Restorative Dentistry and Endodontics

  • 제38권4호
  • /
  • Pages.234-240
  • /
  • 2013
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

Effects of dentin moisture on the push-out bond strength of a fiber post luted with different self-adhesive resin cements

  • Turker, Sevinc Aktemur (Department of Endodontics, Bulent Ecevit University Faculty of Dentistry) ;
  • Uzunoglu, Emel (Department of Endodontics, Hacettepe University Faculty of Dentistry) ;
  • Yilmaz, Zeliha (Department of Endodontics, Hacettepe University Faculty of Dentistry)
  • 투고 : 2013.06.17
  • 심사 : 2013.09.22
  • 발행 : 2013.11.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Objectives: This study evaluated the effects of intraradicular moisture on the pushout bond strength of a fibre post luted with several self-adhesive resin cements. Materials and Methods: Endodontically treated root canals were treated with one of three luting cements: (1) RelyX U100, (2) Clearfil SA, and (3) G-Cem. Roots were then divided into four subgroups according to the moisture condition tested: (I) dry: excess water removed with paper points followed by dehydration with 95% ethanol, (II) normal moisture: canals blot-dried with paper points until appearing dry, (III) moist: canals dried by low vacuum using a Luer adapter, and (IV) wet: canals remained totally flooded. Two 1-mm-thick slices were obtained from each root sample and bond strength was measured using a push-out test setup. The data were analysed using a two-way analysis of variance and the Bonferroni post hoc test with p = 0.05. Results: Statistical analysis demonstrated that moisture levels had a significant effect on the bond strength of luting cements (p < 0.05), with the exception of G-Cem. RelyX U100 displayed the highest bond strength under moist conditions (III). Clearfil SA had the highest bond strength under normal moisture conditions (II). Statistical ranking of bond strength values was as follows: RelyX U100 > Clearfil SA > G-Cem. Conclusions: The degree of residual moisture significantly affected the adhesion of luting cements to radicular dentine.

키워드

참고문헌

  1. Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, Schmalz G. Bond strength of a new universal selfadhesive resin luting cement to dentin and enamel. Clin Oral Investig 2005;9:161-167. https://doi.org/10.1007/s00784-005-0308-5
  2. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an autoadhesive luting material to enamel and dentin. Dent Mater 2004;20:963-971. https://doi.org/10.1016/j.dental.2004.03.002
  3. Bitter K, Meyer-Lueckel H, Priehn K, Kanjuparambil JP, Neumann K, Kielbassa AM. Effects of luting agent and thermocycling on bond strengths to root canal dentine. Int Endod J 2006;39:809-818. https://doi.org/10.1111/j.1365-2591.2006.01155.x
  4. Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF, Li F. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. J Adhes Dent 2003;5:91-105.
  5. Tay FR, Pashley DH, Yiu CK, Sanares AM, Wei SH. Factors contributing to the incompatibility between simplifiedstep adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent 2003;5:27-40.
  6. Vichi A, Grandini S, Davidson CL, Ferrari M. An SEM evaluation of several adhesive systems used for bonding fiber posts under clinical conditions. Dent Mater 2002; 18:495-502. https://doi.org/10.1016/S0109-5641(01)00065-3
  7. Kim DS, Park SH, Choi GW, Choi KK. The effect of bonding resin on bond strength of dual-cure resin cements. J Korean Acad Conserv Dent 2007;32:426-436. https://doi.org/10.5395/JKACD.2007.32.5.426
  8. Kim SR, Yum J, Park JK, Hur B, Kim HC. Comparison of push-out bond strength of post according to cement application methods. J Korean Acad Conserv Dent 2010; 35:479-485. https://doi.org/10.5395/JKACD.2010.35.6.479
  9. Lührs AK, Guhr S, Günay H, Geurtsen W. Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro. Clin Oral Investig 2010;14:193-199. https://doi.org/10.1007/s00784-009-0279-z
  10. Monticelli F, Ferrari M, Toledano M. Cement system and surface treatment selection for fiber post luting. Med Oral Patol Oral Cir Bucal 2008;13:e214-221.
  11. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent 2006;8:327-335.
  12. Monticelli F, Osorio R, Mazzitelli C, Ferrari M, Toledano M. Limited decalcification/diffusion of self-adhesive cements into dentin. J Dent Res 2008;87:974-979. https://doi.org/10.1177/154405910808701012
  13. Viotti RG, Kasaz A, Pena CE, Alexandre RS, Arrais CA, Reis AF. Microtensile bond strength of new self-adhesive luting agents and conventional multistep systems. J Prosthet Dent. 2009;102:306-312. https://doi.org/10.1016/S0022-3913(09)60180-3
  14. Mazzitelli C, Monticelli F, Osorio R, Casucci A, Toledano M, Ferrari M. Effect of simulated pulpal pressure on selfadhesive cements bonding to dentin. Dent Mater 2008; 24:1156-1163. https://doi.org/10.1016/j.dental.2008.01.005
  15. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent 2008;10:251-258.
  16. Mormann W, Wolf D, Ender A, Bindl A, Gohring T, Attin T. Effect of two self-adhesive cements on marginal adaptation and strength of esthetic ceramic CAD/CAM molar crowns. J Prosthodont 2009;18:403-410. https://doi.org/10.1111/j.1532-849X.2009.00461.x
  17. Ferracane JL, Stansbury JW, Burke FJ. Self-adhesive resin cements - chemistry, properties and clinical considerations J Oral Rehabil 2011;38:295-314. https://doi.org/10.1111/j.1365-2842.2010.02148.x
  18. Bitter K, Meyer-Lueckel H, Priehn K, Kanjuparambil JP, Neumann K, Kielbassa AM. Effects of luting agent and thermocycling on bond strengths to root canal dentine. Int Endod J 2006;39:809-818. https://doi.org/10.1111/j.1365-2591.2006.01155.x
  19. Van Landuyt KL, Yoshida Y, Hirata I, Snauwaert J, De Munck J, Okazaki M, Suzuki K, Lambrechts P, Van Meerbeek B. Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res 2008;87:757-761. https://doi.org/10.1177/154405910808700804
  20. Dursun E, Wiechmann D, Attal JP. The effect of moisture on the shear bond strength of gold alloy rods bonded to enamel with a self-adhesive and a hydrophobic resin cement. Eur J Orthod 2010;32:264-267. https://doi.org/10.1093/ejo/cjp102
  21. Guarda GB, Goncalves LS, Correr AB, Moraes RR, Sinhoreti MA, Correr-Sobrinho L. Luting glass ceramic restorations using a self-adhesive resin cement under different dentin conditions. J Appl Oral Sci 2010;18: 244-248. https://doi.org/10.1590/S1678-77572010000300008
  22. Yoon SY, Park SH, Kim JW, Cho KM. Effect of dentin surface wetness on tensile bond strength of self adhesive resin cements. J Korean Acad Conserv Dent 2009;34:113-119. https://doi.org/10.5395/JKACD.2009.34.2.113
  23. Park JW. 'Wet or Dry tooth surface?' - for self-adhesive resin cement. Restor Dent Endod 2012;37:249-250. https://doi.org/10.5395/rde.2012.37.4.249
  24. Zmener O, Pameijer CH, Serrano SA, Vidueira M, Macchi RL. Significance of moist root canal dentin with the use of methacrylate-based endodontic sealers: an in vitro coronal dye leakage study. J Endod 2008;34:76-79.
  25. Mazzitelli C, Monticelli F, Toledano M, Ferrari M, Osorio R. Effect of thermal cycling on the bond strength of self-adhesive cements to fiber posts. Clin Oral Investig 2012;16:909-915. https://doi.org/10.1007/s00784-011-0576-1
  26. Skidmore LJ, Berzins DW, Bahcall JK. An in vitro comparison of the intraradicular dentin bond strength of Resilon and gutta-percha. J Endod 2006;32:963-966. https://doi.org/10.1016/j.joen.2006.03.020
  27. Ari H, Yaşar E, Belli S. Effects of NaOCl on bond strengths of resin cements to root canal dentin. J Endod 2003;29: 248-251. https://doi.org/10.1097/00004770-200304000-00004
  28. Kremeier K, Fasen L, Klaiber B, Hofmann N. Influence of endodontic post type (glass fiber, quartz fiber or gold) and luting material on push-out bond strength to dentin in vitro. Dent Mater 2008;24:660-666. https://doi.org/10.1016/j.dental.2007.06.029
  29. Macedo VC, Faria e Silva AL, Martins LR. Effect of cement type, relining procedure, and length of cementation on pull-out bond strength of fiber posts. J Endod 2010;36:1543-1546. https://doi.org/10.1016/j.joen.2010.04.014
  30. Ebert J, Leyer A, Günther O, Lohbauer U, Petschelt A, Frankenberger R, Roggendorf MJ. Bond strength of adhesive cements to root canal dentin tested with a novel pull-out approach. J Endod 2011;37:1558-1561. https://doi.org/10.1016/j.joen.2011.08.009
  31. Goracci C, Tavares AU, Fabianelli A, Monticelli F, Raffaelli O, Cardoso PC, Tay F, Ferrari M. The adhesion between fiber posts and root canal walls: comparison between microtensile and push-out bond strength measurements. Eur J Oral Sci 2004;112:353-361. https://doi.org/10.1111/j.1600-0722.2004.00146.x
  32. Bitter K, Paris S, Pfuertner C, Neumann K, Kielbassa AM. Morphological and bond strength evaluation of different resin cements to root dentin. Eur J Oral Sci 2009;117:326-333. https://doi.org/10.1111/j.1600-0722.2009.00623.x
  33. Zicari F, Couthino E, De Munck J, Poitevin A, Scotti R, Naert I, Van Meerbeek B. Bonding effectiveness and sealing ability of fiber-post bonding. Dent Mater 2008; 24:967-977. https://doi.org/10.1016/j.dental.2007.11.011
  34. Yoshida Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H,Inoue S, Tagawa Y, Suzuki K, De Munck J, Van Meerbeek B. Comparative study on adhesive performance of functional monomers. J Dent Res 2004; 83:454-458. https://doi.org/10.1177/154405910408300604
  35. Abo T, Uno S, Sano H. Comparison of bonding efficacy of an all-in-one adhesive with a self-etching primer system. Eur J Oral Sci 2004;112:286-292. https://doi.org/10.1111/j.1600-0722.2004.00126.x
  36. Moosavi H, Hariri I, Sadr A, Thitthaweerat S, Tagami J. Effects of curing mode and moisture on nanoindentation mechanical properties and bonding of a self-adhesive resin cement to pulp chamber floor. Dent Mater 2013;29:708-717. https://doi.org/10.1016/j.dental.2013.03.020

피인용 문헌

  1. Shear bond strengths of various self-adhesive resin cements between bovine dentin and 4 types of adherends vol.42, pp.4, 2015, https://doi.org/10.14815/kjdm.2015.42.4.365
  2. Is the bonding of self-adhesive cement sensitive to root region and curing mode? vol.25, pp.1, 2017, https://doi.org/10.1590/1678-77572015-0430
  3. Test methods for bond strength of glass fiber posts to dentin: A review vol.93, pp.1-2, 2017, https://doi.org/10.1080/00218464.2016.1184094
  4. Evaluation of the influence of time and concentration of sodium hypochlorite on the bond strength of glass fibre post pp.13291947, 2017, https://doi.org/10.1111/aej.12239