KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Compressive Strength of Assembled Column System Reinforced with Cross-Arms and Stayed Struts

수평재 및 사재로 보강된 조립기둥시스템의 압축강도 평가

  • Received : 2013.08.01
  • Accepted : 2013.10.01
  • Published : 2013.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The compressive strengths of simply supported columns may be significantly increased by reinforcing them with an assemblage of cross-arms and stayed struts connecting both ends of the columns and the cross-arm members. The purpose of the stayed struts and cross-arms is to introduce partial restraints against translation and rotation, thereby decreasing the effective buckling length of the column. In this study, buckling strengths of the assembled column system have been quantitatively evaluated from the theoretical methods based on both the equivalent spring model and the stiffness matrix formulation. And the results were compared with those from elastic/inelastic analysis using a finite element analysis package program, ABAQUS, for verification purpose. Expected compressive strength curves have been proposed for the assembled column system as a function of slenderness ratio of the simply supported column.

단순지지된 기둥부재의 중간 위치에 수평재를 설치하고, 그 수평재의 양단과 기둥부재 상하단을 스트럿으로 각각 연결하여 보강된 조립기둥시스템은 비보강 단순 기둥부재에 비하여 그 압축강도가 상당히 향상될 수 있다. 수평재가 설치된 기둥의 중간 지점에서 수평 및 회전 자유도를 제한하여 기둥의 유효좌굴길이를 줄이는 효과를 통해 강도향상이 구현된다. 본 연구에서는 기둥부재 이외의 구성요소를 스프링으로 치환한 등가 스프링모델 기법, 자유도를 최소화하여 단순화시킨 구조계에 대한 강성행렬 기법, 그리고 범용유한요소해석 프로그램을 활용한 탄성/비탄성 해석기법을 적용하여 보강된 조립기둥시스템의 압축강도를 정량적으로 산정하고 그 결과를 비교하였다. 보강대상이 되는 단순기둥의 세장비가 결정되면 조립기둥시스템을 구성을 통해 향상될 수 있는 기대압축강도를 산정할 수 있는 압축강도곡선이 제안되었다.

Keywords

References

  1. ABAQUS, Inc. (2004). ABAQUS Analysis user's manual, Ver. 6.5.
  2. AISC (2001). Manual of steel construction, Load and Resistance Factor Design, 3rd Ed.
  3. AISC (2011). Steel construction manual, 14th Ed.
  4. Andrade, SALde, Vellasco, PCGdaS, Silva, JGS. da. (2003). "Concepcao e projecto estrutural do palco principal do rock in rio III." Construcao Magazine, Vol. 6, pp. 4-11 (in Portuguese).
  5. Araujo, R. R. de, Andrade, S. A. L. de, Vellasco, P. C. G. da. S., Silva, J. G. S. da, Lima, L. R. O. de. (2008). "Experimental and numerical assessment of stayed steel columns." Journal of Constructional Steel Research, Vol. 64, pp. 1020-1029. https://doi.org/10.1016/j.jcsr.2008.01.011
  6. Chan, S. L., Shu, G. and Lu, Z. (2002). "Stability analysis and parametric study of pre-stresses stayed columns." Engineering Structures, Vol. 24, No. 1, pp. 115-124. https://doi.org/10.1016/S0141-0296(01)00026-8
  7. Chu, K. H. and Berge, S. S. (1963). "Analysis and design of struts with tension ties." Journal of Structural Division, ASCE, Vol. 89, No. ST1, pp. 127-163.
  8. Hafez, H. H., Temple, M. C. and Ellis, J. S. (1979). "Pretensioning of single-crossarm stayed columns." Journal of Structural Division, ASCE, Vol. 105, No. ST2, pp. 359-375.
  9. Hethout, I. A., Temple, M. C. and Ellis, J. S. (1967). "Buckling of space stayed columns." Journal of Structural Division, ASCE, Vol. 105, No. ST9, pp. 1805-1822.
  10. Kim, K. (2011). "A Study on elastic buckling strength of truss-stayed single column system." Journal of Korea Academia-Industrial Cooperation Society, Vol. 12, No. 12, pp. 5984-5989 (in Korean). https://doi.org/10.5762/KAIS.2011.12.12.5984
  11. Mauch, H. R. and Felton, L. P. (1967). "Optimum design of columns supported by tension ties." Journal of Structural Division, ASCE, Vol. 93, No. ST3, pp. 210-220.
  12. McGuire, W., Gallagher, R. H. and Ziemian, R. D. (2000). Matrix structural analysis, John Wiley & Sons, Inc.
  13. Saito, D. and Wadee, M. A. (2008). "Post-buckling behavior of prestressed steel stayed columns." Engineering Structures, Vol. 30, No. 5, pp. 1224-1239. https://doi.org/10.1016/j.engstruct.2007.07.012
  14. Saito, D. and Wadee, M. A. (2009). "Buckling behavior of prestressed steel stayed columns with imperfections and stress limitation." Engineering Structures, Vol. 31, No. 1, pp. 1-15. https://doi.org/10.1016/j.engstruct.2008.07.006
  15. Saito, D. and Wadee, M. A. (2009). "Numerical studies of interactive buckling in prestressed steel stayed columns." Engineering Structures, Vol. 31, No. 2, pp. 432-443. https://doi.org/10.1016/j.engstruct.2008.09.008
  16. Segui, W. T. (2007). Steel design, 4th Ed., Thomson.
  17. Smith, E. A. (1985). "Behavior of columns with pretensioned stays." Journal of Structural Division, ASCE, Vol. 111, No. 5, pp. 961-972. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:5(961)
  18. Smith, R. J., McCaffrey, G. T. and Ellis, J. S. (1975). "Buckling of a single-crossarm stayed column." Journal of Structural Division, ASCE, Vol. 101, No. ST1, pp. 249-268.
  19. Steirteghem, J. V., De Wiled, W. P., Samyn, P., Verbeeck, B. P. and Wattel, F. (2005). "Optimum design of stayed columns with split-up cross arm." Advances in Engineering Software, Vol. 36, pp. 614-625. https://doi.org/10.1016/j.advengsoft.2005.03.007
  20. Temple, M. C. (1977). "Buckling of stayed columns." Journal of Structural Division, ASCE, Vol. 103, No. ST4, pp. 839-851.
  21. Temple, M. C., Prakash, M. V. and Ellis, J. S. (1984). "Failure criteria for stayed columns." Journal of Structural Division, ASCE, Vol. 110, No. 11, pp. 2677-2689. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:11(2677)
  22. Wong, K. C. and Temple, M. C. (1982). "Stayed column with initial imperfection." Journal of Structural Division, ASCE, Vol. 108, No. ST7, pp. 1623-1640.