Structural Engineering and Mechanics

  • 제48권6호
  • /
  • Pages.791-807
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Preliminary design and structural responses of typical hybrid wind tower made of ultra high performance cementitious composites

  • Wu, Xiangguo (Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education) ;
  • Yang, Jing (School of Architecture Engineering, Harbin Engineering University) ;
  • Mpalla, Issa B. (Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education)
  • 투고 : 2013.07.30
  • 심사 : 2013.11.11
  • 발행 : 2013.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Ultra High Performance Cementitious Composites with compressive strength 200MPa (UHPCC-200) is proposed for the structural design of super high hybrid wind turbine tower to gain durability, ductility and high strength design objectives. The minimal wall thickness is analyzed using basic bending and compression theory and is modified by a toque influence coefficient. Two cases of wall thickness combination of middle and bottom segment including varied ratio and constant ratio are considered within typical wall thickness dimension. Using nonlinear finite element analysis, the effects of wall thickness combinations with varied and constant ratio and prestress on the structural stress and lateral displacement are calculated and analyzed. The design limitation of the segmental wall thickness combinations is recommended.

키워드

참고문헌

  1. Agbayani, N.A. and Vega, R.E. (2012), "The rapid evaluation of wind turbine tower structural systems: a historical and technical overview", Proceedings of Structures Congress 2012(ASCE), Chicago, USA, March.
  2. Behloul, M. (2007), "HPFRCC field of applications: Ductal recent experience", Proceedings of the 5th High Performance Fiber Reinforced Cement Composite (HPFRCC5), Mainz, Germany, July.
  3. Benjamin, A.G. (2006), Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders, Report No. FHWA-HRT-06-115, Federal Highway Administration, Mclean, VA.
  4. Cavill, B. and Chirgwin, G. (2003), "The worlds first Ductal road bridge Sherpherds gully creek bridge, NSW", Proceedings of the 21st Biennial Conference of the Concrete Institute of Australia, Brisbane.
  5. China Machinery Industry Federation (CMIF) (2001), Machinery industry standard of The People's Republic of China (JB/T 10300-2001), Wind Turbine Generator system-Design Requirements, China Machinery Industry Federation Press, Beijing, December.
  6. de Vries, E. (2009), "Advanced Tower Systems (ATS) of the Netherlands inaugurated a prototype of its patented concrete-tubular steel hybrid tower concept at one of Germany's wind turbine test fields, near Grevenbroich", Renewable Energy World, September-October.
  7. Graybeal, B., Hartamann, J. and Perry, V. (2004), "Ultra-high performance concrete for highway bridge", FIB Symposium, Avignon, April.
  8. Kittinun, S., Sherif, E.T. and Gustavo, P.M. (2010), "Behavior of high performance fiber reinforced cement composite under multi-axial compressive loading", Cement Concrete Compos., 32, 62-72. https://doi.org/10.1016/j.cemconcomp.2009.09.003
  9. Ma, L.H., Dai, H.T., Zhang, D.T. and Liu, D.Y. (2008), "Design and analysis for MW wind turbine tower", 2008 Annual Meeting of Clean & Efficient Coal Power Generation Technology Network, Nanjing, October.
  10. Okuma, H. et al. (2006), "The first highway bridge applying ultra high strength fiber reinforced concrete in Japan", Proceedings of the 7th International Conference on short and medium span bridge, Montreal.
  11. Ramadoss, P. and Nagamani, K. (2008), "A new strength model for the high-performance fiber reinforced concrete", Comput. Concrete, 5(1), 21-36. https://doi.org/10.12989/cac.2008.5.1.021
  12. Srithran, S. and Schmitz, G.M. (2013), "Design of tall wind turbine towers utilizing UHPC", Proceedings of the RILEM-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Marseille, France, October.
  13. Staffan, E., Tomas, L., Manouchehr, H., Thomas, S. and John, J. (2010), Tall towers for large wind turbine, Report from Vindforsk project V-342 Hoga torn forvindkraftverk.
  14. Wu, X.G. and Han, S.M. (2010), "Interface shear connection analysis of ultrahigh-performance fiber-reinforced concrete composite girders", J. Bridge Eng., ASCE, 15(5), 493-50. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000091
  15. Wu, X.G., Zhao, X.Y. and Han, S.M. (2012), "Structural analysis of circular UHPCC form hybrid pier under construction loads", Steel Compos. Struct., 12(2), 167-181. https://doi.org/10.12989/scs.2012.12.2.167
  16. Williams, E.M., Graham, S.S., Akers, S.A., Reed, P.A. and Rushing, T.S. (2010), "Constitutive property behavior of an ultra-high-performance concrete with and without steel fibers", Comput. Concrete, 7(2), 191-202. https://doi.org/10.12989/cac.2010.7.2.191
  17. Zerous, A. (2008), "Global development present situation and prospect of wind power", China Energy, 30(4), 23-33.
  18. Zhang, W.L. (2009), "Research On Cone-shaped tower of MW grade wind turbine", Shanxi University of Science and Technology, TM315, 15-22.
  19. Zou, L.H., Liang, S.G., Li, Q.S., Zhao, L. and Ge, Y.J. (2008), "Investigation of 3-D dynamic wind loads on lattice towers", Wind Struct., 11(4), 323-340. https://doi.org/10.12989/was.2008.11.4.323

피인용 문헌

  1. Flexural behavior of UHPC-RC composite beam vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.387
  2. Crashworthiness analysis on existing RC parapets rehabilitated with UHPCC vol.19, pp.1, 2017, https://doi.org/10.12989/cac.2017.19.1.087