Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Ultimate End Bearing Capacity of Drilled Shafts in Rocks

암반에 설치된 현장타설말뚝의 극한선단지지력에 관한 연구

  • Received : 2013.05.09
  • Accepted : 2013.10.10
  • Published : 2013.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The end bearing capacity of rock-socketed drilled shafts under axial loading is investigated by Hoek-cell tests and a numerical analysis. From the test results, it was found that the ultimate end bearing capacity ($q_{max}$) was influenced by pile diameter, rock mass modulus and the spacing of discontinuity. A new ultimate end bearing capacity method is proposed by taking end bearing capacity influence factors, including rock mass discontinuity, based on field data. Through comparisons with other field data, the proposed $q_{max}$ method represents a definite improvement in the prediction of ultimate end bearing capacity of rock-socketed drilled shafts.

본 연구에서는 Hoek-cell을 이용한 실내모형실험 및 개별요소해석을 수행하여 말뚝의 직경, 암반의 강도와 불연속면 조건이 암반에 근입된 현장타설말뚝의 선단부 거동에 미치는 영향을 분석하였다. 이를 통해 영향인자를 선정하였고, 실제 현장재하시험 데이터베이스를 구축하여 암반근입 현장타설말뚝의 극한선단지지력 예측식을 제안하였다. 또한, 제안된 극한선단지지력 산정식을 현장재하시험 결과와 비교 분석하여 그 적용성을 검증하였다. 그 결과, 시험말뚝이 근입된 암반의 불연속면 특성을 고려하지 못하고 일축압축강도만을 이용하여 극한선단지지력을 예측하는 기존 제안식들이 일부 재하시험 결과를 과도하게 예측하는 데 비해, 본 연구의 제안식은 선단부 거동 영향인자를 반영하여, 현장말뚝의 극한선단지지력을 적절히 예측하고 있음을 확인할 수 있었다.

Keywords

References

  1. AASHTO (1996), Standard Specifications for Highway Bridges, 16th ED: American Associations of State Highway and Transportation Officials, Washington, D.C.
  2. ARGEMA (1992), Design guides for offshore structures : Offshore pile design, ED: P. L. Tirant, Editions Technip, Paris, France.
  3. Baquelin, F., Frand, R., and Jezequel, J. F. (1982), "Parameters for friction piles in marine soils", 2nd International Conference in Numerical Methods for Offshore Piling, Austin, April.
  4. Carter, J.P. and Kulhawy, F.H. (1988), "Analysis and design of drilled shaft foundations socketed into rock", Final report, EL 5918/ Project 1493-4 / Electric Power Research Institute, Conell Univ., Ithaca, NY.
  5. Cho, C. H., Lee, M. H., Yoo, H. K., Kwon, H. G., and Park, E. S. (2003), "The Characterization of Surface Roughness of the Drilled Shaft into Rock", Journal of Korean Geo-environmental Society, Vol.4, No.2, pp.5-13.
  6. Cho, H. Y., Jung., S. S., and Seol, H. I. (2009), "End Bearing Load Transfer Behavior of Rock Socketed Drilled Shafts", Journal of Korean Geotechnical Society (KGS), Vol.25, No.8, pp.77-93.
  7. Coates, D. F. (1967), Rock Mechanics Principles, Energy Mines and Resources, Ottawa, Canada, Monograph 874.
  8. De Beer, E. (1986), "Different behavior of bored and driven piles", Proc. of 6th Danubian Conf. on Soil Mech. and Found. Eng., pp.307-318.
  9. Indraratna, B., Haque, A., and Aziz, N. (1998), "Laboratory modeling of shear behaviour of soft joints under constant normal stiffness conditions", Geotechnical and Geological Engineering, Vol.16, pp.17-44. https://doi.org/10.1023/A:1008880112926
  10. Jeong, S. S., Cho, H. Y., Cho, J. Y., Seol, H. I., and Lee, D. S. (2010), "Point bearing stiffness and strength of socketted drilled shafts in korean rocks", International Journal of Rock Mechanics and Mining Sciences, Vol.47, pp.983-995. https://doi.org/10.1016/j.ijrmms.2010.05.002
  11. Kim, S. I., Jeong, S. S., Cho, S. H., and Park, I. J. (1999), "Shear load transfer characteristics of drilled shafts in weathered rocks", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, pp.999-1010.
  12. Kim, T. J. and Yoo, C. S. (2013), "A Numerical Investigation on End Bearing Capacity of Single Pile Installed in Fractured Rock Mass", Journal of Korean Geotechnical Society (KGS), Vol.29, No.1, pp.61-70. https://doi.org/10.7843/kgs.2013.29.1.61
  13. Ladanyi, B. and Roy, A. (1971), "Some aspects of bearing capacity of rock mass", Proc. 7th Canadian Symposium on Rock Mechanics, Edmonton, pp.161-190.
  14. Lee, H. J. and Lee, H. K. (2006), "An Analysis on the Behavior Characteristics of the Side of Drilled Shafts in Rocks", Journal of Korean Geo-environmental Society, Vol.7, No.6, pp.101-111.
  15. Lee, J. H., Cho, H. Y., You, K. H., and Jeong, S. S. (2012), "A Study on the Ultimate Point Resistance of Rock Socketed Drilled Shafts Using FLAC3D and UDEC", Journal of Korean Geotechnical Society (KGS), Vol.28, No.1, pp.29-39. https://doi.org/10.7843/kgs.2012.28.1.29
  16. O'Neill, M. W. and Hassan, K. M. (1994), "Drilled shaft : effects of construction on performance and design criteria", Proceedings of the International Conference on Design and Construction of Deep Foundations, Federal Highways Administration, Washington D.C., Vol.1, pp.137-187.
  17. Reese, L. C. and O'Neill, M. W. (1988), Drilled shafts : Construction procedures and design methods, Publ. No. FHWA-HI-88-042, Federal Highway Administration, Washington, D.C.
  18. Rowe, P. K. and Armitage, H. H. (1987), "Theoretical solutions for axial deformation of drilled shafts in rock", Canadian Geotechnical Journal, Vol.24, pp.114-125. https://doi.org/10.1139/t87-010
  19. Seidel, J. P. and Harberfield, C. M. (1994), "A new approach to the prediction of drilled pier performance in rock", Proc. of the International Conf. on Design and Construction of Drilled Pier.
  20. Seol, H. I, Jeong, S. S., Cho, C. H., and You, K. H. (2008), "Shear load transfer for rock-socketed drilled shafts based on borehole roughness and geological strength index (GSI)", International Journal of Rock Mechanics and Mining Sciences, Vol.45, pp.848-861. https://doi.org/10.1016/j.ijrmms.2007.09.008
  21. Teng, W. C. (1962), Foundation design, Prentice-Hall, Inc, NJ.
  22. UDEC (2004), Universal Distinct Element Code, Ver. 4.0, Theory and Background Manual, Itasca Consulting Group, Inc.
  23. Vipulanandan et al. (2007) : "Parametric study of open core-hole on the behavior of drilled shafts socketed in soft rock", Proc of Geo-Denver 2007: Denver, Colo. Geotechnical Special Publication 158, pp.1-10.
  24. Zhang, L. and Einstein, H. H. (1998), "End bearing capacity of drilled shafts in rock", Journal of Geotechnical and Geoenvironmental Engineering, Vol.124(7), pp.574-584. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:7(574)
  25. Zhang, L. (2010), "Prediction of end-bearing capacity of rock-socketed shafts considering rock quality designation(RQD)", Canadian Geotechnical Journal, Vol.47, pp.1071-1084. https://doi.org/10.1139/T10-016