식을 사용한 HD급의 3D 방송서비스가 시작되어 많은 관심이 이어지고 있다. 2011년 12월에 듀얼스트림 방식의 지상파 3DTV 송수신 정합 표준이 제정되고, 2012년 10월 시범방송이 실시되는 등 국내 기술이 3D HDTV 서비스를 선도하고 있는 상황이다. 하지만, 안정적인 HD급의 지상파 방송에서 3D 방송서비스(이하 3D HDTV)를 제공하기 위해서는 보다 데이터 전송률을 높이는 전송이 필요하다. 본 논문에서는 Reed Solomon 부호와 블록 LDPC 부호를 사용하고 16QAM 변조를 사용하여 기존 방식과 비교하여 전송 용량을 증대할 수 있다는 사실을 확인하였다. AWGN 채널에서 모의 실험한 결과 기존의 ATSC 송수신 정합표준, 수정된 ATSC 전송방식[2]과 비교하여 각각 2.97dB, 1.12dB 가량의 SNR 이득이 있음을 확인하였고, 3D HDTV 서비스의 안정적인 서비스를 위해 요구되는 29Mbps의 데이터 전송률로 전송이 가능하여 기존시스템에 비해 약1.5배의 전송용량 증대가 가능한 것으로 확인되었다. 이로서 6MHz의 한정된 대역에서 HD급의 3D 방송서비스의 성능 개선이 가능할 것으로 예상된다.
The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.