DOI QR코드

DOI QR Code

24kV급 배전반의 외함재질과 두께에 따른 Bus bar와 외함의 전자기 손실특성 분석

Analysis on Electromagnetic Loss Characteristics of Bus bar and Enclosure according to the Specifications of Enclosures for a 24kV Switchgear

  • 허정일 (한국교통대 첨단과학기술대 전기공학과) ;
  • 홍종기 (한국교통대 첨단과학기술대 전기공학과) ;
  • 강형구 (한국교통대 첨단과학기술대 전기공학과)
  • 투고 : 2012.10.31
  • 심사 : 2013.09.10
  • 발행 : 2013.12.01

초록

This paper deals with the electromagnetic loss characteristics of enclosures for a 24kV high voltage switchgear by using a finite element method (FEM). A study on the electromagnetic characteristics of enclosures for a high voltage switchgear should be conducted to minimize the size and the temperature rising of a switchgear. Generally, the enclosures made by stainless steel are used to minimize the eddy current loss caused by the transporting current in Bus bars due to its non-magnetic characteristics although the price of stainless steel is expensive compared with other metal for enclosures. Therefore, a switchgear made by stainless steel enclosures could be fabricated as a small size and are applied to a switchgear in urban substations. On the contrary, the switchgear enclosures made by steel could be fabricated with relatively cheap manufacturing price. However, the temperature easily rises due to the transporting current in Bus bars because steel is a ferromagnetic material. Therefore, the size of a switchgear made by steel enclosures is relatively massive and installed in rural substations. In this paper, the electromagnetic losses in the enclosures of a switchgear according to various enclosure thicknesses are calculated and compared with each other. Especially, we proposed a hybrid type enclosures for a switchgear made by stainless steel (top and bottom enclosure) and steel (left and right enclosure). It is concluded that the cost electromagnetic performance of applying the hybrid type enclosure is favorable to develop a high voltage switchgear.

키워드

참고문헌

  1. 이방욱, 강종성, 손종만, 최원준, 서정민, "대전류 통전시 배전반내의 열적 현상에 관한 연구", 대한전기학회 추계학술대회 논문집, pp. 1051-1053, 1999.
  2. Y. Nishikori, S. Kojima, and T. Kouno, Electrical Engineering in Japan, vol. 139, no. 26, 2002.
  3. 남석호, 강형구, "고전압 전력기기 개발을 위한 기중 절연파괴특성 분석에 관한 연구", KIEE Tran., vol. 60, no.5, pp.1005-1010, 2011. https://doi.org/10.5370/KIEE.2011.60.5.1005
  4. "한국물가정보", 2012. 10.
  5. 김중경, 한성진, "해석적 기법을 이용한 초고압 GIS용 삼상모선의 온도분포 해석", KIEE Trans., vol. 55B, no. 4, pp. 196-201, 2006.