References
- Wang, M. W. and Tseng, C. C., "Analysis and Fabrication of a Prism Film with Roll-to-roll Fabrication Process," Optics Express, Vol. 17, No. 6, pp. 4718-4725, 2009. https://doi.org/10.1364/OE.17.004718
- Lee, J., Meissner, S. C., and Sudol, R. J., "Optical Film to Enhance Cosmetic Appearance and Brightness in Liquid Crystal Displays," Optics Express, Vol. 15, No. 14, pp. 8609-8618, 2007. https://doi.org/10.1364/OE.15.008609
- Park, C. H., Oh, J. S., Shim, J. Y., and Hwang, J., "Development of a Large Surface Mechanical Micro Machining System & Machine," J. Korean Soc. Precis. Eng., Vol. 28, No. 7, pp. 761-768, 2011.
- Lee, D. Y., Song, K. H., Park, K. H., and Lee, S. W., "Machining Errors of Micro Patterns on Large Surfaces Caused by Temperature Variations," Proc. of KSPE Autumn Conference, pp. 527-528, 2011.
- Oh, J. S. and Park, C. H., "Investigation of Cogging Effect in Bisymmetric Dual Iron Core Linear Motor Stage," J. Korean Soc. Precis. Eng., Vol. 25, No. 10, pp. 115-121, 2008.
- Lee, J. C., Gao, W., Shimizu, Y., Hwang, J., Oh, J. S., and Park, C. H., "Precision Measurement of Carriage Slide Motion Error of a Drum Roll Lathe," Precision Engineering, Vol. 36, No. 2, pp. 244-251, 2012. https://doi.org/10.1016/j.precisioneng.2011.10.005
- Edlen, B., "The Refractive Index of Air," Metrologia, Vol. 2, No. 2, pp. 71-80, 1966. https://doi.org/10.1088/0026-1394/2/2/002
- Oh, J. S., Shim, J. Y., Song, C. K., and Park, C. H., "Design and Evaluation of Ultra Precision Roll Lathe for Large-scale Micro-structured Optical Films," Proc. of the EUSPEN international Conference, pp. 287-291, 2010.
- Oh, J. S., Shim, J. Y., and Park, C. H., "Performance Evaluation of Ultra Precision Roll Lathe for Flat Panel Industry," Proc. of the ICPT, pp. 178-179, 2010.
Cited by
- Current Status and Technical Issues of Ultra-precision Machine Tools vol.31, pp.3, 2014, https://doi.org/10.7736/KSPE.2014.31.3.189
- Design and analysis of aerostatic spindle with high load characteristics for large ultra-precision drum lathe vol.229, pp.12, 2015, https://doi.org/10.1177/1350650115579678
- Influence of Parameter Setting in an Oil Cooler on the Temperature Characteristics of an Ultra-precision Hydrostatic Table vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.571
- Precision measurement of Z-slide vertical error motion of an ultra-precision lathe by using three-probe method vol.18, pp.5, 2017, https://doi.org/10.1007/s12541-017-0078-4
- Experimental Investigation on Form Error for Slow Tool Servo Diamond Turning of Micro Lens Arrays on the Roller Mold vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101816