Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Review of Technology Trends for Ceramics Removal-Machining

세라믹스의 제거가공 기술 동향

  • Kwak, Jae-Seob (Dept. of Mechanical Engineering, Pukyong National University) ;
  • Kwak, Tae-Soo (Dept. of Mechanical Engineering, Gyeongnam National University of Science and Technology)
  • 곽재섭 (부경대학교 기계공학과) ;
  • 곽태수 (경남과학기술대학교 기계공학과)
  • Received : 2013.11.02
  • Accepted : 2013.11.18
  • Published : 2013.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Ceramic materials are classified by oxide, nitride and carbide material and have high brittleness, strength and hardness. Ceramic materials are strong in compression but weak in shearing and tension. This review paper has focused on technology trends and mechanism analysis of ceramics removal machining. The ceramic materials have superior mechanical, physical and chemical properties, but it is very hard to machining and the use of ceramics has been limited because of high strength and brittleness. In this paper, technology trends of ceramic removal-machining was introduced for types of machining technology, abrasive machining, cutting process, laser machining and so on.

Keywords

References

  1. Kwak, T., "Microstructure Analysis for Efficiency Grinding of Structural Ceramics," J. of the Korean Soc. Precis. Eng., Vol. 24, No. 10, pp. 31-36, 2007.
  2. Jang, S., Cho, M., Cho, W., and Lee, J., "Evaluation of R-curve Behavior Analysis and Machinability of Si3N4-hBN Machinable Ceramics," J. of the Korean Soc. Precis. Eng., Vol. 21, No. 1, pp. 61-70, 2004.
  3. Jung, Y. and Kang, J., "Grinding Characteristic of Advanced Ceramics," J. of the Korean Soc. Precis. Eng., Vol. 7, No. 2, pp. 105-112, 1990.
  4. Kang, J. and Lee, J., "Study on the Surface Grinding Machining of Fine-ceramics with high efficiency," J. of the Korean Soc. Precis. Eng., Vol. 7, No. 4, pp. 40-54, 1990.
  5. Lee, E., Lee, S., Whang, K., Chung, M., and Choy, T., "Development of Manufacturing Technology of Ceramics Ferrule for Optical Fiber Connector," J. of the Korean Soc. Precis. Eng., Vol. 9, No. 3, pp. 67-72, 1992.
  6. Kang, J. H., "A Study on the Grinding of Engineering Ceramics with High Quality using Conventional Grinding Machine," J. of the Korean Soc. Precis. Eng., Vol. 11, No. 3, pp. 149-161, 1994.
  7. Wang, D. H., Kim, W., and Shin, K., "Machining Characteristics according to the Wheel Wear in Surface Grinding for Structural Ceramics of Si3N4," J. Korean Soc. Machine Tool Eng., Vol. 12, No. 4, pp. 9-16, 2003.
  8. Choi, Y., Song, K., Park, K., Hong, Y., Kim, K., Lee, S., and Choi, H., "A Study on a Ultrasonic Vibration Assisted Grinding of Alumina Ceramic with Diamond Grinding Tool," J. of the Korean Soc. Manuf. Process Eng., Vol. 11, No. 1, pp. 13-19, 2012.
  9. Ohmori, H. and Nakagawa, T., "Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID(Electrolytic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels," Annals of the CIRP, Vol. 44, No. 1, pp. 287-290, 1995. https://doi.org/10.1016/S0007-8506(07)62327-0
  10. Won, J. and Lee, E., "Ultra Precision Lapping of Machinable Ceramic by In-process Electrolytic Dressing," J. of the Korean Soc. Machine Tool Eng., Vol. 12, No. 3, pp. 1-7, 2003.
  11. Kwak, T. and Ohmori, H., "Nano-Level Mirror Surface Machining Technology for SiC Ceramics Mirror," J. of the Korean Soc. Precis. Eng., Vol. 23, No. 6, pp. 29-36, 2006.
  12. Kwak, T., Ohmori, H., Lin, W., Eto, H., and Uehara, Y., "Ultraprecision Machining of Large-aperture Mirror for Space and Astronomical Telescope," J. of the Korean Soc. Precis. Eng., Vol. 24, No. 2, pp. 13-18, 2007.
  13. Kim, Y., Kwak, T., and Kim, K., "Mirror-surface Machining Properties of Structural Ceramics using Diamond Abrasives," J. of the Korean Ceram. Soc., Vol. 47, No. 4, pp. 290-295, 2010. https://doi.org/10.4191/KCERS.2010.47.4.290
  14. Kwak, T., "Properties of Mirror-surface Grinding for Metal Matrix Ceramic Composites," J. of the Korean Ceram. Soc., Vol. 49, No. 1, pp. 90-94, 2012. https://doi.org/10.4191/kcers.2012.49.1.090
  15. Aum, H., Roh, B., Lee, S., and Jang, T., "Development of Machining Apparatus for Ceramic Ball Bearing," J. of the Korean Soc. Mechanical Eng. A series, Vol. 22, No. 3, pp. 545-553, 1998.
  16. Rosensweig, R. E., "Fluid Magnetic Buoyance," J. AIAA, Vol. 4, No. 10, pp. 1751-1758, 1966. https://doi.org/10.2514/3.3773
  17. Kang, I., Kang, M., Kim, J., Kim, K., and Seo, Y., "A Study on the Ultrasonic Machining Characteristics of Alμmina Ceramics," J. of the Korean Soc. Manuf. Process Eng., Vol. 2, No. 1, pp. 32-38, 2003.
  18. Moon, H., Park, B., Lee, C., and Kim, S., "A Study on the Surface Roughness of Ceramics according to Ultrasonic Polishing," J. of the Korean Soc. Manuf. Process Eng., Vol. 2, No. 1, pp. 15-21, 2003.
  19. Park, S., Lee, B., and Choi, H., "Micro Hole Machining for Ceramics ($Al_2O_3$) Using Ultrasonic Vibration," J. Korean Soc. Machine Tool Eng., Vol. 13, No. 2, pp. 104-111, 2004.
  20. Kwak, T., "Machining Properties to Nano-Level Mirror Surface Finishing for Fine Grained WC-Co 18% Alloy using Magnetic Polishing Slurry," J. Korean Ceram. Soc., Vol. 46, No. 1, pp. 102-107, 2009. https://doi.org/10.4191/KCERS.2009.46.1.102
  21. Gam, J., Ha, J., Cheong, D., and Han, K., "Machinability and Strength of AlN-BN Ceramics," J. Korean Ceram. Soc., Vol. 31, No. 2, pp. 177-184, 1994.
  22. Lee, Y., Kim, J., Cho, W., Cho, M., Lee, E., and Lee, J., "Effect of h-BN Content on Microstructure and Mechanical Properties of AlN Ceramics," J. Korean Ceram. Soc., Vol. 40, No. 9, pp. 874-880, 2003. https://doi.org/10.4191/KCERS.2003.40.9.874
  23. Beck, S., Cho, M., and Cho, W., "Mechanical Properties and End-milling Characteristic of AlNhBN Based Machinable Ceramics," J. Korean Ceram. Soc., Vol. 45, No. 1, pp. 75-81, 2008. https://doi.org/10.4191/KCERS.2008.45.1.075
  24. Kim, D., Cho, M., Cho, W., Lee, E., and Lee, J., "A Study on the Micro Hole Drilling Characteristics of Si3N4-hBN Based Machinable Ceramics," J. of the Korean Soc. Precis. Eng., Vol. 21, No. 4, pp. 48-56, 2004.
  25. Ryu, G., Kim, H., Kim, H., Yang, S., Jang, K., and et al., "Ceramic Core Processing Technology for the Glass Mold of Aspherical Lenses using High-speed Cutting Machine," J. Korean Soc. Manufac. Process Eng., Vol. 11, No. 3, pp. 7-12, 2012.
  26. Yoon, B. and Kim, J., "A Study on the Machinability And Machining Properties of Composite Ceramics(TiC-Al2O3) by EDM," J. Korean Soc. Machine Tool Eng., Vol. 4, No. 4, pp. 61-68, 1995.
  27. Wang, D., Woo, J., and Yun, J., "Die-sinking Electrical Discharge Machining with Ultrasonic Emission for Ceramic Matrix Composite," J. of the Korean Soc. Precis. Eng., Vol. 16, No. 8, pp. 9-15, 1999.
  28. Youn, H., Lee, K., and Lee, D., "The Influence of Processing Condition and Assistance Gas in Microhole Machining of Al2O3 Ceramics," J. Korean Soc. Machine Tool Eng., Vol. 8, No. 5, pp. 115-120, 2003.
  29. Kim, S., Sohn, I., Noh, Y., Lee, J., and Jeong, S., "Precision Microdrilling of Alμmina Ceramic Substrates by Femtosecond Laser Ablation," J. Korean Soc. Laser Proc., Vol. 11, No. 1, pp. 25-31, 2008.
  30. Seo, W., Koo, Y., Ko, J., and Kim, G., "Optimization of Glass Wafer Dicing Process using Sand Blast," J. Korean Ceram. Soc., Vol. 46, No. 1, pp. 30-34, 2009. https://doi.org/10.4191/KCERS.2009.46.1.030