DOI QR코드

DOI QR Code

Estimation of compression strength of polypropylene fibre reinforced concrete using artificial neural networks

  • Erdem, R. Tugrul (Civil Engineering Department, Celal Bayar University) ;
  • Kantar, Erkan (Civil Engineering Department, Celal Bayar University) ;
  • Gucuyen, Engin (Civil Engineering Department, Celal Bayar University) ;
  • Anil, Ozgur (Civil Engineering Department, Gazi University)
  • 투고 : 2012.06.13
  • 심사 : 2013.07.10
  • 발행 : 2013.11.25

초록

In this study, Artificial Neural Networks (ANN) analysis is used to predict the compression strength of polypropylene fibre mixed concrete. Polypropylene fibre admixture increases the compression strength of concrete to a certain extent according to mix proportion. This proportion and homogenous distribution are important parameters on compression strength. Determination of compression strength of fibre mixed concrete is significant due to the veridicality of capacity calculations. Plenty of experiments shall be completed to state the compression strength of concrete which have different fibre admixture. In each case, it is known that performing the laboratory experiments is costly and time-consuming. Therefore, ANN analysis is used to predict the 7 and 28 days of compression strength values. For this purpose, 156 test specimens are produced that have 26 different types of fibre admixture. While the results of 120 specimens are used for training process, 36 of them are separated for test process in ANN analysis to determine the validity of experimental results. Finally, it is seen that ANN analysis predicts the compression strength of concrete successfully.

키워드

참고문헌

  1. Atici, U. (2011), "Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural network", Exp. Syst. Appl., 38, 9609-9618. https://doi.org/10.1016/j.eswa.2011.01.156
  2. Ashrafi, H.R., Jalal, M. and Garmsiri, K. (2010), "Prediction of load?displacement curve of concrete reinforced by composite fibers (steel and polymeric) using artificial neural network", Exp. Syst. Appl., 37, 7663-7668. https://doi.org/10.1016/j.eswa.2010.04.076
  3. Guang, N.H. and Zong, W.J. (2000) "Prediction of compressive strength of concrete by neural networks", Cement Concrete Res., 30, 1245-1250. https://doi.org/10.1016/S0008-8846(00)00345-8
  4. Kim, J.L., Kim, D.K., Feng, M.Q. and Yazdani, F. (2004), "Application of neural network for estimation of concrete strength", J. Mater. Civil Eng., 257-264.
  5. Lee, S.C. (2003), Prediction of concrete strength using artificial neural Networks, Eng. Struct., 25, 849-857. https://doi.org/10.1016/S0141-0296(03)00004-X
  6. Onal, O. and Ozturk, A.U. (2010), "Artificial neural network application on microstructure?compressive strength relationship of cement mortar", Adv. Eng. Softw., 41, 165-169. https://doi.org/10.1016/j.advengsoft.2009.09.004
  7. Prasad, B.K.R., Eskandari, H. and Reddy, B.V.V. (2009), "Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN", Construct. Build. Mater., 23, 117-128. https://doi.org/10.1016/j.conbuildmat.2008.01.014
  8. Słonski, M. (2010), "A comparison of model selection methods for compressive strength prediction of high-performance concrete using neural networks", Comput. Struct., 88, 1248-1253. https://doi.org/10.1016/j.compstruc.2010.07.003
  9. Siddique, R., Aggarwal, P. and Aggarwal, Y. (2011), "Prediction of compressive strength of self-compacting concrete containing bottom ash using artificial neural networks", Adv. Eng. Softw., 42, 780-786. https://doi.org/10.1016/j.advengsoft.2011.05.016
  10. Yeh, I.C. (1998), "Modeling concrete strength with augment-neuron networks", J. Mater. Civil Eng., 10(4), 263-208. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:4(263)
  11. Zurada, J.M. (1992), Introduction to Artificial Neural Networks, West Publishing.com.

피인용 문헌

  1. Prediction of acceleration and impact force values of a reinforced concrete slab vol.14, pp.5, 2014, https://doi.org/10.12989/cac.2014.14.5.563
  2. ANN based investigations of reliabilities of the models for concrete under triaxial compression vol.33, pp.7, 2016, https://doi.org/10.1108/EC-03-2015-0065
  3. Estimation of above water structural parameters and wind loads on ships vol.12, pp.8, 2017, https://doi.org/10.1080/17445302.2017.1316556
  4. Modeling of mechanical properties of roller compacted concrete containing RHA using ANFIS vol.19, pp.4, 2013, https://doi.org/10.12989/cac.2017.19.4.435
  5. Artificial neural network calculations for a receding contact problem vol.25, pp.6, 2013, https://doi.org/10.12989/cac.2020.25.6.551
  6. Artificial intelligence for the compressive strength prediction of novel ductile geopolymer composites vol.28, pp.1, 2013, https://doi.org/10.12989/cac.2021.28.1.055